Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi 4G/3G/2G GNSS
📦 Location of the warehouse: China
Free shipping for you
Free Shipping from 30€ in Germany, 50€ in the EU!
Trustpilot rating: 4.4/5.0
Thank you for your support - rate us on Trustpilot!
Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi 4G/3G/2G GNSS
4G/3G/2G communication and GNSS positioning, global band
This is a 4G/3G/2G Raspberry Pi communication HAT with GNSS positioning and high-speed LTE CAT4 global band connection. Connecting it to PC, Raspberry Pi or Jetson Nano host board makes it easy to enable 4G high speed networking, cloud platform communication, phone call/SMS, and global GNSS positioning functions.
-
Supports dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on
-
GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
-
USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication
-
Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
-
Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
-
Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
-
Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allow changing the SMA antenna position
-
Onboard audio jack and audio decoder, allows audio operation like making phone call
-
High efficiency power supply circuit, up to 3A output current
|
FREQUENCY BAND |
|
|
LTE Cat-4 |
LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 |
|
3G |
UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19 |
|
2G |
GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz |
|
GNSS |
|
|
Satellite systems |
GPS, Beidou, GLONASS, GALILEO, QZSS |
|
Receiver type |
16-channel |
|
C/A Code |
|
|
Sensitivity |
-159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) |
|
Cold starts: -148 dBm |
|
|
Time-To-First-Fix (open air) |
Cold starts: <35s |
|
Hot starts: <1s |
|
|
SMS AND AUDIO |
|
|
SMS |
Supported types: MT, MO, CB, Text, PDU |
|
Storage: USIM card and ME (default) |
|
|
Audio feature |
Supports echo cancellation |
|
Supports noise reduction |
|
LTE Cat-4: Up To 150Mbps (Downlink) / 50Mbps (Uplink)
3G (HSPA+): Up To 42Mbps (Downlink) / 5.76Mbps (Uplink)
2G (GPRS/EDGE): Up To 236.8Kbps (Downlink) / 236.8Kbps (Uplink)
Supports Windows 7/8/10/11, Ubuntu, Raspberry Pi OS, OpenWRT...
Just plug it into USB port, go through some simple configuration, and the high-speed 4G network connection will be ready to use
Supported Communication Protocols: TCP, UDP, FTP, FTPS, HTTP, HTTPS...
Compatible With SIM7600X-M.2, SIM7906X-M.2, A7906X-M.2 Series Modules
- M.2 TO 4G/5G HAT x1
- SIM7600G-H-M.2 x1
- Antenna 2pcs x1
- IPEX adapter cable 2pcs x1
- 2*20PIN pin header x1
- Passive GPS antenna x1
- Dual plug USB3.0 cable x1
- USB3.0 adapter x1
- USB2.0 adapter x1
- SMA protective cap 2pcs x1
- Screws pack x1
Effective Date: March 27, 2025
At OpenELAB, we are committed to providing accurate product descriptions and delivering high-quality products. If you experience any issues with your purchase, please notify us within 60 days of the shipment date.
1. Warranty Disclaimer
Unless explicitly stated in a specific agreement or purchase order, OpenELAB makes no warranties—express or implied—regarding the fitness, suitability, or merchantability of any product for a particular purpose or special use.
2. Warranty Policy
Warranty Period
The standard warranty period for products sold by OpenELAB is 12 months from the date of delivery.
Under this warranty, OpenELAB will make a reasonable effort to repair or replace products free of charge if defects are due to issues with raw materials, design, or manufacturing.
If the defect qualifies under this policy but falls outside the covered scope, reasonable charges may apply for repair or replacement.
After the warranty period, support may still be available at a reasonable fee.
Warranty Exclusions
The warranty does not apply in the following cases:
- The product is beyond the 12-month warranty period.
- Damage due to misuse, improper maintenance or storage, or failure to follow the user guide or manual.
- Issues caused by Force Majeure events (e.g., natural disasters, war, legal changes, etc.).
- Unauthorized repair attempts by the customer.
- The product is not defective but has been opened and is non-returnable by policy.
3. Returns & Refunds
If you're not satisfied with your purchase, you may be eligible for a return or exchange:
- Return for Refund: Within 15 days of receipt (unopened).
- Return for Replacement: Within 30 days of receipt (damaged or defective).
- Exchange Window: Up to 30 days from receipt.
Please email us at info@openelab.io for a return authorization before sending anything back.
Return Conditions
- Items must be in original, clean, and mint condition with packaging intact.
- Returns of damaged, used, scratched, modified, or programmed items will not be accepted.
- Include the receipt, a brief note with your name, order number, and reason for return.
Shipping & Fees
- Customers are responsible for return shipping to our warehouses in Europe, the US, or China.
- Refunds may be subject to additional shipping fees unless the return is due to our error.
- A flat €8 shipping fee will be deducted for returned items that originally qualified for free shipping.
Payment Platform Fees
For refunds processed through third-party platforms such as PayPal or Braintree, a standard 3.5% service fee may be deducted to cover payment processing costs.
