Munich

The XIAO RP2350 is a real powerhouse! It packs all the amazing capabilities of the Raspberry Pi RP2350 (switchable architecture of dual Arm Cortex-M33 cores running at 150MHz with FPU, and dual open-hardware Hazard3 RISC-V cores, enhanced security, and encryption) into the classic XIAO form...

Trigger setting mode:(1- > Short ; 0- > No Short)AB=00:No-lock High TTL level ouput;AB=01:Self-lock High TTL level ouput;AB=10:No-lock Low TTL level ouput;AB=11:Self-lock Low TTL level ouput;

The 6x10 RGB Matrix extension board for Seeed Studio XIAO is a vibrant canvas for your wearable devices. With a total 60 WS2812B LEDs, it comes with the same thumb-sized board as XIAO and supports multiple splice extensions. Feature Matrix 6x10 RBG extension board...

Seeed Studio XIAO ESP32S3 leverages a dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates a built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB FLASH, and external SD card slot. All of these make it...

M5PoECAM-W V1.1 is a programmable PoE camera based on the "ESP32+W5500" solution, featuring a 3-megapixel OV3660 image sensor with a 65° field of view. It integrates PoE (power over Ethernet, max power consumption 6W) and Wi-Fi functionality. Equipped with 16MB Flash and 8MB PSRAM, programs can...

The RELAY unit is a relay unit designed to facilitate the control of the on/off state of circuits operating at DC/3A-30V or AC/3A-220V levels. It operates as an automatic switch, wherein a small current governs the operation of a larger current. In the context...

Note: All products are tax-inclusive. RGB LED Strip is a programmable RGB LED strip, utilizing SK6812 RGB LEDs. The LED strip supports digital addressing, which means that you can individually control the color and brightness of each individual LED on the LED strip. Single-bus programming is supported...

HAT-SPK2 is a speaker designed specifically for the M5SticKC PLUS platform. It features a built-in MAX98357 digital audio I2S amplifier IC and a 1W speaker, providing high-quality audio output. The speaker supports audio input with a sample rate ranging from 16-bit, 32kHz to 192kHz, ensuring...

CoreInk represents a significant advancement within the M5Stack cores portfolio, providing an innovative E-ink display experience. Driven by the ESP32-PICO-D4 chip, this remarkable device features a 1.54-inch black and white E-ink display with a resolution of 200x200 pixels. In contrast to traditional liquid crystal...

The M5StampS3 series is a highly integrated embedded controller powered by the ESP32-S3FN8 chip. Both variants, M5StampS3 PIN1.27 and M5StampS3 PIN2.54, are equipped with 8MB SPI flash memory for ample storage capacity and a high-performance Xtensa 32-bit LX7 dual-core processor, capable of running at...

The M10 GPS is equipped with a multi-constellation Global Navigation Satellite System (GNSS) powered by the u-blox M10 series, which functions as a concurrent GNSS receiver capable of receiving and tracking multiple GNSS systems simultaneously. Due to its advanced multi-band radio frequency front-end architecture,...

Electrical Characteristics Input Characteristics (Normal Temperature Test) Rated Input Voltage: 90-245VAC Input Voltage Range: 85-264VAC / 70-350VDC Maximum Input Voltage: ≤270VAC Input Current: ≤0.2A Inrush Current: ≤10A Input Soft Start: ≤50ms External Fuse Recommendation: 0.5A/250VAC Slow-blow Fuse Input Power Efficiency: ≥69% / 70% (110/220VAC)...

Note: All products are tax-inclusive. M5Core2 is the upgraded second-generation core device in the M5Stack IoT development kit series. It features an ESP32 D0WDQ6-V3 MCU with dual-core processors, Wi-Fi, 16MB Flash, 8MB PSRAM, and a 2.0-inch capacitive touch screen. It includes a USB Type-C interface,...

The ESP32-S3-Nano utilizes the ESP32-S3R8 chip and is compatible with the Arduino Nano ESP32. Its compact design, coupled with robust capabilities, makes it well-suited for applications in the Internet of Things (IoT) and MicroPython. Additionally, it offers ease of integration into various projects, enhancing...

The compact GY-521 module is based on the MPU-6050 NEMS chip, and combines a 3-axis gyroscope and a 3-axis accelerometer with a digital motion processor (DMP) and a temperature sensor.The sensor data is read out via the I²C bus, therefore you only need 2...

  IR Receiver   Adopt 1838 remote control receiver with high sensitivity Working voltage 5V output type: digital outputs There are 2 fixing holes for easy installation. Aperture 3.1mm with date indicator   Wiring instructions DAT digital output interface VCC 5V DC power supply positive...

Note: All products are tax-inclusive. CAMS3 5MP Unit is a streamlined camera module based on the ESP32S3, supporting WiFi cloud image transmission. It features 8M PSRAM and 16M Flash memory, paired with a custom 5-megapixel camera (PY260) that has a DFOV of 88° and can...

ESP8685-WROOM-04 is a general-purpose Wi-Fi and low-power Bluetooth LE module with powerful peripheral interfaces for smart home, industrial automation, healthcare, consumer electronics, etc. The ESP8685-WROOM-04 adopts PCB on-board antenna. ESP8685-WROOM-04 series model comparison is shown in the table below: the module adopts the ESP8685H4...

250x122, 2.13inch E-Ink Display HAT For Raspberry Pi, SPI Interface 2.13″ E-Paper HAT Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect Ideal for price tags, shelf labels, industrial instruments... Size2.13" Resolution250×122 Viewing Angle>170° Display ColorBlack and White CommunicationSPI Display PanelE-paper ExperiencePaper-like EnvironmentAmbient Light...

The DS18B20 is a commonly used digital temperature sensor that outputs a digital signal. It is characterized by its small size, strong anti-interference ability, and high accuracy. The digital temperature sensor is easy to wire and can be used in various non-extreme temperature scenarios...

A push button switch, also known as a tactile switch, operates by applying pressure in the direction of the switch to meet the actuation force requirement, causing the switch to close and connect. When the pressure is removed, the switch opens. The internal mechanism...

Note: All products are tax-inclusive. DAC2 Unit is an I2C digital-to-analog signal conversion unit. It utilizes the GP8413 solution, which provides high precision and accuracy in its performance. This chip can linearly convert a 15-bit digital value into two independent analog voltages of 0-5V or...

The relay is composed of an iron core, a coil, an armature, a contact spring, etc. When a certain voltage is applied to both ends of the coil, a certain current will flow through the coil, thereby generating an electromagnetic effect. The armature will...

ESP8266 ESP-01S WLAN WiFi module is designed with high quality materials, it is small, convenient and powerful, making it suitable for small or large projects.The best thing about ESP8266 is that it gives you WLAN communication, so you can use it to connect to...

Note: All products are tax-inclusive. AIN4-20mA Unit is a highly capable single-channel 4~20mA current analog measurement unit. Powered by the STM32G030F6 main control chip, it communicates seamlessly with the M5 host through i2c, ensuring efficient and reliable data transmission. This unit offers flexibility in...

Note: All products are tax-inclusive. LCD Unit is a 1.14-inch color LCD expansion screen unit designed for displaying simple content as a display panel. It features a resolution of 135x240 pixels and utilizes the ST7789V2 drive scheme. The LCD Unit supports RGB666 display, allowing for...

Note: All products are tax-inclusive. Scales Kit is a high-precision low-cost weighing kit. This digital Scales kit consists of four pieces of half-bridge resistive strain gauges, with a total weighing range of 200kgs. It is equipped with a 24-bit A/D converter chip HX711, specially designed for...

Note: All products are tax-inclusive. The TimerPWR Unit is a timed power supply unit that offers a range of functions, including charging and discharging, timed switching, screen display, and boost output. The device features an internal STM32 microcontroller that implements RTC and overall control, allowing...

Note: All products are tax-inclusive. Introducing the 1.27-Socket Kit for StampS3 - the perfect solution for enhancing your M5StampS3 experience! This high-quality header features a pitch of 1.27mm, specifically designed to seamlessly integrate with the M5StampS3 development board.With the 1.27-Socket Kit, users gain the flexibility to...

Note: All products are tax-inclusive. The LoRa868_V1.1 Module is a LoRa communication module in the M5Stack stacking module series, operating at a frequency of 868MHz. This module comes standard with an SMA antenna and additionally reserves two patch MCX antenna socket interfaces, allowing users to freely...

Note: All products are tax-inclusive. Description Atomic SPK Base is an audio player designed for Atom Lite and AtomS3 Lite. It features the NS4168 power amplifier chip with a built-in I2S digital audio interface. It has automatic sampling rate detection and adaptive functionality to effectively...

Note: All products are tax-inclusive. MiniEncoderC HAT is a rotary encoder extension base designed specifically for the M5StickC Plus/Plus 2. It features a rotary AB encoder with a button function, allowing for precise and intuitive control. The HAT is equipped with a standard Lego...

Note: All products are tax-inclusive. LoRaWAN470 Unit is a LoRaWAN communication module specifically designed for the 470MHz frequency range. It is developed by M5Stack and provides long-distance communication capabilities using the LoRaWAN protocol.The module utilizes the ASR6501 solution, which offers a combination of ultra-low power...

Note: All products are tax-inclusive. IMU Pro Mini Unit is a versatile and integrated inertial motion unit. It incorporates advanced six-axis attitude sensors (BMI270), a three-axis geomagnetic sensor (BMM150), and an atmospheric pressure sensor (BMP280) to provide comprehensive measurement and detection capabilities for users. Whether...

The M5Stack FIRE V2.7 features the Espressif ESP32 main control chip, which is powered by two low-power Xtensa® 32-bit LX6 microprocessors operating at a high frequency of 240 MHz. It includes an 8 MB PSRAM and a 16 MB FLASH memory combination. This device...

NOTE: This product is priced including tax for the European region. Raspberry Pi Pico 2 RP2350 is a small but powerful microcontroller development board, equipped with Raspberry Pi's own RP2350 chip, with high performance and low power consumption. It is equipped with a dual-core...

Seeed Studio XIAO ESP32S3 leverages 240MHz Xtensa 32-bit LX7 dual-core processor, supporting both WiFi and BLE 5.0 wireless connectivities, a 2.4GHz Rod antenna, allows for deep sleep mode with power consumption as low as 14μA while supporting lithium battery charging management. Ideal for the Internet of Things, Smart Homes,...

Note: All products are tax-inclusive. LoRa868 is a LoRa communication module in the M5Stack stack module series (working frequency is 868MHz). A certain expansion space is reserved on the module, which defeats you for a more functional design. For wireless communication or projects with more...

Note: All products are tax-inclusive. NeoHEX is an impressive hexagonal board featuring 37 RGB LED flexible beads, designed to create a visually stunning display. The board is controlled using a single BUS, allowing for easy integration and control. It supports the connection of multiple boards,...

Note: All products are tax-inclusive. Atomic RS485 Base is a versatile TTL-RS485 converter designed specifically for use with M5Atomic. This converter serves as a bridge between the TTL level and the RS485 level, allowing seamless communication between devices. RS485 is a widely adopted communication protocol standard...

Note: All products are tax-inclusive. COMMU is a Multi-Communication-Interface-Converter. Integrated with 2I2C, 1TTL, 1CAN, 1RS485. Apparently, COMMU is packed with most of a series of communications. Default connection: TTL - UART0, RS485 - UART2. Since the ESP32 pin map is allowed for re-assignment, you can re-assign...

Note: All products are tax-inclusive. RS485 is a TTL to RS485 convertor. RS485 is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems, widely used in the industrial field. multi-point systems are supported. It's used to convert the...

The CH340E USB to TTL is a converter module used to transform a USB interface into a serial TTL signal. It features the CH340E chip, known for its compact design and stable communication performance, making it ideal for embedded development, microcontroller programming, and debugging....

LD2410B is a highly sensitive 24GHz human presence status sensing module developed by Hi-link. It operates based on the principle of using FMCW (Frequency-Modulated Continuous Wave) to detect human targets within a defined space. Through the combination of radar signal processing and a precise...

LD2410C is a highly sensitive 24GHz human presence status sensing module developed by Hi-link. Its operational principle is to employ FMCW frequency-modulated continuous waves to detect human targets within the defined space. Through the combination of radar signal processing and accurate human body sensing...

The Mega 2560 R3 CH340 is an Arduino-compatible development board powered by the ATmega2560 microcontroller. It features: 54 digital input/output pins, including 15 pins capable of PWM output. 16 analog input pins for precise data acquisition. A 16MHz crystal oscillator for stable performance. Connectivity...

Note: All products are tax-inclusive. SCREW would be a necessary tool used on M5Stack development. If you have multiple layers stacked up you might want to fix them up with something. Here comes this SCREW Accessory Kit, packed with different lengths of M3 screws. Getting...

Note: All products are tax-inclusive. RCA unit is a female jack terminal block specifically designed for transmitting composite video and audio signals. It serves as a standard connector for A/V (audio/video) applications, allowing the transmission of video and audio signals from a component device...

Note: All products are tax-inclusive. An 8Angle unit is an input unit that combines eight adjustable potentiometers to provide precise control functionality. It utilizes an internal STM32F030 microcomputer as the acquisition and communication processor, enabling efficient data processing and communication. The unit communicates with...

Note: All products are tax-inclusive. ENV Pro Unit is an environmental sensor that utilizes the BME688 sensor solution, supporting the measurement of various environmental parameters such as volatile organic compounds (VOCs), indoor air quality (IAQ), temperature, humidity, and atmospheric pressure. It features a compact size,...