LILYGO - LCD OLED
-
LILYGO T-Dongle S3 ESP32-S3 Development Board
The T-Dongle S3 by LILYGO is a development board based on the ESP32-S3 microcontroller, designed for Internet of Things (IoT) applications. This board is available in two versions: one with a 0.96-inch ST7735 color LCD display and another without a display. Note: With TF Card, but...- From €17,68 EUR
€17,68 EUR- From €17,68 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-HMI
Details and Parameters of T-HMI Parameter Details MCU ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor Wireless Protocols 2.4GHz Wi-Fi and low-power Bluetooth (Bluetooth LE) Programming Platforms Arduino-ide, Micropython, PlatformIO-IDE Flash 16MB PSRAM 8MB Reed Switch Pin Position 1021 On-board Functions Boot button + Reset button...- €31,10 EUR
€31,10 EUR- €31,10 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-SIM7600E/G/SA-H
T-SIM7600G-H R2 / T-SIM7600E-H Introduce T-SIM7600 is a wireless networking module with WIFI/Bluetooth/4G LTE CAT4 GPS. T-SIM7600X-H is ten times faster than T-SIM7600X's Download link (DL) and Upload Link (UL); LTE (Mbps) is optimized from 10(DL)/5(UL) to 150(DL)/ 50(UL) On this basis, we integrate a...- From €88,40 EUR
- From €88,40 EUR
- Unit price
- per
-
LILYGO LoRa32 V2.1 ESP32 433/868/915MHZ 0.96 Inch OLED SD Card WIFI Module
The LILYGO Paxcounter Disaster-Radio LoRa V2.1_1.6.1 ESP32 is a versatile, high-performance module designed for a wide range of IoT applications, including passenger flow metering, disaster communication, and environmental monitoring. Powered by the ESP32 microcontroller, this module supports LoRa communication at frequencies of 433MHz, 868MHz,...- From €26,00 EUR
€26,00 EUR- From €26,00 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Beam Meshtastic ESP32 LoRa 923MHZ Wireless Module
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino. Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series Specifications...- €59,28 EUR
€59,28 EUR- €59,28 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Beam Meshtastic ESP32 LoRa 915MHZ Wireless Module
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino. Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series Specifications...- €57,20 EUR
€57,20 EUR- €57,20 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Beam Meshtastic ESP32 LoRa 868MHZ Wireless Module
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino. Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series Specifications...- €55,12 EUR
€55,12 EUR- €55,12 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Beam Meshtastic ESP32 LoRa 433MHZ Wireless Module
Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino. Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series Specifications...- €51,90 EUR
€51,90 EUR- €51,90 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-RGB ESP32-S3 2.1/2.8 inch Round Display Touch Screen Development Board
T-RGB is the first circular touch display screen of LilyGo. The screen uses a 2.1/2.8inch ST7701S TFT LCD full-color display. The main control chip adopts ESP32-S3R8 Tensilica Xtensa Dual-Core LX7 Microprocessor, this chip supports Wi-Fi 802.11 b/g/n and Bluetooth 5. For half circle and full circle...- From €47,84 EUR
€51,90 EUR- From €47,84 EUR
- Unit price
- per
Save €4,06 -
LILYGO T-Display S3 AMOLED, 1.91-inch Touch versions available
T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...- From €43,68 EUR
€43,68 EUR- From €43,68 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Display S3 AMOLED V1.0, 1.91-inch no-touch versions available
T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...- From €39,52 EUR
€39,52 EUR- From €39,52 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Display S3 AMOLED V2.0, 1.91-inch no-touch versions available
T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...- From €38,48 EUR
€38,48 EUR- From €38,48 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Display S3 AMOLED, 1.91 inch Touch Versions Available and Camera
T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...- From €10,30 EUR
€10,30 EUR- From €10,30 EUR
- Unit price
- per
Save €0,00 -
LILYGO T Display S3 1.9 inch Touch Screen Development Board
T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication...- From €20,70 EUR
€20,70 EUR- From €20,70 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-QT Pro ESP32-S3 GC9A01 0.85 inch LCD module
Specification MCU ESP32-S3FN4R2 Xtensa LX7 microprocessor Wireless Connectivity Wi-Fi 802.11 b/g/n, BL V5.0+BLE Programming Platform Arduino-ide, Micropython Flash 4M PSRAM 2M Clock frequency 240Mhz Onboard functions IO00+IO47 Battery Detection IO04 LCD: GC9107 TFT IPS LCD LCD Resolution: 128*128px Support 4-Wire SPI interface Display Area...- From €1,56 EUR
€1,56 EUR- From €1,56 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Deck Portable microcontroller programmer
T-Deck is a pocket-sized gadget with a 2.8-inch, 320 x 240 pixel IPS LCD display, a mini keyboard, and an ESP32 dual-core processor. While it's not exactly a smartphone, you can use your programming knowledge to turn it into a standalone messaging device, or...- From €67,60 EUR
€67,60 EUR- From €67,60 EUR
- Unit price
- per
Save €0,00 -
LILYGO T-Embed IoT Embedded Panel for Programmable Development
LILYGO T-Embed is an IoT-embedded panel designed for programmable development. ABS+PC material (optional translucent version) panel + circuit board integrated standardized design, providing product 3D drawings and reference design drawings. Easy design to embed on your product. Note [For orange button]: Since the edge of...- From €43,68 EUR
€49,92 EUR- From €43,68 EUR
- Unit price
- per
Save €6,24
