LILYGO
-
LILYGO T-Dongle S3 ESP32-S3 Development Board
The T-Dongle S3 by LILYGO is a development board based on the ESP32-S3 microcontroller, designed for Internet of Things (IoT) applications. This board is available in two versions: one with a 0.96-inch ST7735 color LCD display and another without a display. Note: With TF Card, but...- From €17,68 EUR
€17,68 EUR- From €17,68 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Watch 2020 V3
The T-watch 2020 v3 is an open-source smartwatch that is highly customizable and can be used for a variety of applications. Specifications Parameter Description Chip ESP32-D0WDQ6-V3, with WiFi / Bluetooth FLASH 16MB SRAM 520 kB SRAM, 8MB PSRAM Custom function Power button (6S...- From €59,28 EUR
€59,28 EUR- From €59,28 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Keyboard ESP32-C3 Wi-fi and Bluetooth V4.2
T-Watch keyboard kit, which separates the keyboard from the T-Watch, adds WiFi, Bluetooth, and display functions, and sells it as a standalone product, allowing you to use it in more scenarios. Specifications MCU ESP32-C3, Secure, Low-power RISC-V MCU Wireless Connectivity Wi-fi and Bluetooth V4.2...- €31,10 EUR
€31,10 EUR- €31,10 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Embed CC1101
The LILYGO T-Embed CC1101 is a powerful embedded development board, particularly suited for Sub-GHz wireless communication applications. It features an integrated CC1101 transceiver and radio antenna, supporting multiple frequency bands (300-348 MHz, 387-464 MHz, and 779-928 MHz). Additionally, it can work with external wireless...- €78,00 EUR
€78,00 EUR- €78,00 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Deck Plus
Upgraded based on T-Deck, mainly added GPS module and Built-in 2000 mah battery.An external antenna connector is reserved on the case, you can connect it by opening the small hole in the case. 【Keyboard letter styles are sent randomly】 Product Information sample code...- From €98,80 EUR
€98,80 EUR- From €98,80 EUR
- Unit price
- per
Save €0,00 -
LILYGO T7 S3
T7 S3 is an ESP32 module based on ESP32-S3-WROOM-1, supports Wi-Fi Bluetooth 5, built-in Flash: 16MB PSRAM: 8MB. Onboard 'USB 3.0' 'Reset Switch' 'Power (PWR) Switch' '4-PIN' Support STEMMA QT/ Qwiic JST - SH 1.0mm Specification MCU ESP32-S3-WROOM-1 Xtensao 32-bit RISC-V MCU Support...- €13,52 EUR
€13,52 EUR- €13,52 EUR
- Unit price
- per
Save €0,00 -
LILYGO T5 V2.3.1
Due to the advantages like ultra-low power consumption, wide viewing angle, and clear display without electricity, it is an ideal choice for applications such as shelf labels, industrial instruments, and so on. Features No backlight keeps displaying the last content for a long time...- From €21,84 EUR
€21,84 EUR- From €21,84 EUR
- Unit price
- per
Save €0,00 -
LILYGO T5 e-Paper 4.7 Inch ESP32-S3 Development Driver Board
note: Due to the problem of the characteristics of the ink screen, it cannot be partially refreshed for a long time, otherwise, it will leave residual images and lead to irreversible damage. Specifications MCU ESP32-S3-WROOM-1-N16R8 Wireless Connectivity Wi-fi Bluetooth V5.0 Programming Environment Arduino-ide VS Code Onboard...- From €56,16 EUR
€56,16 EUR- From €56,16 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Watch S3
T-Watch S3 meets the needs of developers who want to experiment with LoRa and ESP32 S3 technology in wearable devices, highly customizable and usable in a variety of applications. Specifications MCU ESP32-S3 FLASH 16MB PS RAM 8MB Platform Arduino-IDE, ESP-IDF, VS Code, Micropython Wireless Wi-Fi: 802.11...- From €62,30 EUR
€62,30 EUR- From €62,30 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-SIM7600E/G/SA-H
T-SIM7600G-H R2 / T-SIM7600E-H Introduce T-SIM7600 is a wireless networking module with WIFI/Bluetooth/4G LTE CAT4 GPS. T-SIM7600X-H is ten times faster than T-SIM7600X's Download link (DL) and Upload Link (UL); LTE (Mbps) is optimized from 10(DL)/5(UL) to 150(DL)/ 50(UL) On this basis, we integrate a...- From €88,40 EUR
- From €88,40 EUR
- Unit price
- per
-
LILYGO T-RGB ESP32-S3 2.1/2.8 inch Round Display Touch Screen Development Board
T-RGB is the first circular touch display screen of LilyGo. The screen uses a 2.1/2.8inch ST7701S TFT LCD full-color display. The main control chip adopts ESP32-S3R8 Tensilica Xtensa Dual-Core LX7 Microprocessor, this chip supports Wi-Fi 802.11 b/g/n and Bluetooth 5. For half circle and full circle...- From €47,84 EUR
€51,90 EUR- From €47,84 EUR
- Unit price
- per
Save €4,06 -
LILYGO T-Relay Wireless 5V 4 Groups Relay Development Board
The T-Relay 4-Channel Relay Module is a versatile and powerful solution for controlling multiple devices through relays. With 4 relays, optocoupler isolation, and 16 expansion IOs, this module supports a wide range of communication protocols, including UART, SPI, I2C, CAN, I2S, and SDIO, making...- From €15,60 EUR
- From €15,60 EUR
- Unit price
- per
-
LILYGO T-QT Pro ESP32-S3 GC9A01 0.85 inch LCD module
Specification MCU ESP32-S3FN4R2 Xtensa LX7 microprocessor Wireless Connectivity Wi-Fi 802.11 b/g/n, BL V5.0+BLE Programming Platform Arduino-ide, Micropython Flash 4M PSRAM 2M Clock frequency 240Mhz Onboard functions IO00+IO47 Battery Detection IO04 LCD: GC9107 TFT IPS LCD LCD Resolution: 128*128px Support 4-Wire SPI interface Display Area...- From €1,56 EUR
€1,56 EUR- From €1,56 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-HMI
Details and Parameters of T-HMI Parameter Details MCU ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor Wireless Protocols 2.4GHz Wi-Fi and low-power Bluetooth (Bluetooth LE) Programming Platforms Arduino-ide, Micropython, PlatformIO-IDE Flash 16MB PSRAM 8MB Reed Switch Pin Position 1021 On-board Functions Boot button + Reset button...- €31,10 EUR
€31,10 EUR- €31,10 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Higrow
Pinout diagram This capacitive soil moisture sensor is different from most resistive soil moisture sensors. It uses the principle of capacitive sensing to detect soil moisture. This avoids the problem of easy corrosion of resistive sensors and significantly extends its service life. Product...- From €1,56 EUR
€1,56 EUR- From €1,56 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Embed IoT Embedded Panel for Programmable Development
LILYGO T-Embed is an IoT-embedded panel designed for programmable development. ABS+PC material (optional translucent version) panel + circuit board integrated standardized design, providing product 3D drawings and reference design drawings. Easy design to embed on your product. Note [For orange button]: Since the edge of...- From €43,68 EUR
€49,92 EUR- From €43,68 EUR
- Unit price
- per
Save €6,24 -
LILYGO T-Echo SotfRF LoRa SX1262 433/868/915MHz Wireless Module
LILYGO TTGO SotfRF T-Echo NRF52840 LoRa SX1262 433/868/915MHz Wireless Module L76K GPS 1.54 E-Paper BME280 Sensor for Arduino. It is a version that evolved from LILYGO T-BEAM. At the beginning of the design, more consideration was needed to adapting to Meshtastic and SotfRF, so Bluetooth and...- €88,40 EUR
€88,40 EUR- €88,40 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-ECHO Meshtastic LoRa SX1262 Wireless Module 433/868/915MHz NRF52840
LILYGO TTGO T-Echo is a version evolved from LILYGO T-BEAM. At the beginning of the design, more consideration was needed to adapt to Meshtastic. So Bluetooth and low-power consumption were considered when designing, and NRF52840 Advanced Bluetooth 5 was the selected thread and Zigbee...- €93,50 EUR
€93,50 EUR- €93,50 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Echo BME280 SotfRF LoRa SX1262 433/868/915MHz Wireless Module
LILYGO TTGO SotfRF T-Echo NRF52840 LoRa SX1262 433/868/915MHz Wireless Module L76K GPS 1.54 E-Paper BME280 Sensor for Arduino. LILYGO TTGO T-Echo is a version evolved from LILYGO T-BEAM. At the beginning of the design, more consideration was to adapting to Meshtastic and SotfRF, so Bluetooth and...- €103,90 EUR
€103,90 EUR- €103,90 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-ECHO BME280 Meshtastic LoRa SX1262 Wireless Module 433/868/915MHz NRF52840
LILYGO TTGO T-Echo is a version evolved from LILYGO T-BEAM. At the beginning of the design, more consideration was needed to adapt to Meshtastic. So Bluetooth and low-power consumption were considered when designing, and NRF52840 Advanced Bluetooth 5 was the selected thread and Zigbee...- €112,32 EUR
€112,32 EUR- €112,32 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Display S3 AMOLED, 1.91-inch Touch versions available
T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...- From €43,68 EUR
€43,68 EUR- From €43,68 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Display S3 AMOLED, 1.91 inch Touch Versions Available and Camera
T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...- From €10,30 EUR
€10,30 EUR- From €10,30 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Display S3 AMOLED V2.0, 1.91-inch no-touch versions available
T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...- From €38,48 EUR
€38,48 EUR- From €38,48 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Display S3 AMOLED V1.0, 1.91-inch no-touch versions available
T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...- From €39,52 EUR
€39,52 EUR- From €39,52 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Display ESP32 WiFi Bluetooth Development Board
Specifications MCU ESP32 Xtensa dual-core LX6 microprocessor Wireless Connectivity Wi-Fi 802.11 b/ g/ n, BL V4.2+BLE Programming Platform Arduino-ide、Micropython Serial chip CH9102 Optional Flash: 4M/16M Onboard functions Buttons: l006+I007, battery power detection Description For 1.14 inch ST7789V IPS LCD Resolution: 135 x 240...- From €14,56 EUR
€14,56 EUR- From €14,56 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Deck Portable microcontroller programmer
T-Deck is a pocket-sized gadget with a 2.8-inch, 320 x 240 pixel IPS LCD display, a mini keyboard, and an ESP32 dual-core processor. While it's not exactly a smartphone, you can use your programming knowledge to turn it into a standalone messaging device, or...- From €67,60 EUR
€67,60 EUR- From €67,60 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Beam Meshtastic ESP32 LoRa 923MHZ Wireless Module
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino. Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series Specifications...- €59,28 EUR
€59,28 EUR- €59,28 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Beam Meshtastic ESP32 LoRa 915MHZ Wireless Module
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino. Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series Specifications...- €57,20 EUR
€57,20 EUR- €57,20 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Beam Meshtastic ESP32 LoRa 868MHZ Wireless Module
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino. Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series Specifications...- €55,12 EUR
€55,12 EUR- €55,12 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Beam Meshtastic ESP32 LoRa 433MHZ Wireless Module
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino. Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series Specifications...- €51,90 EUR
€51,90 EUR- €51,90 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Bao T-WATCH AIOT 2MP OV2640 AI Camera
T-Watch K210 is a programmable watch kit based on K210, consisting of three base plates and screens. You can program T-Watch K210 via Arduino or MicroPython. Hardware parameters Main chip: K210 1.54-inch capacitive HD display: ST7789V Touchpad chip: FT6236U 2 million pixel HD camera: OV2640 Three-axis...- €134,16 EUR
€134,16 EUR- €134,16 EUR
- Unit price
- per
Save €0,00 -
LILYGO T Display S3 1.9 inch Touch Screen Development Board
T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication...- From €20,70 EUR
€20,70 EUR- From €20,70 EUR
- Unit price
- per
Save €0,00 -
LILYGO LoRa32 V2.1 ESP32 433/868/915MHZ 0.96 Inch OLED SD Card WIFI Module
The LILYGO Paxcounter Disaster-Radio LoRa V2.1_1.6.1 ESP32 is a versatile, high-performance module designed for a wide range of IoT applications, including passenger flow metering, disaster communication, and environmental monitoring. Powered by the ESP32 microcontroller, this module supports LoRa communication at frequencies of 433MHz, 868MHz,...- From €26,00 EUR
€26,00 EUR- From €26,00 EUR
- Unit price
- per
Save €0,00
