Heygears UltraCraft Reflex RS MSLA Resin 3D Printer Combo

€2.299,00

incl. VAT

SKU: Heygears-ReflexRSCombo

Combo: Reflex RS Combo

Reflex RS Combo Reflex RS Combo with Pulsing Release Module

Product variants

Quantity

Guarantee & Return Policy

Effective Date: December 10, 2025

At OpenELAB, we are committed to providing accurate product descriptions and high-quality electronics. The following policy outlines your rights and obligations, designed to be fair to both our customers and our business operations globally.

1. Warranty Policy

A. Standard Limited Warranty (Global & US)

For customers in the United States, Asia, and other non-EU regions:

Warranty Period: OpenELAB provides a 12-month warranty from the date of delivery.
Coverage: This warranty covers defects in material and workmanship under normal use.
Resolution: We will repair or replace defective units at no charge.

B. Statutory Rights for EU/UK Customers (EU Compliance)

If you are a consumer residing in the European Union or the UK purchasing from our global site:

Statutory Guarantee: You are entitled to a 24-month statutory guarantee for conformity defects present at the time of delivery, in accordance with EU consumer protection laws.
Relation: The Standard Limited Warranty (Section 1.A) applies in addition to, and does not replace, your statutory rights.

C. Warranty Exclusions (Applies to ALL Regions)

Warranty coverage is VOID if the damage is caused by:

Misuse: Incorrect installation, reverse polarity, or exceeding voltage limits.
Unauthorized Modification: This explicitly includes soldering, cutting pins, modifying the PCB, or flashing unauthorized/beta firmware that "bricks" the device.
Physical Damage: Drops, moisture/water damage, or electrical surges (lightning).
Normal Wear & Tear: Consumable parts (e.g., batteries), unless defective upon arrival.

Note: For non-warranty repairs (e.g., customer-induced damage), we may offer repair services for a fee. Shipping and diagnostic costs will be borne by the customer.

2. Return & Refund Policy

A. Return Window

Standard: You may request a return within 30 days of receiving your order.
EU Customers: You have the statutory right to withdraw from the contract within 14 days of receipt without giving a reason.

B. Refund Conditions & Restocking Fees

To protect against policy abuse, the refund amount is strictly determined by the condition of the returned item.

1. Full Refund (100%)

The item is Brand New, Unopened, and Unused.
The original packaging is intact and sealed.
All accessories are present.

2. Partial Refund (Restocking Fee / Value Depreciation)
If the item is returned in a condition that prevents it from being sold as new, OpenELAB reserves the right to deduct a Restocking Fee (or "Compensation for Loss of Value" for EU customers) from the refund.
Deductions apply if:

Signs of Use: Visible scratches, mounting marks on screw holes, or fingerprints.
Damaged Packaging: Original box is torn, written on, or missing.
Technical Modification: The device has been powered on, programmed/flashed, or soldered.
Broken Seals: Anti-static bags or security seals have been opened.

Depending on the severity of the usage/damage, the deduction may range from 15% to 50% of the product price. Items damaged beyond repair due to misuse will not be refunded.

C. Shipping Costs

Defective / Wrong Item: OpenELAB covers the return shipping cost.
Customer Remorse (Changed Mind / Ordered Wrong Item): The customer is responsible for all return shipping costs to our designated return center (located in the US, Germany, or China, depending on your region). Original shipping fees are non-refundable unless required by local law.

3. Return Process (RMA)

To ensure a smooth return process, please follow these steps:

Authorization: Contact us at info@openelab.io before returning any item. Returns without prior authorization will not be accepted.
RMA Number: We will provide you with a Return Merchandise Authorization (RMA) number and the correct return address.
Packing: Ship the item back in its original packaging with the RMA number clearly marked on the shipping label (not on the product box).
Tracking: We strongly recommend using a trackable shipping method. OpenELAB is not responsible for returns lost in transit.

Heygears UltraCraft Reflex RS MSLA Resin 3D Printer Combo

Shipping & Delivery Information

🚚 In-Stock Items: Orders for in-stock products are shipped within 24 hours after the order is placed.

📦 Pre-order Items: If a product is marked as "Pre-order", it means it is currently out of stock. We'll dispatch your order once we have restocked, usually within 10 working days. For special pre-sale items, the expected arrival date will be noted in the product description.

✈️ Express Shipping: Need your order urgently? Please contact us via email or live chat, and we’ll help arrange express delivery for you.

Test Model Results

Full-Field Precision Screen

LCD Screen Light Intensity Visualization

To achieve printing high accuracy and reliability, we partition the screen into 60 zones and calibrate it with a full-screen tool, ensuring light intensity variation remains within ±3%* for a printing tolerance of ≤0.05 mm.

Printed Results Assembly Comparison

The RS automatically calibrates the screen using NFC data, keeping light intensity differences within 5% and reducing variations in light intensity to ensure printing precision after screen replacement. (Data sourced from HeyGears Lab)

Adaptive Z-axis Compensation

Adaptive Process Packages

The adaptive process packages allows the RS printer to adjust the Z-axis compensation adaptively for each resin, to support up to 180 combinations of different angles, hole sizes, and edge types.

Z-axis Compensation Comparison

This approach minimizes deformation and resin buildup on support surfaces, and reduces post-processing time compared to using just a single z-axis compensation parameter.

The UltraCraft Reflex RS 3D printer is available in our store again!

Experience fully integrated workflows—from printing to washing to curing—without the need for additional parameter adjustments.

Product Highlights

Injection-molded Precision with 2 Hour Speed* (15 μm Precision).

Dynamic Motion Algorithm 3.0, 33% Increase in Print Speed.

Auto Resin Level Detection.

UltraCraft Wash: Minimal Contact with Resin.

UltraCraft Cure: Dual UV Wavelength Curing for Greater Material Performance. Extra Heating Function.

Fully Interconnected Print Strategies. No Parameter Adjustments Throughout the Whole Process.

Specifications

3D Printing Technology: LCD (MSLA)
Build Volume: 222*122*230 mm
XY Native Pixel: 29.7 μm
Accuracy: ±15 μm
Layer Thickness: 30-100 μm
Optical Wavelength: 405 nm
Size: 380*360*584 mm
Weight: 20 kg
Rated Power: 180 W
Voltage: 100-240 V~50/60 Hz
Size: 380*360*584 mm
Connectivity: USB/WIFI/LAN
Language: English, Simplified Chinese

Auto Assisted Printing

Floating Screen Auto Leveling

Automatic Resin Refill

Automatic Resin Heating

Data from HeyGears Lab, using a layer thickness of 50 μm and model height under 7 cm; printing results may vary per model.

With RS Heated & Pulsing Release Resin Tank or Pulsing Release Module (purchased seperately)

Package Includes

Reflex RS Combo (Full Price 2,550 Euro, including VAT and shipping within EU & UK):

UltraCraft Reflex RS 3D Printer x1

UltraCraft Wash x1

UltraCraft Cure x1

Reflex RS Combo with Pulsing Release Module (Full Price 3,400 Euro, including VAT and shipping within EU & UK):

UltraCraft Reflex RS 3D Printer x1

UltraCraft Wash x1

UltraCraft Cure x1

UltraCraft Pulsing Release Module x1

UltraCraft Reflex RS Heated & Pulsing Release Resin Tank x1

Built for High Speed 4.5 s/layer, Average Printing Speed

Data sourced from HeyGears Lab. With high-speed water-washable resin PAWW10, the average printing speed for lattice models reaches 4.5s/layer. The printer frame flex within ±2 μm. Cools screen temperature by up to 10℃ during printing.

Dynamic Motion Algorithm 3.0, 33% Increase in Print Speed

Data sourced from HeyGears Lab, utilizing PAWW10 water-washable resin, comparedto conventional motion control 3D printing. The exact speed increase may vary based on model.

Single-Layer Dynamic Motion Control

Utilizing aseven-segment motion control logic per layer, the RS reads real-time force sensor data at 80 times per second, allowing it to adjust motion parameters efficiently, reducing redundant time and preventing printing failures.

Comprehensive Dynamic Motion Control

This algorithm assesses printing difficulty for each layer using factors like cross-sections, part spacing, and quantity, selecting from 18 optimized motion control parameters to ensure quality while enhancing speed.

Printing Results Comparison

Complete Pre-processing in Just One Minute

One-click slicing without manual adjustment.

Automatic Repair Prevents Failures

Automatically detects and repairs model defects such as inverse normals, holes, and intersecting shells.

Automatic Pre-processing

Intelligently configured scaffold supports result in reduced detachments and a higher printing success rate.

Residue Detection

Force sensors with a sensitivity of 0.1 N can detect resin residue as small as 0.2 mm and can auto-stop upon detection or print failure.

Printing Analysis

A report is produced after each print to accurately identify issues.

Floating Screen Auto Leveling

A floating screen system with a deviation of 0.15° eliminates gaps of up to 240 µm* for automatic leveling.

Automatic Resin Heating

The optional RS heated resin tank uses an integrated heater for higher efficiency. It can elevate resin temperature from 50 °F (10 °C) to an optimal 73 °F (22 °C) in 20 minutes*, auto heating maintains this temperature throughout the printing process for optimal results.

*Requires a separate purchase of the RS Heated & Pulsing Release Resin Tank*Data sourced from HeyGears Lab

Automatic Resin Refill

Automatic resin refill before and during printing.

- Pre-Ordering: If an item is unavailable, you can pre-order it. We'll dispatch once stock is replenished, usually within 10 working days. Special pre-sale products will specify the expected arrival time in the description.

- Express Shipping: Need it faster? Contact us via email or through our live chat support, and we'll arrange expedited delivery for you.

1. General Shipping Information

We provide premium shipping methods with a tracking number for each order.
Shipping address should be input in English without any special symbols to help the courier company recognize your address in the system. We will ship according to the shipping address you provided. Please notify us of any address change before your order is marked "Shipped" to avoid parcel loss.
Please contact our customer service staff immediately if you need to cancel or change an order. Once your order has reached "Shipped" status, it can no longer be canceled or changed in any way. To avoid complications, please recheck your shopping cart before checkout.
We can ship all in-stock orders within 1 business day as your order has been confirmed.
All items are inspected before dispatch and are carefully hand-packed.
With standard courier practice, you need to check the contents of the parcel before signing for your goods. Otherwise, we will not be held responsible for any damage that may have occurred in transit.

2. Shipping Options for Germany, EU* countries and US

(For Products in Munich Warehouse, Long Beach Warehouse)

2.1 Orders with a value not exceeding €5:

Shipping Options:

Shipping Options	Germany	EU*
Deutsche Post	€6 Arrive in 3-4 Business Days	€15 Arrive in 5-9 Business Days

Shipping Options	Continental U.S.	Non-Continental U.S.
USPS Ground Advantage	€7.95 Arrive in 3-7 Business Days	€8.95 Arrive in 5-9 Business Days
UPS Express	€13.95 Arrive in 2-4 Business Days	€17.95 Arrive in 3-7 Business Days

2.2 Shipping options for an order value between €5 and €30 inside Germany, €5 and €50 inside the EU, or €5 and €45 in the U.S.:*

Shipping Options:

Shipping Options	Germany	EU*
Deutsche Post	€3.5 Arrive in 3-4 Business Days	€6 Arrive in 5-9 Business Days
DHL Paket	€6 Arrive in 2-3 Business Days	€15 Arrive in 3-7 Business Days
DHL Express	€14 Arrive in 1-2 Business Day	€65 Arrive in 2-3 Business Days

Shipping Options	Continental U.S.	Non-Continental U.S.
USPS Ground Advantage	€4.95 Arrive in 3-7 Business Days	€6.95 Arrive in 5-9 Business Days
UPS Express	€11.95 Arrive in 2-4 Business Days	€13.95 Arrive in 3-7 Business Days

2.3 Free shipping options for an order value of above €30 inside Germany, €50 inside the EU* or €45 in US :

Free Shipping Options	Germany	EU*
Deutsche Post	Free Above €30	Free Above €50
DHL Paket	+ €2 for Above €30 / Free Above €60	+ €8 for Above €50 / Free Above €80
DHL Express	+ €10 for Above €30	+ €60 for Above €50

Free Shipping Options	Continental U.S.	Non-Continental U.S.
USPS Ground Advantage	Free above €45	Free above €60
UPS Express	+ € 8.95 for Above €45	+ € 11.95 for Above €45

Certain EU Countries are not included in our EU Zone definition: United Kingdom (excluding Ireland), Switzerland, Liechtenstein, Vatican City, Albania, Belarus, Norway, Ukraine, and Iceland. For the above countries, the International Shipping Rule applies.
The regions in the Non-Continental U.S. include: Alaska, American Samoa, Guam, Hawaii, the Marshall Islands, the Northern Mariana Islands, Palau, Puerto Rico, the U.S. Virgin Islands, the Armed Forces of America, the Armed Forces in Europe, the Armed Forces in the Pacific, and the U.S. outlying islands. The shipping and delivery to these areas are subject to the Non-Continental U.S. shipping rules.

2.4 Shipping Options for International Countries:

(via Deutsche Post or YunExpress)

Order Amount	International
€0 - €15	€8
€15 - €30	€7
€30 - €50	€6
€50 and above	€4

Important Notice:

Please verify the inventory location on the product page before placing your order to confirm delivery timeframes.
For products in the Shenzhen warehouse, we will typically first ship the products from the Shenzhen warehouse to our Munich warehouse or Long Beach warehouse, which will take around 1.5 weeks. After we receive the shipment in Munich/ Long Beach, we will send the items to you. We will only arrange YunExpress shipping from Shenzhen for orders with products in the Shenzhen warehouse worth more than €50.
If you place an order with products from both Munich and Shenzhen warehouses, we will first ship the products in the Munich warehouse, and then send the remaining products to you when we receive them from Shenzhen.

3. International Warehouse

Our products are stored in both our Munich and Shenzhen warehouses to provide more flexible logistics solutions tailored to different regions and customer needs. On each product's description page, we indicate the specific warehouse location to help you better plan your purchase and delivery schedule.

3.1 German Warehouse

For products stored in our warehouse in Munich, we use either Deutsche Post or DHL for shipping, depending on the size of the package. Logistics within Germany are very efficient, with an estimated delivery time of 2-4 business days, ensuring you receive your order quickly and conveniently. For Western EU countries, the estimated delivery time is 4-6 business days. For Eastern EU countries, the estimated delivery time is 6-8 business days.

3.2 US Warehouse

For products stored in our warehouse in Long Beach, we use either USPS or UPS for shipping, depending on the size of the package. Logistics within U.S. are very efficient, with an estimated delivery time of 3-7 business days, ensuring you receive your order quickly and conveniently.

3.3 Chinese Warehouse

We will only arrange YunExpressexpress shipping from Shenzhen for orders with products in the Shenzhen warehouse worth more than €50. Orders directly shipped from our Shenzhen warehouse are handled by YunExpress. Given the complexities of international shipping, the estimated delivery time for these packages is around 10 business days, though this may vary slightly due to customs processes or other uncontrollable factors. Otherwise, the products will first be shipped from China to our Munich warehouse and then shipped to the final destination.

To ensure that your order is delivered within your desired timeframe, we recommend reviewing the warehouse information provided on the product pages before placing your order and selecting the appropriate shipping option. If you have any questions or need further assistance, please don't hesitate to contact our customer support team—we are here to help you!

4. Customs and Taxes

4.1 How are customs handled by OpenELAB for import or export?

Whether shipped from Germany or China, we cover all import duties and taxes, ensuring that you receive your package without any additional costs or hassle with customs.

4.2 How is VAT charged when the Customer places an order from OpenELAB?

In accordance with the newest VAT e-commerce rules in the EU, OpenELAB shall have the right to charge the amount of VAT. The standard rate of actual VAT applied is subject to the European government's freedom to set the number and level. Such an amount of VAT will be charged when you place an order from OpenELAB. Please contact OpenELAB if you have any questions when you pay such VAT.

4.3 What kind of fee will be charged except VAT?

Except for the VAT, OpenELAB will charge any handling fee when you are placing any purchase orders, which includes but is not limited to customs duty, import VAT, freight costs, etc. Customs duty and import VAT will be paid on the importation of goods from outside the EU into an EU country, and such amount is calculated as a percentage of the customs value of goods. Please note that it may take 1-2 working days for Deutsche Post/DHL/FEDEX or 3-4 working days for YunExpress for the status to update.