AVADA - Best Sellers

Note: All products are tax-inclusive. StampS3 GroveBreakOut is a specialized expansion board designed for the M5StampS3, equipped with six Grove interfaces and compatible with M5's portA/B/C standards, including I2C, IO (input/output), and UART interfaces. This board features an integrated holder for 16340/18350 lithium batteries, along...

Note: All products are tax-inclusive. DAC2 Unit is an I2C digital-to-analog signal conversion unit. It utilizes the GP8413 solution, which provides high precision and accuracy in its performance. This chip can linearly convert a 15-bit digital value into two independent analog voltages of 0-5V or...

Note: All products are tax-inclusive. Introducing the StampS3Breakout board, the perfect expansion board designed exclusively for the M5StampS3. This versatile board simplifies connectivity by converting the M5StampS3's 1.27mm pitch pin to a standard 2.54mm pitch, making it effortless to connect with other devices.Equipped with a...

Note: All products are tax-inclusive. ACSSR unit is a versatile DC to AC single-phase solid-state relay controller kit that includes a single-phase solid-state relay and an ESP32C3 controller board. It supports key control, I2C slave, and Modbus networking modes of operation, providing flexibility for different control systems...

Introducing our revolutionary RGB LED strip controller, designed to seamlessly integrate with the dynamic lighting capabilities of Windows 11. This controller is a plug-and-play device, requiring no additional drivers or software installations. Experience the ultimate convenience as you effortlessly control your RGB LED light...

Ardu2040M | An Arduino style RP2040 RGB Matrix board Introducing our new product - the Arduino-like Development Board with RP2040 MCU and WS2812 Matrix.   This board is compact and versatile, featuring RP2040 MCU with GPIO expansion, a 5x5 WS2812 matrix for visual projects,...

ArduPico | An Arduino Style Carrier Board for the Raspberry Pi Pico board. Notice: ArduPico packages: Raspberry Pico Board, Sumolink Erhu RP2040 not include ArduPico + Sumolink Erhu RP2040, ArduPico + Raspberry Pico Board packages, not soldering Introducing our latest innovation, a circuit board designed...

Introducing the ASM2464 USB4 M.2 expansion board. This expansion board is based on ASMedia's ASM2464PD design and is mainly used to convert USB4 or Thunderbolt 3/4 to standard PCIe/NVMe. ASM2464PD, is a new generation of USB4 ®/Thunderbolt to PCIe/NVMe Accessory controller based on ASMedia...

Features 5G High-Speed Transmission: Offering speeds up to 5 times faster than traditional gigabit rates, ensuring swift file transfers, seamless HD video streaming, and lag-free online gaming. PCIe to 5G RJ45: It accommodates various PCI Express slot configurations, such as x1, x4, x8, and...

PI-232 | RS232 HAT for Raspberry Pi Are you looking for an easy way to add RS232 serial communication to your Raspberry Pi? Look no further than the Serial HAT RS232! This high-quality HAT is designed to provide reliable serial communication for your Raspberry...

PI-485 | RS485 HAT for Raspberry Pi Experience powerful, reliable communication with our RS485 HAT for Raspberry Pi. Designed for industrial applications, our RS485 HAT allows you to connect and communicate with multiple devices at once. Features RS485 mode (half-duplex) Galvanic isolation between Raspberry...

Support Raspberry Pi 5! Introducing our new HiFi DAC product, specifically designed for use with Raspberry Pi. With an external power interface and active power noise reduction, this product is a step above the competition. Our HiFi DAC delivers exceptional sound quality, allowing you...

Introducing our RP2040-based development board, a compact yet powerful alternative to the popular Pico. This board packs all the GPIO capabilities of the RP2040, along with expanded flash memory and an additional WS2812 RGB LED.Size matters, and our development board takes it to the...

Sumolink Erhu RP2040, a microcontroller board built on silicon designed by Raspberry Pi supporting a C/C++ SDK or the official MicroPython port. In order to minimize costs, we did not spend too much effort on creating related documentation or change board size like other...

WisdPi CAT6A Ultra-thin cables are designed for high density applications in Data Centres, MDF s and patch racks. Supporting up to 10 Gigabit Ethernet and meeting CAT6A TIA/EIA and IEEE 802.3an these cables can be used in high speed, critical applications while reducing the...

Note: All products are tax-inclusive. SSR (Solid State Relay) Unit relays are a type of relay that differ from traditional electromagnetic relays in several ways. One significant difference is their extended switching life, which is much longer compared to electromagnetic relays. This longevity is achieved...

Note: All products are tax-inclusive. 4-Relay  Unit is a unit that integrates four relays and is controlled via the I2C interface. Each relay is capable of controlling voltages up to AC-250V/DC-28V, with a rated current of 10A and the ability to withstand an instantaneous current of...

Note: All products are tax-inclusive. MINI-PROTO unit is a mini universal prototyping board unit. It allows you to freely design circuits on the board and connect it to the M5Stack controllers through the HY2.0-4P port. If you plan to add simple circuits to your design and...

Note: All product are tax-inclusive. BUTTON unit is a single button unit, and its status can be detected by monitoring the electrical level on the input pin. When the button is pressed, the electrical level on the pin will be high, and when the button...

Note: All products are tax-inclusive. 3.96port is an HY2.0-4P to HT3.96 interface converter. The converter features four pins, and HT3.96 is a commonly used specification for pluggable terminal connectors.With the HT3.96 interface converter, you can adapt the HY2.0-4P cable to a pluggable terminal connector, allowing...

Note: All products are tax-inclusive. PROTO Unit is an incredibly versatile development board that empowers you with the freedom to design and implement circuits according to your specific needs. With its HY2.0-4P port, you can seamlessly connect the PROTO Unit to the main M5Stack device,...

Note: All products are tax-inclusive. CatM+GNSS unit is a global version of a wireless communication module that supports both CAT-M (Category M) and NB-IoT (Narrowband Internet of Things) dual-mode connectivity. The module, powered by the SIM7080G internal module, is designed to operate on CAT-M and...

Note: All products are tax-inclusive. CatM Unit is an international version of a dual-mode wireless communication module. It is based on the 'SIM7080G' module, which supports both 'CAT-M' (Category M) and 'NB-IoT' (Narrowband Internet of Things) communication technologies. This module provides reliable communication for IoT...

Note: All products are tax-inclusive. RF433R Unit is an RF wireless radio frequency receiver designed for various applications requiring wireless control. It utilizes the SYN531R radio frequency receiver IC and operates at a frequency of 433.92MHz using Amplitude Shift Keying (ASK) modulation.The unit features a...

Note: All products are tax-inclusive. LoRaWAN470 Unit is a LoRaWAN communication module specifically designed for the 470MHz frequency range. It is developed by M5Stack and provides long-distance communication capabilities using the LoRaWAN protocol.The module utilizes the ASR6501 solution, which offers a combination of ultra-low power...

Note: All products are tax-inclusive. Zigbee Unit is a Zigbee ad hoc network communication module developed by M5Stack. It is designed to enable Zigbee communication in various applications. The module utilizes the CC2630F128 solution, which integrates the Zigbee protocol stack internally.Zigbee Unit features a serial...

Note: All products are tax-inclusive. UWB (Ultra Wide Band) unit is a device that integrates the UWB communication protocol for locating objects and determining their position and orientation. It utilizes nanosecond pulses for precise positioning. The unit is built around the Ai-ThinkerBU01 Transceiver module, which...

Note: All products are tax-inclusive. Isolated RS485 Unit is an isolated half duplex transceiver based on the RS485 bus protocol. It can convert TTL level to RS485 level. Since various electrical noises and transient changes of voltage and current may affect communication, Using CA-IS3082W as...

Note: All products are tax-inclusive. LASER.RX Unit is a laser receiver unit primarily composed of laser diodes. Laser communication devices establish wireless connections through the atmosphere. While the transmission of laser beams occurs through free space, their operation is similar to fiber optic links. Although...

Note: All products are tax-inclusive. LASER.TX is one of the communication devices among the M5Units family - a Laser emitter with adjustable focal length. It is mainly built with a laser diode Laser communications devices are wireless connections through the atmosphere. They work similarly to...

Note: All products are tax-inclusive. MiniJoyC HAT is an expansion base designed for the M5StickC/C-Plus, serving as a joystick controller. It features an XY axis joystick and a button function, providing intuitive control capabilities. The HAT incorporates an I2C HY2.0 standard interface, enabling easy...

Note: All products are tax-inclusive. MiniEncoderC HAT is a rotary encoder extension base designed specifically for the M5StickC Plus/Plus 2. It features a rotary AB encoder with a button function, allowing for precise and intuitive control. The HAT is equipped with a standard Lego...

Note: All products are tax-inclusive. DLight HAT is a digital ambient light sensor module designed to extend the ambient light sensing capability of the M5StickC/C Plus. It incorporates the BH1750FVI sensor, which communicates using the I2C interface and includes a 16-bit analog-to-digital converter (ADC).The BH1750FVI...

Note: All products are tax-inclusive. HEART RATE HAT is a blood oxygen and heart rate sensor that incorporates the MAX30102 module, providing a comprehensive solution for pulse oximetry and heart rate monitoring. This sensor is designed to measure blood oxygen saturation levels and heart rate...

Note: All products are tax-inclusive. C Back Driver Hat is a steering gear drive board designed to be compatible with the M5StickC microcontroller. It utilizes the STM32F030F4P6 control scheme and communicates with the M5StickC Plus/Plus2 through the I2C communication interface.The board provides four sets of...

Note: All products are tax-inclusive. Joystick HAT is a module designed for game controllers and wireless joystick devices. This module is specifically designed for the M5StickC, featuring a compact size and convenient wireless connectivity. It is equipped with an embedded STM32F030F4 microcontroller chip and utilizes the...

Note: All products are tax-inclusive. RS485-HAT is a TTL to RS485 converter for M5StickC. Among M5stack products we have 5 items that include TTL to RS485, they are RS485 unit, RS485 HAT, PLC, LAN, BASE26 they have different input voltage, vary from 5V - 12V.In this...

Note: All products are tax-inclusive. THERMAL HAT is an M5StickC-compatible human infrared thermal camera hat. Built-in MLX90640 thermopile sensor that measures the surface temperature of an object and generates a thermal image through a temperature gradient formed by the surface temperature. Resolution is 32 x 24) MLX90640 Infrared (IR) sensor arrays...

Note: All products are tax-inclusive. PROTO HAT is a HAT size of universal prototyping board. You can have the total freedom to make your own project as you want it, with prototyping boards that allow laying out the customized circuit to interact with stickC port...

Note: All products are tax-inclusive. NCIR HAT is an M5StickC compatible infrared sensor. Same as M5Unit NCIR, this stickc HAT module Integrates MLX90614 which can be used to measure the surface temperature of a human body or other object. Now that it has a cover...

Note: All products are tax-inclusive. Atomic QRCode2 Base is specifically designed for the ATOM series hosts. It is an integrated 1D/2D barcode scanning base that supports 3 major types of 2D barcodes and 8 types of 1D barcodes. The base features a built-in buzzer and...

Note: All products are tax-inclusive. Atomic GPS Base is a GPS positioning module specifically designed for the ATOM series main controller. It incorporates the M8030-KT positioning navigation chip and is equipped with built-in FLASH memory. The module also includes a button cell battery that supports...

Note: All products are tax-inclusive. ATOMIC CAN Base is a CAN bus communication unit designed to be compatible with the ATOM series controllers. It adopts the CA-IS3050G transceiver solution and features a built-in DC-DC isolated power chip that effectively isolates interference and prevents damage...

Note: All products are tax-inclusive. Atomic TF-Card Reader is a module designed to read and write TF (MicroSD) cards. It is a version of the ATOM TF-CARD module that does not include a controller. Instead, it is compatible with Atom Matrix, Atom Lite, AtomS3, and...

Features Espressif official ESP32-WROOM-32module Lastest ESP32 Version: REV1 4MB FLASH Lithium battery interface,500mA Max charging current Compatible with Arduino,MicroPython Defaultfirmware: lastest MicroPython Tutorials GetstartedwithMicroPython[D32series] GetstartedwithArduino[D32series] Documentation SchematicV1.0.0[PDF] DimensionV1.0.0[PDF] CH340Driver Technicalspecs OperatingVoltage    3.3V SupportedBattery    Lipo3.7V BatteryConnector    PH-22.0mm DigitalI/OPins    22 AnalogInputPins    6(VP,VN,32,33,34,35) AnalogOutputPins    2(25,26) LED_BUILTIN    GPIO5...

Note: All products are tax-inclusive. Description Atomic Stepmotor Base is the standalone version of the ATOM Stepmotor, designed for users who already have an ATOM series controller and can directly purchase the base for use. This base is equipped with a high-performance DRV8825 driver chip,...

Note: All products are tax-inclusive. Description Atomic SPK Base is an audio player designed for Atom Lite and AtomS3 Lite. It features the NS4168 power amplifier chip with a built-in I2S digital audio interface. It has automatic sampling rate detection and adaptive functionality to effectively...

Product parameters Plate size: 25mm*30mmPhotosensitive chip: GC0308Pixel 300000Output image format: MJPEGPhotosensitive signal-to-noise ratio: to be determinedUSB interface type: USB2.0Support OTG: usb2.0Maximum resolution and frame rate: 640 * 480/30fps. MJPGFocusing mode: manual focusing.Working voltage: 5VAdapt to the working environment temperature: minus 5 to 70 degrees.Support...

Note: All products are tax-inclusive. Description Atomic RS232 Base is a  TTL-RS232 level converter specifically designed for Atom Series controllers.  With RS-232 being the industry standard for serial communication between computers and peripheral devices, this converter ensures seamless and reliable data transmission by precisely defining electrical characteristics...

Product Parameters Sensor: 720P CMOS Lens Size: 1/4 The most effective pixel: FULL HD 1280(H)X720(V) Output image format: MJPEG / YUV2 (YUYV) Supported resolution: 320*240 MJPEG@30fps 352*288 YUV2@30fps 352*288 MJPEG@30fps 640*480 YUV2@25fps 800*600 MJPEG@30fps 320*240 YUV2@30fps 1280*720 MJPEG@25fps 800*600 YUV2@15fps 640*480 MJPEG@25fps 1280*720 YUV2@10fps...