AVADA - Best Sellers

The ESP8685-WROOM-01 is a general-purpose Wi-Fi and low-power Bluetooth (Bluetooth LE) module with powerful features and a rich set of peripheral interfaces for smart home, industrial automation, healthcare, consumer electronics, and other applications. The ESP8685-WROOM-01 features a PCB board-mounted antenna, which can be surface-mounted...

The ESP8685-WROOM-05 is a general-purpose Wi-Fi and low-power Bluetooth (Bluetooth LE) module with powerful features for smart home, industrial automation, healthcare, consumer electronics and more. The ESP8685-WROOM-05 features a PCB board-mounted antenna, which can be used either surface mounted or through a pin connection....

The ESP8685-WROOM-07 is a general-purpose Wi-Fi and low-power Bluetooth (Bluetooth LE) module with powerful features for smart home, industrial automation, healthcare, consumer electronics, and more. The ESP8685-WROOM-07 can be vertically inserted onto a PCB board using wave soldering, and has 3 available GPIOs.The ESP8685-WROOM-07...

The ESP-WROOM-02 SMD module is available in a form factor of (18.00 ± 0.20) mm x (20.00 ± 0.20) mm x (2.80 ± 0.15) mm and is currently configured as a SPI Flash in a SOP 8 (150 mil) package with a 2 dBi...

Note: All products are tax-inclusive. MIDI Unit is a channel control and audio synthesis unit based on the MIDI interface. The switch on the front of the product allows you to set the left/right MIDI port's bypass mode. In Bypass mode, the left and right...

Note: All products are tax-inclusive. STAMP-PICO features an ultra-compact design with two low-power Xtensa® 32-bit LX6 microprocessors at 240MHz on a PCB as tiny and delicate as a postage stamp. low power consumption. It is ideal for any space-constrained or battery-powered devices such as wearables, medical devices, sensors, and...

Note: All products are tax-inclusive. STAMP-PICO features an ultra-compact design with two low-power Xtensa® 32-bit LX6 microprocessors at 240MHz on a PCB as tiny and delicate as a postage stamp. low power consumption. It is ideal for any space-constrained or battery-powered devices such as wearables, medical devices, sensors, and...

Note: All products are tax-inclusive. M5Stack just added a new family to its popular series of modules with the Stamp-C3. the new Stamp-C3 featuring ESPRESSIF ESP32-C3 RISC-V MCU with Wi-Fi connectivity for IoT edge devices such as home appliances and Industrial Automation. By combining RSA-3072-based secure boot and...

Note: All products are tax-inclusive. TOUGH, the Waterproof ESP32 embedded controller, is an industrial-grade programmable embedded controller designed for demanding applications. Powered by the Espressif ESP32 chipset with integrated Wi-Fi, the esp32 kits feature a dual-core low-power Xtensa® 32-bit LX6 microprocessor with a clock frequency of up to...

Note: All products are tax-inclusive. AirQ is an integrated, low-power air quality monitoring device designed to provide comprehensive air quality monitoring solutions. It features multiple components, including the SEN55 air quality sensor and the SCD40 CO2 sensor, enabling the monitoring of PM1.0, PM2.5, PM4, PM10...

Note: All products are tax-inclusive. M5Stack FIRE V2.7 adopts the Espressif ESP32 main control chip, equipped with two low-power Xtensa® 32-bit LX6 microprocessors, with a high frequency of 240MHz. It features an onboard 8M PSRAM + 16M FLASH memory combination and integrates a range...

Note: All products are tax-inclusive. CoreMP135 is an integrated Linux industrial control host based on the STM32MP135DAE7 chip. It features a single-core Arm Cortex-A7 processor with a frequency of up to 1GHz and is equipped with 4Gb DDR3L SDRAM for running memory. The device boasts a rich array of...

Note: All products are tax-inclusive. ADC V1.1 Unit is an A/D conversion module that utilizes the ADS1110 chip, a 16-bit self-calibrating analog-to-digital converter. It is designed with an I2C interface, offering convenient connectivity. The module offers conversion speeds of 8, 16, 32, and 128 samples...

Note: All product are tax-inclusive. Mini Scales Unit is an integrated mini weighing unit that combines a 5kg weighing sensor, an ADC acquisition chip (HX711), and a protocol conversion MCU to directly output weighing results. The product is equipped with an STM32F030F4P6 microcontroller, uses the...

Note: All products are tax-inclusive. Feature Size: 1.14 inches Material: High-definition IPS LCD Resolution: 135(H) x RGB x 240(V) Driver IC: ST7789V Communication Interface: 4 Line SPI Display Color: Full Color Display Area: 14.864(H) x 24.912(V) mm Overall Dimensions: 17.6(H) x 31.0(V) x 1.6(D)...

Note: All products are tax-inclusive. Reflective IR Unit is an infrared sensing unit that can efficiently and accurately detect the reflected infrared light from target objects. It is suitable for applications such as object detection, tracking, distance measurement, and automation systems. It generates a corresponding...

Note: All products are tax-inclusive. ESP32-Downloader is a USB-to-UART converter. It can be used to download firmware form PC to Microprocessor devices. TXD led, RXD led, Power led and 6pin @ 2.54mm bus sockets. This product is EOL now. Product Features USB-TTL USB TypeC interface...

Note: All products are tax-inclusive. ESP32 Downloader Kit is a USB-TTL adapter board for ESP32/ESP8266, This item contains CP2104/CH9102 chip. It supports one-touch download without a chip and a pin-down resetting manual . The Plug-in board and row of pins parts from the set can be...

Note: All products are tax-inclusive. IMU Pro Mini Unit is a versatile and integrated inertial motion unit. It incorporates advanced six-axis attitude sensors (BMI270), a three-axis geomagnetic sensor (BMM150), and an atmospheric pressure sensor (BMP280) to provide comprehensive measurement and detection capabilities for users. Whether...

Note: All products are tax-inclusive. Introducing the AC Measure Unit, a high-performance single-phase AC measurement module with advanced isolation capabilities. This module utilizes the powerful STM32+HLW8032 scheme to provide real-time monitoring of high-precision current, voltage, power, and other crucial data.Equipped with a built-in AC isolation chip, the...

Note: All products are tax-inclusive. AIN4-20mA Unit is a highly capable single-channel 4~20mA current analog measurement unit. Powered by the STM32G030F6 main control chip, it communicates seamlessly with the M5 host through i2c, ensuring efficient and reliable data transmission. This unit offers flexibility in...

Note: All products are tax-inclusive. Hbridge Unit is a highly efficient DC motor drive module designed to provide reliable motor control functionality. It incorporates the "STM32F030+RZ7899" scheme, enabling precise control of DC motors. The module communicates with the M5 host via I2C, allowing for PWM...

Note: All products are tax-inclusive. KMeterISO unit is an all-in-one solution for temperature measurement that integrates the functions of acquisition, isolation, and communication. It incorporates a K-type thermocouple sensor and utilizes the STM32F030+MAX31855KASA+T 14-bit thermocouple digital conversion chip scheme, ensuring high-precision temperature acquisition and conversion. ...

Note: All products are tax-inclusive. CO2L unit is a digital air CO2 concentration detection unit designed for accurate measurement of CO2 levels in ambient air. It features a single-measurement low-power mode, making it energy-efficient. The unit incorporates Sensirion's SCD41 sensor, known for its reliability...

Note: All products are tax-inclusive. Scales unit is a highly accurate and affordable I2C port weighing sensor designed for precise measurements. It boasts a wide weighing range of 20kgs, making it suitable for various applications. The unit incorporates an STM32F030 controller, an HX711 sampling chip, and a 20 kgs weighing sensor, ensuring...

Note: All products are tax-inclusive. CO2 unit is a highly efficient and accurate photoacoustic Carbon Dioxide (CO2) sensor designed to measure the composition of CO2 in ambient air. Equipped with a built-in Sensirion SCD40 CO2 sensor, the unit utilizes Buck converter circuitry for power management and supports...

Note: All products are tax-inclusive. ID Unit is a crypto coprocessor that incorporates the ATECC608B hardware cryptographic chip. It is designed to provide secure key storage and cryptographic functionalities for various applications. ID Unit utilizes the I2C communication interface for data exchange and control.The ATECC608B...

Note: All products are tax-inclusive. Microphone Unit is a sound sensor with a built-in omnidirectional electret microphone. The microphone signal is amplified and output by the MAX4466 microphone preamplifier. This preamplifier effectively suppresses power supply noise and common mode noise, resulting in high-fidelity output signals...

Note: All products are tax-inclusive. Ameter Unit is a current meter that can monitor the current in real time. The 16-bit ADS1115 ADC (analog-to-digital) converter can be used to communicate through I2C protocol (By default the I2C address is 0X48 unless manually modified). In order...

Note: All products are tax-inclusive. 6-Axis IMU Unit is a sensor designed to measure the orientation and acceleration of an object in six degrees of freedom. It integrates a 3-axis accelerometer and a 3-axis gyroscope, allowing real-time calculation of tilt angles and acceleration. The unit...

Note: All products are tax-inclusive. PDM mini Unit is a digital MEMS silicon-based microphone that utilizes Pulse-Density Modulation (PDM) signaling. This microphone is known for its high signal-to-noise ratio, high sensitivity, low power consumption, resistance to RF interference, and smooth frequency response. It automatically...

Note: All products are tax-inclusive. TVOC/eCO2 mini Unit is a digital multi-pixel gas sensor unit with integrated SGP30. It mainly measures various VOC (volatile organic compounds) and H2 in the air. It can be programmed to detect TVOC (total volatile organic compounds) and eCO2 (equivalent...

Note: All products are tax-inclusive. Hall effect Unit integrated with three A3144E Hall sensor switches which are processed by 74HC series gate integrated circuits. Low-level signal can be generated when the magnet S pole is close to the top of the sensor or the N...

Note: All products are tax-inclusive. OP.180 is a unit of a 180° non-contact optical limit switch. It consists of infrared emitters and receivers on both sides. During normal operation, the emitter continuously emits infrared signals to the receiver. When an object passes through the...

Note: All products are tax-inclusive. OP.90 is a non-contact optical limit switch with a 90° detection angle. It consists of infrared emitters and receivers on both sides. During normal operation, the emitter continuously emits infrared signals to the receiver. When an object passes through the...

Note: All products are tax-inclusive. ACCEL is a motion sensor Unit. Integrated with ADXL 345 and ACC it is able to obtain 3-axis of Acceleration. ADXL 345 is a small, thin, ultra-low power consumption 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16...

Note: All products are tax-inclusive. LIGHT Unit is a light intensity detection sensor that integrates a photoresistor and a 10K adjustable resistor. It is capable of detecting light intensity and setting a threshold value for light intensity. The resistance of the photoresistor decreases as the...

Note: All product are tax-inclusive. WEIGHT is a versatile unit designed for precise weight measurement. It features the integration of the HX711, a 24-bit A/D converter chip specifically tailored for high-accuracy electronic scales. The unit provides selectable input channels, allowing you to seamlessly switch between...

Note: All products are tax-inclusive. NCIR is a single-point infrared temperature sensor. It incorporates the MLX90614 infrared sensor, capable of measuring the surface temperature of human bodies or other objects.Unlike most contact-based sensors, this sensor detects temperature by measuring the infrared radiation emitted by distant objects. It...

Note: All products are tax-inclusive. THERMAL is a thermal image Unit contains a thermopile sensor named MLX90640. It can be used to measure the surface temperature of an object and form a thermographic image by a temperature gradient composed of different surface temperatures. The image resolution...

Note: All products are tax-inclusive. HEART is built using the MAX30100 chipset. MAX30100 is a complete pulse oximetry and heart-rate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides very small total solution size without sacrificing optical or electrical performance. Minimal external...

Note: All products are tax-inclusive. The MiniOLED UNIT is a compact and versatile OLED screen unit that's perfect for use in a wide range of applications. With its 0.42-inch size and 72x40 resolution, this monochrome white display is ideal for embedding in various home products, smart wearable devices, portable devices, and industrial...

Note: All products are tax-inclusive. Glass Unit is a transparent OLED expansion screen unit with a size of 1.51 inches. It is designed to provide a monochrome display with a resolution of 128x64 pixels. The transparent area of the screen measures 128x56 pixels, allowing...

Note: All products are tax-inclusive. LCD Unit is a 1.14-inch color LCD expansion screen unit designed for displaying simple content as a display panel. It features a resolution of 135x240 pixels and utilizes the ST7789V2 drive scheme. The LCD Unit supports RGB666 display, allowing for...

Note: All products are tax-inclusive. QRCode Unit is an integrated one-dimensional/two-dimensional code scanning unit that combines a CMOS QR code capture engine with a resolution of 640x480 and a bus conversion MCU (STM32F030). It features a device-side toggle switch that allows for switching between I2C...

Note: All products are tax-inclusive. The Neco Unit is a unique RGB light board unit that features an adorable cat ear shape. It is designed with precision and comprises 35 WS2812C-2020 RGB lamp beads, providing vibrant and customizable lighting effects.With two 4-pin grove ports,...

Note: All products are tax-inclusive. FAN Unit is a unit that features a DC motor and is built using an N20 DC motor. It has an output shaft speed of 8800 RPM (no-load). With its unidirectional rotation characteristic, it can be used as a power...

Note: All products are tax-inclusive. Vibrator-Motor is a unit that features a vibration motor built with an N20 motor and a metal eccentric wheel. It supports a power supply voltage of 5V and has an output shaft speed of 8800 RPM (no-load). Vibration motors are...

Note: All products are tax-inclusive. RGB LED is an extendable strip light with built-in (SK6812) RGB LED. Just in case you haven’t heard about RGB LED yet, RGB LED features digitally addressable LEDs, which means each led can display RGB color and brightness individually. It...

Introducing our revolutionary RGB LED strip controller, designed to seamlessly integrate with the dynamic lighting capabilities of Windows 11. This controller is a plug-and-play device, requiring no additional drivers or software installations. Experience the ultimate convenience as you effortlessly control your RGB LED light...