Accessories - Programmer / Adapter

Note: All products are tax-inclusive. Description ATOM MATE is a DIY expansion kit specifically designed for the ATOM series. The kit includes three types of accessories.AtomPin: It is a pin breakout board that allows you to access the pins on the bottom of the ATOM...

The CH340E USB to TTL is a converter module used to transform a USB interface into a serial TTL signal. It features the CH340E chip, known for its compact design and stable communication performance, making it ideal for embedded development, microcontroller programming, and debugging....

The CH340G USB to TTL is a commonly used serial communication converter module that transforms a USB interface into a serial TTL signal for connecting computers to embedded devices or microcontrollers. It supports various baud rates and is compatible with both 5V and 3.3V...

The main chip is CP2102, which creates a virtual COM port after driver installation. Powered via USB, with output interfaces including 3.3V (<40mA), 5V, GND, TX, and RX. The signal pin level is 3.3V, positive logic. Equipped with onboard status and transmission indicator lights....

Set consisting of one ESP8266-01S and one USB adapter! Large range through Wlan 802.11 b/g/n standard! Universal use thanks to three available operating modes: Wlan Router (AP), Wlan Client (STA) and both at the same time (AP + STA)! Thanks to powerful 80MHz processor...

Our FT232 USB-TTL-Serial adapter is one of the most used adapters on the market. The practical USB-TTL-Serial adapter is used to connect a device with serial interface (UART) to a USB interface, for example to your PC. Particularities The Adapter enables a UART data...

Note: All products are tax-inclusive. StampISP is an ESP32 programming tool with USB to serial port in STAMP series package, using CH9102 chip inside, and built-in 3.3V DCDC circuit, 5V power supply and USB D+/D- signal line led out on the side of the...

The MKS CANable V1.0 module is an upgraded version of the CANable, capable of communication at data rates up to 1Mbit/s in the fast phase of CAN, making it ideal for product debugging, CAN bus control, and high-speed CAN applications in the automotive industry....

The MKS CANable Pro (With Isolation Chip) is a high-performance CAN bus interface module with an integrated isolation chip, designed for connecting and debugging CAN bus devices. It features the STM32F072C8T6 microcontroller and the ADM3053BRWZ isolated CAN communication chip, which ensures stable data transmission...

Technical specifications✔️Input voltage: 2V - 24V✔️Output voltage: 3V - 28V✔️Output current: max. 2A✔️Size: 36 mm x 17 mm x 6.5 mm / approx. 2 grams✔️Solder connections Pin definition: input to IN- IN+ / output to OUT- OUT+.✔️Permissible ambient temperature: -45° C to +85° C✔️1.2...

The PL2303HX USB to TTL Converter is designed to meet the needs of developers, hobbyists, and professionals working with embedded systems, firmware upgrades, and serial communication. Here's a comprehensive look at its features, applications, and the benefits it brings:   Features High-Performance Chipset: The converter employs...

The USB to CAN is a converter module used to transform a USB interface into a CAN bus interface, widely applied in fields such as industrial automation, automotive electronics, and robotics for CAN bus network communication. It connects to a computer via the USB...

The USB to CAN (With Isolation Chip) is a converter module that transforms a USB interface into a CAN bus interface, providing electrical isolation to enhance system safety and anti-interference capabilities. This module is widely used in industrial automation, automotive electronics, and robotics, where...

The USB to RS232 (CH340 Chip) communication module with two-way TVS protection is designed to provide stable and efficient data communication between a computer and RS232 devices. It is ideal for industrial automation, serial device communication, and legacy equipment integration. This module leverages the...

The USB to RS485/RS232/RS422 Communication Module, equipped with the CH340 Chip, serves as a versatile and reliable instrument designed to convert USB signals into three distinct serial communication standards: RS485, RS232, and RS422. This module is extensively utilized in industrial automation, data acquisition, and communication...

The WisdPi 5Gbps USB3.2 Wired Base-T Ethernet Adapter featuring the Realtek RTL8157 chip is a high-performance network adapter designed to provide stable and fast internet connectivity. It supports speeds up to 5Gbps and is compatible with USB 3.2 Gen1/2 and USB 2.0. The adapter is energy-efficient, consuming under...

This expansion board is designed based on ASMedia's ASM2464PD specifications and serves primarily to convert USB4 or Thunderbolt 3/4 interfaces to standard PCIe/NVMe connections. ASM2464PD represents a new generation of USB4®/Thunderbolt to PCIe/NVMe accessory controllers, incorporating ASMedia's proprietary PHY designs. The USB4/Thunderbolt technology facilitates...

Features 5G High-Speed Transmission: Offering speeds up to 5 times faster than traditional gigabit rates, ensuring swift file transfers, seamless HD video streaming, and lag-free online gaming. PCIe to 5G RJ45: It accommodates various PCI Express slot configurations, such as x1, x4, x8, and...

The module features a black PCB circuit board with high quality, equipped with a standard 3.81mm connector and an additional pin header interface. It adopts TI's official VP230 chip solution (SN65HVD230DR). The board includes a power indicator light to show the power status and...

Data transfer is the process of converting data from one representation to another. A comprehensive software upgrade inevitably leads to a complete database upgrade. Each software has its own structure and data storage format for the underlying database, which can differ from one another....

Note: All products are tax-inclusive. ESP32-Downloader is a USB-to-UART converter. It can be used to download firmware form PC to Microprocessor devices. TXD led, RXD led, Power led and 6pin @ 2.54mm bus sockets. This product is EOL now. Product Features USB-TTL USB TypeC interface...