Hat
-
W5100 Ethernet Shield Board with SD Card - OpenELAB
W5100 Ethernet Shield gives you an easy way to get your Arduino Online. It can turn your Arduino into a simple web server or use the Internet to read /write its digital and analog outputs/inputs.Compatible with the UNO R3 board and Mega 2560 R3.It...- €26,00 EUR
€26,00 EUR- €26,00 EUR
- Unit price
- per
Save €0,00 -
Home Assistant Green
Home Assistant Green is the simplest and most privacy-centric solution for home automation. With a simple setup process, it allows you to manage all of your smart devices through a single system and ensures that all data is stored locally by default. This card...- €161,20 EUR
€161,20 EUR- €161,20 EUR
- Unit price
- per
Save €0,00 -
0.91 inch OLED I2C Display 128 x 32 pixels
The 0.91 inch OLED I2C display with 128x32 pixels is very compact and compatible with Arduino, Raspberry Pi and other microcontrollers. The high contrast of the display makes the display very easy to read. The pins are self-luminous and no backlight is needed, which...- From €6,23 EUR
€6,23 EUR- From €6,23 EUR
- Unit price
- per
Save €0,00 -
GPIO Breakout Kit for Raspberry Pi 4 4B 3 3B
Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit) This basic GPIO extension board kit includes an 830-hole breadboard, T-type breakout adapter, LEDs,...- €23,92 EUR
€23,92 EUR- €23,92 EUR
- Unit price
- per
Save €0,00 -
NEO-6M GPS Shield Expansion Board with Antenna for Raspberry Pi
It is based on the NEO-6 u blox 6 GPS module, compatible with Raspberry Pi 3. Plug it into Raspberry Pi 3. Upload correct codes to Raspberry Pi 3, and you can find your exact location within a few meters.It also provides you with...- €23,92 EUR
€23,92 EUR- €23,92 EUR
- Unit price
- per
Save €0,00 -
Raspberry Pi T type board+40P Colorful Ribbon Cable+400 Breadboard
This kit is designed for you to connect to external devices,including T-type shield, 40pin ribbon cable, 400-pinpoint breadboard, compatible with Raspberry Pi A+/B+/3 B.- €15,08 EUR
€15,08 EUR- €15,08 EUR
- Unit price
- per
Save €0,00 -
Raspberry Pi 16*8 LED Matrix Shield CE certification
We know that the I/O Pin of Raspberry Pi is limited. So Raspberry comes with LED dot matrix screen, it would be more trouble. But use special LED constant current control chip, basically only takes Raspberry Pi SPI interface (3 IO + 2 enabled)...- €13,00 EUR
€13,00 EUR- €13,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4 channel 5V Relay Shield module for Arduino UNO R3
The OpenELAB relay shield has integrated a 4-channel 5V relay module, which is fully compatible with the UNO R3 control board. The 4-channel relay on the shield is active at HIGH level. Separately connect the 4-channel relay to the digital port 4, 5, 6, 7...- €14,04 EUR
€14,04 EUR- €14,04 EUR
- Unit price
- per
Save €0,00 -
JoyStick Shield PS2 for Arduino - OpenELAB
Joystick Shield is particularly developed for you to design your own game machines.It adds an nRF24L01 RF interface and a Nokia 5110 LCD interface, easy for secondary game development. Because this RF module has stable performance, and supports 6 in 1 game play, which...- €15,60 EUR
€15,60 EUR- €15,60 EUR
- Unit price
- per
Save €0,00 -
Xbee Sensor Expansion Shield V5 - OpenELAB
Arduino is an open-source controller board, popular among electronic enthusiasts for making interactive projects. But for those who are not familiar with electronics, adding circuits to Arduino may be tricky. That’s why we developed this key studio Xbee sensor shield. It can help you...- €13,00 EUR
€13,00 EUR- €13,00 EUR
- Unit price
- per
Save €0,00 -
Mega Protoshield/Prototype Expansion Board V3 - OpenELAB
ProtoShield is particularly designed for the MEGA 2560. It makes it easy for you to design custom circuits and solder electronics directly on it.For convenient use, there is a large prototyping space of both connected and unconnected spaced through holes on the shield.There is...- €12,32 EUR
€12,32 EUR- €12,32 EUR
- Unit price
- per
Save €0,00 -
PN532 NFC/RFID Controller Shield for Arduino Uno R3 - OpenELAB
PN532 NFC/RFID Controller Shield based on a PN532 chip is used for field communication close to 13.56MHz. This shield is equipped with an antenna onboard, so there is no external antenna coil. It is compatible with SPI, IIC, and UART interfaces to communicate. When...- €16,12 EUR
€16,12 EUR- €16,12 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Bluetooth 4.0 Shield Expansion Shield Board
The key studio Bluetooth 4.0 shield is an integration of sensor shield and HM-10 Bluetooth-4.0, fully compatible with UNO R3. So it is very easy to stack it onto the UNO R3 board.The shield has extended all the digital and analog pins out into...- €18,20 EUR
€18,20 EUR- €18,20 EUR
- Unit price
- per
Save €0,00 -
MEGA Sensor Shield V1 for Arduino Mega - OpenELAB
Have you met with these troubles? when connecting a couple of sensor modules to the MEGA 2560 control board, sometimes power output interfaces are not enough, so need to use the breadboard and the wiring is rather troublesome.Now don’t worry about that. You can...- €13,51 EUR
€13,51 EUR- €13,51 EUR
- Unit price
- per
Save €0,00 -
Screw Shield V3 Terminal Expansion Board
We used to do the work, I always felt a bad connection on the port. Either use a breadboard plug wire, or use the sensor expansion board with DuPont cable, feel less reliable, and now we launch a terminal expansion board, the thread can...- €6,03 EUR
€6,03 EUR- €6,03 EUR
- Unit price
- per
Save €0,00 -
L298N Motor Shield Dual High Current Motor Drives
L298N Motor Shield DC motor drives using ST STMicroelectronics outstanding high-power motor driver chip dedicated L298N, direct drive DC motors, two-phase, four-phase stepper motor drive current up to 2A, motor output using eight-speed Schott group as a protective diode. The circuit line wiring reasonable...- €13,00 EUR
€13,00 EUR- €13,00 EUR
- Unit price
- per
Save €0,00 -
L298P Shield/2A High Current Dual Motor Drive Module - OpenELAB
You can use the UNO R3 microcontroller and add external components to complete a variety of amazing experiments, such as smart robot DIY. When DIY your robot, it is necessary to use the motor driver board to drive the DC motors, however, sometimes need...- €20,79 EUR
€20,79 EUR- €20,79 EUR
- Unit price
- per
Save €0,00 -
Sensor Shield/Expansion Board V5 - OpenELAB
In the experiments, you might often use a UNO R3 control board and several sensor modules. If the interfaces of power output is not enough, you may need to add a breadboard and use many connection wires. Is it really troublesome？But now, with this...- €10,19 EUR
€10,19 EUR- €10,19 EUR
- Unit price
- per
Save €0,00 -
Protoshield for Arduino with Mini Breadboard - OpenELAB
Proto Shield is particularly designed for the Arduino UNO R3. It makes it easy for you to design custom circuits and solder electronics directly on it. For convenient use, there is a large prototyping space of both connected and unconnected spaced through holes on...- €10,19 EUR
€10,19 EUR- €10,19 EUR
- Unit price
- per
Save €0,00 -
USB Host v1.5 Shield - OpenELAB
USB Host v1.5 shield is an add-on board for Arduino USB Host. Directly plug it to the Arduino board and it will allow Arduino to have a USB Host function. Arduino with host function can communicate with USB devices, such as USB flash disks,...- €17,16 EUR
€17,16 EUR- €17,16 EUR
- Unit price
- per
Save €0,00 -
NANO CH340 IO Shield For Arduino - OpenELAB
This is a simple and small NANO IO shield. It breaks out all the pins of Nano ch340, easy to hook it up to make experiments. Onboard comes with two 3mm fixed holes, convenient to fix the shield on other objects. Terminal block spacing:...- €15,60 EUR
€15,60 EUR- €15,60 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 1602LCD Keypad Shield For Arduino Raspberry Pi
OpenELAB LCD1602 expansion shield integrates a 1602 LCD display and six buttons into one piece, which is fully compatible with UNO R3 control board. It can work just through stacking expansion board on the key studio UNO R3 control board, which is very easy...- €17,68 EUR
€17,68 EUR- €17,68 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Balance Car Shield
This key studio shield is particularly developed for balance cars based on Arduino development board. It mainly use the driver chip L298P produced by LGS Electronics, which is specially applied to large power motors. So the shield can drive two DC motors, and the...- €19,60 EUR
€19,60 EUR- €19,60 EUR
- Unit price
- per
Save €0,00 -
NANO Shield Board W/ Power Switch for Arduino Nano - OpenELAB
Nano ch340 is a tiny control board based on Arduino platform, which is deeply popular. However, if want to connect several sensor modules to Nano ch340, and connect external power, we need to use breadboard and a bunch of jumper wires, which is pretty...- €15,60 EUR
€15,60 EUR- €15,60 EUR
- Unit price
- per
Save €0,00 -
quick Connectors Motor Drive Shield for Arduino Robot Car - OpenELAB
There are many ways to drive the motor. Our robot uses the most commonly used L298P solution. L298P is an excellent high-power motor driver IC produced by STMicroelectronics. It can directly drive DC motors, two-phase and four-phase stepping motors. The driving current up to 2A, and output terminal of...- €17,67 EUR
€17,67 EUR- €17,67 EUR
- Unit price
- per
Save €0,00 -
NANO Shield with DC port for arduino Nano3.0 - OpenELAB
We particularly design this shield to make up the problem of connecting the sensor shield to the key studio NANO control board. This NANO shield has extended the digital and analog ports out as 3PIN interface (G-GND V-5V S-digital port/analog port) It also breaks...- €15,60 EUR
€15,60 EUR- €15,60 EUR
- Unit price
- per
Save €0,00 -
Solar Charger Shield for Arduino Solar Panel Solar Cell - OpenELAB
Solar charger shield boasts the features of collecting energy, power management, and charging, as a stacked shield and compatible with the UNO R3 control board. On this shield, BAT interface could output 5V when connected 3.0V-4.2V rechargeable batteries. At the same time, the USB...- €13,00 EUR
€13,00 EUR- €13,00 EUR
- Unit price
- per
Save €0,00 -
Expansion Board+TF Card for Data Recording - OpenELAB
When we conduct DIY experiments, we tend to connect some sensors with Arduino microcontrollers to detect all kinds of data. And we will need to save these data and record the saving time for follow-up studies. Therefore, we have designed this expansion board to...- €11,39 EUR
€11,39 EUR- €11,39 EUR
- Unit price
- per
Save €0,00 -
OpenELAB DMX (RDM)Shield Control Speakers Light Smoke Machine
This DMX(RDM) shield is designed for Arduino. Its working voltage is 5V and has 0.5W power consumption.It can transmit and receive DMX through Arduino so as to control speakers, light and smoke machines. If you get tired of the programming language, you also can...- €23,92 EUR
€23,92 EUR- €23,92 EUR
- Unit price
- per
Save €0,00 -
TB6612FNG Motor/Servo Drive Shield with PS2 Socket - OpenELAB
Motor/servo driver expansion board is used with plus development board and UNO R3 development board. It extends the pin ports in the form of a servo wire sequence. What’s more, the board sets a serial communication interface, a PS2 interface as well as a...- €16,12 EUR
€16,12 EUR- €16,12 EUR
- Unit price
- per
Save €0,00 -
Multi-purpose Shield V1 for Arduino Starter - OpenELAB
Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connection. Download the program to complete the experiment.It is multi-purpose and we offer code libraries of all modules that have been tested. You can use them directly.There are extension...- €15,08 EUR
€15,08 EUR- €15,08 EUR
- Unit price
- per
Save €0,00 -
Multi-purpose shield V2 W/Gift Box - OpenELAB
Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connection. Download the program to complete experiment.It is multi-purpose and we offer code libraries of all modules that have been tested. You can use them directly. There are extension...- €15,60 EUR
€15,60 EUR- €15,60 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 8833 Motor Driver Expansion Board PH2.0 USB Cable DC 6-9V
The 8833 motor driver expansion board uses PH2.0 terminals and an 8833 motor driver chip driven by the two-channel H bridge whose largest current can be up to be 1.5A. It also integrates an IR receiver, ultrasonic sensor ports, analog ports, line tracking interfaces,...- €13,00 EUR
€13,00 EUR- €13,00 EUR
- Unit price
- per
Save €0,00 -
Seeed Studio Grove for Scratch
Grove for Scratch is an expansion board that allows various Grove modules to be controlled from Scratch via a USB cable. Feature No need to install the app： No need to install the Scratch Link app, AkaDako is built in the WebSerial function, so...- €81,12 EUR
€81,12 EUR- €81,12 EUR
- Unit price
- per
Save €0,00 -
Seeed Studio Expansion Board Base for XIAO
Seeed Studio XIAO Expansion Board is a powerful functional expansion board for the Seeed Studio XIAO series of only half Raspberry Pi 4 size. It enables building prototypes and projects in an easy and quick way. With its rich peripherals, you could explore the infinite...- €26,52 EUR
€26,52 EUR- €26,52 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Raspberry Pi 5 Breakout Board
This pin expansion module for the Raspberry Pi 5 is specifically designed to enhance wiring efficiency. Visualizing the GPIO pins of the Raspberry Pi 5, it allows users to avoid frequently checking the pin diagram, significantly improving ease of use and efficiency. Product...- €4,16 EUR
€4,16 EUR- €4,16 EUR
- Unit price
- per
Save €0,00 -
Waveshare RM500U-CNV Raspberry PI 5G/4G/3G Hat
RM500x / RM502x 5G HAT For Raspberry Pi, Quad Antennas LTE-A, Multi Band, 5G/4G/3G Compatible Raspberry Pi RM500x / RM502x 5G HAT Supports 5G/4G/3G * for reference only, Raspberry Pi board is NOT included Features At A Glance Integrates extensive network protocols, with...- €144,56 EUR
€144,56 EUR- €144,56 EUR
- Unit price
- per
Save €0,00 -
Waveshare ESP8266 for Raspberry Pi Pico Wifi Module TCP UDP
Waveshare ESP8266 For Raspberry Pi Pico Wifi Module Uart Support TCP UDP Onboard Antenna Expanding Board Support Dropshipping and Wholesaling. Onboard for Raspberry Pi Pico interface, suitable for Raspberry Pi Pico series motherboardsUART interface communication, universal serial port AT command control, can quickly get...- €10,30 EUR
€10,30 EUR- €10,30 EUR
- Unit price
- per
Save €0,00 -
Waveshare MAX-M8Q GNSS HAT for Raspberry Pi
MAX-M8Q GNSS HAT For Raspberry Pi, Multi-Constellation Receiver Support MAX-M8Q GNSS HAT GNSS Module Based On MAX-M8Q For Raspberry Pi Accurate & Fast Positioning With Minor Drifting, Low Power Consumption, Outstanding Ability For Anti-Spoofing & Anti-Jamming This is a Raspberry Pi GNSS HAT based on MAX-M8Q with multi-constellation...- €38,48 EUR
€38,48 EUR- €38,48 EUR
- Unit price
- per
Save €0,00 -
Waveshare SX1262 LoRa HAT for Raspberry UART
This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band. It allows data transmission up to 5km through serial port. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as...- €29,64 EUR
€29,64 EUR- €29,64 EUR
- Unit price
- per
Save €0,00 -
Waveshare SX1268 LoRa HAT for Raspberry UART
SX1268 LoRa HAT for Raspberry Pi, Spread Spectrum Modulation, 433MHz Frequency Band Overview This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port. By utilizing the new generation LoRa spread...- From €25,82 EUR
€25,82 EUR- From €25,82 EUR
- Unit price
- per
Save €0,00 -
Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. SIM7070G NB-IoT / Cat-M / GPRS HAT For Raspberry Pi, Global Band Support, With GNSS...- €39,52 EUR
€39,52 EUR- €39,52 EUR
- Unit price
- per
Save €0,00 -
Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi 4G/3G/2G GNSS
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, and Syrian. SIM7600G-H M.2 4G HAT For Raspberry Pi, LTE CAT4 High Speed, Global Coverage Multi-Band,...- €93,11 EUR
€93,11 EUR- €93,11 EUR
- Unit price
- per
Save €0,00 -
Waveshare SIM7600CE-CNSE 4G HAT for Raspberry Pi 4G 3G 2G GNSS
Waveshare SIM7600CE-CNSE 4G HAT for Raspberry Pi 4G 3G 2G GNSS Positioning for China Features At A Glance Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports dial-up, telephone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports...- €72,70 EUR
€72,70 EUR- €72,70 EUR
- Unit price
- per
Save €0,00 -
M5Stack M5StickC ToF HAT
Note: All products are tax-inclusive. ToF HAT is a high-precision laser ranging sensor specifically designed for the M5StickC. It integrates the ST VL53L0X laser ranging chip and a 940nm VCSEL transmitter. By measuring the round-trip time of the laser signal to the target object, it...- €11,34 EUR
€11,34 EUR- €11,34 EUR
- Unit price
- per
Save €0,00 -
0.96 inch OLED SSD1306 Display I2C 128 x 64 pixels
MONOCHROMES 0.96 "OLED DISPLAY WITH 128 X 64 PIXELS (WHITE) The AZDelivery 0.96" OLED Display is very small with a screen diagonal of 3 cm and is easy to read due to its high contrast. The Display consists of 128x64 OLED pixels, which are...- From €7,58 EUR
€7,58 EUR- From €7,58 EUR
- Unit price
- per
Save €0,00
