Arduino
Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards and modules are ideal for beginners and professionals. They provide the perfect foundation for a wide range of projects, from simple DIY electronics to complex automation systems. With a vast selection of microcontrollers, sensors, and shields, Arduino makes it easy to create interactive devices and IoT applications. Supported by extensive documentation, tutorials, and a thriving global community, Arduino empowers you to turn your ideas into reality.
-
ELAB-ATmega328DIP Board Microcontroller BoardAZ-ATmega328DIP Board Microcontroller Board ATmega16U2 8-bit Developer Board with USB Cable ✅ Easy programming via USB the cable and solderless pins allow even beginners to start projects immediately. ✅ 14 digital inputs and outputs & 6 analog inputs, allowing the microcontroller to be used...
- From €11,99 EUR
€11,99 EUR- From €11,99 EUR
- Unit price
- per
Save €0,00 -
Original Arduino UNO R3 Development Board Atmega328PThis board introduces you to the unique Arduino experience, making it perfect for learning the basics of sensors and actuators. It's also an essential tool for rapid prototyping. The Arduino Uno is the most widely used and documented board in the world. The name...
- €25,20 EUR
€25,20 EUR- €25,20 EUR
- Unit price
- per
Save €0,00 -
Seeed Studio XIAO SAMD21 Arduino MicrocontrollerHigh Performance: Powered by SAMD21G18 chip, operating up to 48MHz, equipped with 32KB of SRAM, and 256KB of onboard flash memory Ultra-small Design: 21 x 17.5mm, Seeed Studio XIAO series classic form factor, suitable for wearable devices Multiple Development Interfaces: 11x analog / 11x digital Pins, 1x I2C interface,...
- €6,99 EUR
€6,99 EUR- €6,99 EUR
- Unit price
- per
Save €0,00 -
Uno R3 Compatible Arduino Uno R3The upgraded and original versions both use the MEGA328P as the main control chip, with the upgraded version using a more compact SMD package. This version uses the CH340G USB-to-serial chip, which is more cost-effective and compatible with Win7/Win8/Win10. The interface is designed according...
- €5,90 EUR
€5,90 EUR- €5,90 EUR
- Unit price
- per
Save €0,00 -
Mega 2560 R3 CH340 Compatible ArduinoThe KEYES CH340 MEGA2560 R3 compatible Arduino development board features the ATmega2560 microcontroller, with 54 digital input/output pins (15 of which can be used as PWM outputs), 16 analog inputs, a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and...
- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
Save €0,00 -
ATmega32u4 Leonardo Mini Compatible ArduinoThis is a development board based on the Atmel ATmega32U4 microcontroller. For ease of use, we also provide a USB cable. Using the 16 MHz crystal oscillator, the microcontroller offers 8-bit resolution, 32 KB of flash memory, and 2.5 KB of RAM. A key...
- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
Save €0,00 -
Pro Micro ATMEGA32U4 Compatible ArduinoKeyes Pro Micro is a mini microcontroller board developed based on the Atmega32U4 chip. This development board is compatible with all Arduino features and techniques. It includes: 4 analog inputs, 5 PWM (Pulse Width Modulation) pins, 12 digital input/output ports, and hardware serial connections for...
- €8,90 EUR
€8,90 EUR- €8,90 EUR
- Unit price
- per
Save €0,00 -
UNO R3 Dev Board Compatible With Arduino Uno R3 - OpenELABUno R3 is a microcontroller board based on the ATmega328 (datasheet), fully compatible with ARDUINO UNO REV3. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a...
- €17,85 EUR
€17,85 EUR- €17,85 EUR
- Unit price
- per
Save €0,00 -
W5500 Ethernet Dev Board for Arduino - OpenELABW5500 is based on the microcontroller of Arduino Ethernet. We have integrated USB download, TF card slot and more functions on it, fully compatible with UNO pins.You can quickly make your controller access to the internet to build your network application.Onboard comes with a...
- €22,50 EUR
€22,50 EUR- €22,50 EUR
- Unit price
- per
Save €0,00 -
UNO R3 Motor Driver PLUS Dev Board - OpenELABMotor PLUS development board is a control board fully compatible with the Arduino IDE development environment.It is as same as the UNO R3 board. In addition, we also made some improvements.Two DC motor drive modules on the board can control one or two DC...
- €18,50 EUR
€18,50 EUR- €18,50 EUR
- Unit price
- per
Save €0,00 -
UNO MAX Dev Board Onboard - OpenELABThe UNO MAX main control board uses an Atmega328p main control chip, and integrates a CP2102 USB to serial port module, an RT6212AHGJ6F DC-DC power module, an RT9167A-33GB DC-DC power module, two separate buttons, two 6812 RGB lights, a microphone, an 8x16 dot matrix,...
- €19,90 EUR
€19,90 EUR- €19,90 EUR
- Unit price
- per
Save €0,00 -
PRO MICRO 5V 16MHZ Dev Board For Arduino - OpenELABThe processor core of the PRO MICRO development board is ATMEGA32U4-MU, fully compatible with ARDUINO.It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable to get started. It has 18 digital input/output pins (of which 5...
- €13,50 EUR
€13,50 EUR- €13,50 EUR
- Unit price
- per
Save €0,00 -
MAX Dev Board Compatible Arduino UNO R3 - OpenELABMax development board is an Arduino uno-compatible board, which is based on ATmega328P MCU, and with a cp2102 Chip as a UART-to-USB converter.MAX development board integrates three LEDs, two 6812RGB LEDs, two button switches, a buzzer, a microphone sensor, a light sensor, and an...
- €22,00 EUR
€22,00 EUR- €22,00 EUR
- Unit price
- per
Save €0,00 -
Pro Mini ATMEGA328P Dev Board For Arduino - OpenELABKeystudio Pro Mini is a small microcontroller board based on the ATmega328, intended for use on breadboards and when space is at a premium.It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, a 16 MHz...
- €9,20 EUR
€9,20 EUR- €9,20 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 8833 Motor Driver Expansion Board PH2.0 USB Cable DC 6-9VThe 8833 motor driver expansion board uses PH2.0 terminals and an 8833 motor driver chip driven by the two-channel H bridge whose largest current can be up to be 1.5A. It also integrates an IR receiver, ultrasonic sensor ports, analog ports, line tracking interfaces,...
- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
Save €0,00 -
Multi-purpose shield V2 W/Gift Box - OpenELABMulti-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connection. Download the program to complete experiment.It is multi-purpose and we offer code libraries of all modules that have been tested. You can use them directly. There are extension...
- €8,90 EUR
€8,90 EUR- €8,90 EUR
- Unit price
- per
Save €0,00 -
TB6612FNG Motor/Servo Drive Shield with PS2 Socket - OpenELABMotor/servo driver expansion board is used with plus development board and UNO R3 development board. It extends the pin ports in the form of a servo wire sequence. What’s more, the board sets a serial communication interface, a PS2 interface as well as a...
- €12,50 EUR
€12,50 EUR- €12,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB DMX (RDM)Shield Control Speakers Light Smoke MachineThis DMX(RDM) shield is designed for Arduino. Its working voltage is 5V and has 0.5W power consumption.It can transmit and receive DMX through Arduino so as to control speakers, light and smoke machines. If you get tired of the programming language, you also can...
- €18,50 EUR
€18,50 EUR- €18,50 EUR
- Unit price
- per
Save €0,00 -
W5100 Ethernet Shield Board with SD Card - OpenELABW5100 Ethernet Shield gives you an easy way to get your Arduino Online. It can turn your Arduino into a simple web server or use the Internet to read /write its digital and analog outputs/inputs.Compatible with the UNO R3 board and Mega 2560 R3.It...
- €17,50 EUR
€17,50 EUR- €17,50 EUR
- Unit price
- per
Save €0,00 -
Expansion Board+TF Card for Data Recording - OpenELABWhen we conduct DIY experiments, we tend to connect some sensors with Arduino microcontrollers to detect all kinds of data. And we will need to save these data and record the saving time for follow-up studies. Therefore, we have designed this expansion board to...
- €8,55 EUR
€8,55 EUR- €8,55 EUR
- Unit price
- per
Save €0,00 -
Solar Charger Shield for Arduino Solar Panel Solar Cell - OpenELABSolar charger shield boasts the features of collecting energy, power management, and charging, as a stacked shield and compatible with the UNO R3 control board. On this shield, BAT interface could output 5V when connected 3.0V-4.2V rechargeable batteries. At the same time, the USB...
- €9,65 EUR
€9,65 EUR- €9,65 EUR
- Unit price
- per
Save €0,00 -
NANO Shield with DC port for arduino Nano3.0 - OpenELABWe particularly design this shield to make up the problem of connecting the sensor shield to the key studio NANO control board. This NANO shield has extended the digital and analog ports out as 3PIN interface (G-GND V-5V S-digital port/analog port) It also breaks...
- €8,50 EUR
€8,50 EUR- €8,50 EUR
- Unit price
- per
Save €0,00 -
quick Connectors Motor Drive Shield for Arduino Robot Car - OpenELABThere are many ways to drive the motor. Our robot uses the most commonly used L298P solution. L298P is an excellent high-power motor driver IC produced by STMicroelectronics. It can directly drive DC motors, two-phase and four-phase stepping motors. The driving current up to 2A, and output terminal of...
- €13,50 EUR
€13,50 EUR- €13,50 EUR
- Unit price
- per
Save €0,00 -
NANO Shield Board W/ Power Switch for Arduino Nano - OpenELABNano ch340 is a tiny control board based on Arduino platform, which is deeply popular. However, if want to connect several sensor modules to Nano ch340, and connect external power, we need to use breadboard and a bunch of jumper wires, which is pretty...
- €8,65 EUR
€8,65 EUR- €8,65 EUR
- Unit price
- per
Save €0,00 -
W5500 Ethernet Control Expansion Board - OpenELABW5500 network shield comes with a W5500 network module as core.It can be made as the simple Web server, or write and read the High/Low level of digital pins, or analog value of analog pins via network control.It is compatible with both UNO R3...
- €15,50 EUR
€15,50 EUR- €15,50 EUR
- Unit price
- per
Save €0,00 -
Quick Connectors Motor Drive Shield V2 for Arduino Robot - OpenELABThere are many ways to drive the motor. Our robot uses the most commonly used L298P solution. L298P is an excellent high-power motor driver IC produced by STMicroelectronics. It can directly drive DC motors, two-phase and four-phase stepping motors. The driving current is up...
- €15,50 EUR
€15,50 EUR- €15,50 EUR
- Unit price
- per
Save €0,00 -
Updated Version Keyestudio L298P Shield With Power SwitchKeyestudio L298P Shield is a two-way DC motor drive shield with L298P as the core. The green terminal blocks on the shield are connected to VIN GND of UNO R3; simply power the board via terminal blocks or DC jack on the UNO R3. The...
- €15,50 EUR
€15,50 EUR- €15,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB CAN-BUS Shield MCP2515 chip With SD SocketOpenELAB CAN-BUS Shield is particularly designed for Arduino controllers.The onboard BUS control chip can realize the data control on the CAN bus and data communication between devices.It is compatible with the Arduino UNO standard interface; can be perfectly adapted to the main control boards...
- €11,50 EUR
€11,50 EUR- €11,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Balance Car Shield V3 for Arduino UNO R3You might envy those who can easily drive the gravity balance car on the street. So cool! How to DIY a mini balance car on your own? You can combine this shield with the UNO R3 control board to make a balanced car based...
- €15,50 EUR
€15,50 EUR- €15,50 EUR
- Unit price
- per
Save €0,00 -
Scratch Shield board for Arduino Nano - OpenELABScratch shield is used with Arduino Nano. Using the Scratch programming language, you can easily create simple interactive programs with Arduino or create programs based on the input of Arduino from sensors.Robotale Scratch incorporates a light sensor, sound sensor, a button, and a slider,...
- €9,75 EUR
€9,75 EUR- €9,75 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 2.8 inch 240*320 TFT LCD Shield for Arduino UNO R3This is a key studio 2.8-inch TFT LCD shield with touchscreen. This TFT display is driven with an ILI9325 chip and has 240x320 pixels with individual RGB pixel control. This display has a resistive touchscreen attached to it already, so you can detect finger presses...
- €17,95 EUR
€17,95 EUR- €17,95 EUR
- Unit price
- per
Save €0,00 -
GPS Shield with SD slot +Antenna for Arduino UNO R3 - OpenELABIn life, it is becoming more and more popular to use GPS positioning. As for Arduino MCU DIY experiments, is there a GPS positioning shield that can be compatible with the Arduino MCU?Well, use this GPS shield. It is based on the NEO-6M-0-001 module,...
- €17,95 EUR
€17,95 EUR- €17,95 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 16-channel Servo Motor Drive Shield For ArduinoWhen we are doing robot experiments, it needs to use multiple PWM ports to drive the servo motor, however, the commonly used Arduino UNO R3 only has 6 PWM ports, so it is not enough. This allows you to use this expansion board, which...
- €12,50 EUR
€12,50 EUR- €12,50 EUR
- Unit price
- per
Save €0,00 -
Touch Key USB Shield UNO R3 Dev Board - OpenHave you seen the Makey Touch keyboard simulation? MaKey MaKey is a very simple circuit board that can make any objects as a computing input device.That’s to say, it can make stairway into a piano, bananas into a keyboard, plasticine into a joystick or...
- €8,85 EUR
€8,85 EUR- €8,85 EUR
- Unit price
- per
Save €0,00 -
Nano IO shield for XBEE and NRF24L01 SocketNano ch340 is a small control board based on Arduino, very popular for everyone. But sometimes it is troublesome to connect a bunch of sensor modules and external power. So we particularly design this Nano IO shield.This simple NANO IO shield extends all the...
- €8,85 EUR
€8,85 EUR- €8,85 EUR
- Unit price
- per
Save €0,00 -
Proto Screw Shield Assemble Bindingpost Proto Shield - OpenELABWhen we use Arduino to do the work, we always feel bad wiring on the port. It makes us feel less reliable to either use a board harness or a sensor shield with dupont lines connection. Now we launch a binding post shield, which...
- €9,95 EUR
€9,95 EUR- €9,95 EUR
- Unit price
- per
Save €0,00 -
SIM800C Shield for Arduino UNO R3 Mega 2560 GPRS GSM - OpenELABThis is a GPRS / GSM Arduino expansion board developed by Keyes. It is a shield module with the frequency of EGSM 900MHz / DCS 1800MHz and GSM850 MHz / PCS 1900MHz, integrated with GPRS, DTMF, and other functions. It supports DTMF, when the...
- €18,00 EUR
€18,00 EUR- €18,00 EUR
- Unit price
- per
Save €0,00 -
TTP229L 16-key Touch Sensor for arduino Uno R3 - OpenELABThis is a 16-key digital capacitive touch switch sensor, using the working mode of a capacitive sensing trigger. Its communication is I2C communication, with simple and convenient wiring. Onboard TTP229 capacitive 16-key touch sensor IC Onboard power indicator Working voltage: 2.4V-5.5V Support to set...
- €6,50 EUR
€6,50 EUR- €6,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Balance Car ShieldThis key studio shield is particularly developed for balance cars based on Arduino development board. It mainly use the driver chip L298P produced by LGS Electronics, which is specially applied to large power motors. So the shield can drive two DC motors, and the...
- €15,50 EUR
€15,50 EUR- €15,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 1602LCD Keypad Shield For Arduino Raspberry PiOpenELAB LCD1602 expansion shield integrates a 1602 LCD display and six buttons into one piece, which is fully compatible with UNO R3 control board. It can work just through stacking expansion board on the key studio UNO R3 control board, which is very easy...
- €11,50 EUR
€11,50 EUR- €11,50 EUR
- Unit price
- per
Save €0,00 -
NANO CH340 IO Shield For Arduino - OpenELABThis is a simple and small NANO IO shield. It breaks out all the pins of Nano ch340, easy to hook it up to make experiments. Onboard comes with two 3mm fixed holes, convenient to fix the shield on other objects. Terminal block spacing:...
- €8,85 EUR
€8,85 EUR- €8,85 EUR
- Unit price
- per
Save €0,00 -
USB Host v1.5 Shield - OpenELABUSB Host v1.5 shield is an add-on board for Arduino USB Host. Directly plug it to the Arduino board and it will allow Arduino to have a USB Host function. Arduino with host function can communicate with USB devices, such as USB flash disks,...
- €8,50 EUR
€8,50 EUR- €8,50 EUR
- Unit price
- per
Save €0,00 -