MKS CANable

The MKS CANable V1.0 module is an upgraded version of the CANable, capable of communication at data rates up to 1Mbit/s in the fast phase of CAN, making it ideal for product debugging, CAN bus control, and high-speed CAN applications in the automotive industry.

The MKS CANable Pro V1.0 module is a further enhanced version of the MKS CANable V1.0, featuring high-speed transmission rates and exceptional operational stability. Additionally, it offers stronger anti-interference capabilities, making it highly suitable for industrial debugging or motor-related applications.

Product Features

• Both the MKS CANable V1.0 and MKS CANable Pro V1.0 modules use a high-performance ARM Cortex-M0 STM32F072C8T6 processor, running at a frequency of up to 48 MHz.

• The MKS CANable V1.0 communication chip uses the highly integrated TJA1051T/3, with a CAN data rate of up to 1 Mbit/s. The MKS CANable Pro V1.0 features the ADM3053BRWZ fully isolated chip, offering high common-mode transient immunity of over 25 kV/μs, which enhances anti-interference performance.

• The MKS CANable V1.0 supports up to 32 devices connected to a PC simultaneously. The MKS CANable Pro V1.0 can support 110 or more nodes on the bus, with inactive nodes not affecting the bus.

• The MKS CANable V1.0 is disconnected from the bus (zero load) when not powered. The MKS CANable Pro V1.0 provides 2.5kVrms signal and power isolation.

• It uses the LP5907MFX-3.3 low-noise LDO voltage regulator chip, with an output current of up to 250mA.

• Features thermal shutdown protection.

• Powered and communicates via USB interface.

• No drivers are required for Windows or Linux systems.

Parameters

• Mainboard Model:  MKS CANable

• Microprocessor:  STM32F072C8T6 microprocessor

• Communication Chip:  TJA1051T/3 chip

• Input Voltage: DC 3.3V-5V

• Output Current: 250mA

• Maximum Nodes: 32

• Transmission Rate: 1Mbps

• Operating Temperature:  -40°C to +150°C

• PCB Dimensions: 16mm x 40mm x 1.6mm