M5Stack Tab5 IoT Development Kit (ESP32-P4)
📦 Location of the warehouse: China
🚚 We will ship your order within 1-3 working days after the order is taken.
Free Shipping from 30€ in Germany, 50€ in the EU!
- EU & US Countries Delivery Time: 5~10 working days.
- Other Countries Delivery Time: 2~2.5 weeks.
- Pre-Ordering: If an item is unavailable, you can pre-order it. We'll dispatch once stock is replenished. For specific delivery times, please feel free to contact us for inquiries.
- Express Shipping: Need it faster? Contact us via email or through our live chat support, and we'll arrange expedited delivery for you.
M5Stack Tab5 IoT Development Kit (ESP32-P4)
M5Stack Tab5 is a highly extensible, portable smart IoT terminal development device designed for developers, integrating a dual-chip architecture and abundant hardware resources. Its main controller adopts the RISC‑V–based ESP32‑P4 SoC, equipped with 16 MB Flash and 32 MB PSRAM; the wireless module uses the ESP32‑C6‑MINI‑1U, supporting Wi‑Fi 6. Its antenna system can freely switch between the built-in 3D antenna and the external MMCX antenna interface, flexibly adapting to different deployment environments to ensure data throughput and low-latency control.
In terms of vision and interaction, Tab5 features a 5″ 1280×720 IPS TFT display via a MIPI‑DSI interface, with touch handled by the GT911 multi-point touch controller (I²C) for a smooth and responsive touch experience; it also includes an SC2356 2 MP camera (1600×1200) via a MIPI‑CSI interface, capable of high-definition video recording, image processing, and edge AI applications (e.g., face recognition, object tracking).
For peripheral interfaces, Tab5 offers USB‑A (Host) and USB‑C (USB 2.0 OTG) ports for connecting traditional peripherals like a mouse or keyboard; industrial scenarios can use RS‑485 (SIT3088 + DIP switch–selectable 120 Ω termination) bus communication. Grove, M5BUS, GPIO_EXT header, and Micro SD card slot, as well as reserved STAMP pads (supporting Cat.M, NB‑IoT, LoRaWAN, etc.), allow flexible expansion with various sensors and communication modules. It also includes Reset/Boot buttons for quick reset and entering firmware download mode.
In audio/video, Tab5 uses the ES8388 audio codec, paired with the ES7210 AEC echo-cancellation front end, a dual-microphone array, a 3.5 mm headphone jack, and a speaker for high-fidelity recording/playback and accurate voice recognition. The built-in BMI270 6-axis sensor (accelerometer + gyroscope, with interrupt wakeup) can trigger the main controller in motion-tracking and posture-detection scenarios, improving responsiveness in low-power conditions.
For time and power management, Tab5 integrates the RX8130CE real-time clock (with timed interrupt wakeup), supports a removable NP‑F550 lithium battery, and includes MP4560 boost/buck management, IP2326 charge/discharge control, and INA226 real-time monitoring circuitry—ensuring stable operation without external power.
Structurally, Tab5 features a standard 1/4″‑20 tripod mount on the side, allowing direct attachment to tripods or other mounts for easy shooting and deployment.
Tab5 is suitable for smart home control, remote monitoring, industrial automation, IoT prototyping, education, and research—providing developers and enterprises a comprehensive, easily expandable, high-performance development platform.
Features
- ESP32‑P4 dual-core main controller
- ESP32‑C6 wireless module
- Wi‑Fi 6
- Built-in 3D antenna & MMCX external antenna port
- 5″ 720P MIPI‑DSI display
- GT911 multi-point touch
- SC2356 2 MP camera
- USB‑A Host + USB‑C OTG
- RS‑485 industrial interface
- Grove & M5BUS expansion
- Micro SD card slot
- STAMP expansion
- ES8388 audio codec
- ES7210 AEC dual microphone
- 1 W speaker + 3.5 mm headphone jack
- BMI270 6-axis sensor
- RX8130CE real-time clock
- Reset/Boot & Power buttons
- NP‑F550 removable battery
- Standard 1/4″‑20 tripod mount
- Development platform:
ESP-IDF
Includes
Tab5 Kit
- 1 × Tab5 Kit
- 1 × 1.25‑6P single‑end connector cable
- 1 × NP‑F550 2000 mAh removable battery
Applications
- Smart home control
- Remote monitoring systems
- IoT device development
- Industrial automation
Specifications
| Specification | Parameters |
|---|---|
| Main Controller SoC | ESP32‑P4NRW32 (RISC‑V 32‑bit, dual‑core/single‑core switchable, up to 400 MHz) |
| Wireless Module SoC | ESP32‑C6‑MINI‑1U (supports Wi‑Fi 6 @ 2.4 GHz / Thread / ZigBee) |
| Antenna | Built‑in 3D antenna & 2 x MMCX external antenna port |
| Flash | 16 MB |
| PSRAM | 32 MB |
| Display | 5 Inch IPS TFT (1280×720) |
| Touch | GT911 multi-point touch controller (I²C) |
| Camera | SC2356 @ 2 MP (1600×1200), via MIPI‑CSI |
| Audio Chip | ES8388 codec; ES7210 AEC front end |
| Microphone | Dual-microphone system (AEC echo cancellation) |
| Speaker | 1 W@8 Ω NS4150B |
| Headphone Jack | 3.5 mm |
| USB Ports | USB‑A (Host), USB‑C (USB 2.0 OTG) |
| RS485 Port | SIT3088 (120 Ω selectable termination) Supply: 6 ~ 24 V |
| Expansion Interfaces | 1 × Grove, 1 × M5BUS, GPIO_EXT header |
| Storage Expansion | Micro SD card slot |
| Stamp Expansion Pads | Supports Stamp Cat.M / NB‑IoT / LoRaWAN modules |
| Motion Sensor | BMI270 6-axis (accelerometer + gyroscope, interrupt wakeup support) |
| RTC | RX8130CE real-time clock (timed interrupt wakeup support) |
| Reset/Boot Buttons | 1× button for power on/off and download mode entry |
| Charge Management | IP2326 charge management chip |
| Power Monitoring | INA226 (bus current/voltage monitoring) |
| Battery | NP‑F550 removable lithium battery, 7.4 V @ 2000 mAh (14.8 Wh) |
| Operating Temperature | 0 ~ 40 °C |
| Product Size | Tab5: 128.0 × 80.0 × 12.0 mm Tab5 Kit: 128.0 × 80.0 × 26.7 mm |
| Product Weight | Tab5: 124.5 g Tab5 Kit: 277.4 g Battery: 97.9 g |
| Package Size | Tab5: 148.0 × 103.0 × 21 mm Tab5 Kit: 191.0 × 103.0 × 25.0 mm |
| Gross Weight | Tab5: 162.5 g Tab5 Kit: 277.4 g |
PinMap
PI4IOE5V6408
| ESP32-P4 | G32 | G31 | CHIP_PU |
|---|---|---|---|
| PI4IOE5V6408 | SCL | SDA | RST |
CAM
| ESP32‑P4 | CAM |
|---|---|
| G32 | CAM_SCL |
| G31 | CAM_SDA |
| G36 | CAM_MCLK |
| CSI_DATAP1 (dedicated) | CAM_D1P |
| CSI_DATAN1 (dedicated) | CAM_D1N |
| CSI_CLKP (dedicated) | CAM_CSI_CKP |
| CSI_CLKN (dedicated) | CAM_CSI_CKN |
| CSI_DATAP0 (dedicated) | CSI_DOP |
| CSI_DATAN0 (dedicated) | CSI_DON |
| PI4IOE5V6408 | P6 |
|---|---|
| CAM | CAM_RST |
NS4150B
| PI4IOE5V6408 | P1 |
|---|---|
| NS4150B | SPK_EN |
ES8388
| ESP32-P4 | G30 | G27 | G26 | G29 | G32 | G31 |
|---|---|---|---|---|---|---|
| ES8388 | MCLK | SCLK | DSDIN | LRCK | CCLK | CDATA |
ES7210
| ESP32-P4 | G30 | G27 | G28 | G29 | G32 | G31 |
|---|---|---|---|---|---|---|
| ES7210 | MCLK | SCLK | ASDOUT | LRCK | CCLK | CDATA |
LCD
| ESP32‑P4 | ILI9881C |
|---|---|
| G22 | LEDA |
| G23 | TP_INT |
| G31 | SDA |
| G32 | SCL |
| DSI_CLKN (dedicated) | DSI_CK_N |
| DSI_CLKP (dedicated) | DSI_CK_P |
| DSI_DATAN1 (dedicated) | DSI_D1_N |
| DSI_DATAP1 (dedicated) | DSI_D1_P |
| DSI_DATAN0 (dedicated) | DSI_D0_N |
| DSI_DATAP0 (dedicated) | DSI_D0_P |
| PI4IOE5V6408 | P5 | P4 |
|---|---|---|
| ILI9881C | TP_RST | LCD_RST |
BMI270 & RTC (RX8130CE) & INA226
| ESP32-P4 | G32 | G31 |
|---|---|---|
| BMI270 | SCL | SDA |
| RX8130CE | SCL | SDA |
| INA226 | SCL | SDA |
- Interrupt Wakeup (PMS150G-U06 power management)
| PMS150G-U06 | PA6/CIN‑ |
|---|---|
| BMI270 | INT(E_TRG) |
| RX8130CE | INT(E_TRG) |
ESP32-C6
| ESP32-P4 | G11 | G10 | G9 | G8 | G13 | G12 |
|---|---|---|---|---|---|---|
| ESP32-C6 | SDIO2_D0 | SDIO2_D1 | SDIO2_D2 | SDIO2_D3 | SDIO2_CMD | SDIO2_CK |
MicroSD
| ESP32-P4 | G39 | G40 | G41 | G42 | G43 | G44 |
|---|---|---|---|---|---|---|
| MicroSD SPI Mode | MISO | CS | SCK | MOSI | ||
| MicroSD SDIO Mode | DAT0 | DAT1 | DAT2 | DAT3 | CLK | CMD |
RS485
| ESP32-P4 | G21 | G20 | G34 |
|---|---|---|---|
| SIT3088 | RX | TX | DIR |
IP2326
| PI4IOE5V6408 | P7 | P6 |
|---|---|---|
| IP2326 | CHG_EN | CHG_STAT |
1. General Shipping Information
- We provide premium shipping methods with a tracking number for each order.
-
Shipping address should be input in English without any special symbols to help the courier company recognize your address in the system. We will ship according to the shipping address you provided. Please notify us of any address change before your order is marked "Shipped" to avoid parcel loss.
-
Please contact our customer service staff immediately if you need to cancel or change an order. Once your order has reached "Shipped" status, it can no longer be canceled or changed in any way. To avoid complications, please recheck your shopping cart before checkout.
-
We can ship all in-stock orders within 1 business day as your order has been confirmed.
-
All items are inspected before dispatch and are carefully hand-packed.
-
With standard courier practice, you need to check the contents of the parcel before signing for your goods. Otherwise, we will not be held responsible for any damage that may have occurred in transit.
2. Shipping Options for Germany and EU* countries
(For Products in Munich Warehouse)
2.1 Shipping options for an order value of up to €30 inside Germany or €50 inside the EU*
Shipping Options:
| Shipping Options | Germany | EU* |
|---|---|---|
|
Deutsche Post |
€3.5 Arrive in 3-4 Business Days |
€6 Arrive in 5-9 Business Days |
|
DHL Paket |
€6 Arrive in 2-3 Business Days |
€15 Arrive in 3-7 Business Days |
|
DHL Express |
€14 Arrive in 1-2 Business Day |
€65 Arrive in 2-3 Business Days |
2.2 Free shipping options for an order value of above €30 inside Germany or €50 inside the EU*:
| Free Shipping Options | Germany | EU* |
|---|---|---|
|
Deutsche Post |
Free Above €30 | Free Above €50 |
|
DHL Paket |
+ €2 for Above €30 / Free Above €60 | + €8 for Above €50 / Free Above €80 |
|
DHL Express |
+ €10 for Above €30 | + €60 for Above €50 |
-
Certain EU Countries are not included in our EU Zone definition: United Kingdom (excluding Ireland), Switzerland, Liechtenstein, Vatican City, Albania, Belarus, Norway, Ukraine, and Iceland. For the above countries, the International Shipping Rule applies.
2.3 Shipping Options for International Countries:
(via Deutsche Post or YunExpress)
| Order Amount | International |
|---|---|
| €0 - €15 | €8 |
| €15 - €30 | €7 |
| €30 - €50 | €6 |
| €50 and above | €4 |
Important Notice:
- Please verify the inventory location on the product page before placing your order to confirm delivery timeframes.
- For products in the Shenzhen warehouse, we will typically first ship the products from the Shenzhen warehouse to our Munich warehouse, which will take around 1.5 weeks. After we receive the shipment in Munich, we will send the items to you. We will only arrange YunExpress shipping from Shenzhen for orders with products in the Shenzhen warehouse worth more than €50.
- If you place an order with products from both Munich and Shenzhen warehouses, we will first ship the products in the Munich warehouse, and then send the remaining products to you when we receive them from Shenzhen.
3. International Warehouse
3.1 German Warehouse
3.2 Chinese Warehouse
4. Customs and Taxes
4.1 How are customs handled by OpenELAB for import or export?
4.2 How is VAT charged when the Customer places an order from OpenELAB?
4.3 What kind of fee will be charged except VAT?
Effective Date: March 27, 2025
At OpenELAB, we are committed to providing accurate product descriptions and delivering high-quality products. If you experience any issues with your purchase, please notify us within 30 days of the shipment date.
1. Warranty Disclaimer
Unless explicitly stated in a specific agreement or purchase order, OpenELAB makes no warranties—express or implied—regarding the fitness, suitability, or merchantability of any product for a particular purpose or special use.
2. Warranty Policy
Warranty Period
The standard warranty period for products sold by OpenELAB is 12 months from the date of delivery.
Under this warranty, OpenELAB will make a reasonable effort to repair or replace products free of charge if defects are due to issues with raw materials, design, or manufacturing.
If the defect qualifies under this policy but falls outside the covered scope, reasonable charges may apply for repair or replacement.
After the warranty period, support may still be available at a reasonable fee.
Warranty Exclusions
The warranty does not apply in the following cases:
- The product is beyond the 12-month warranty period.
- Damage due to misuse, improper maintenance or storage, or failure to follow the user guide or manual.
- Issues caused by Force Majeure events (e.g., natural disasters, war, legal changes, etc.).
- Unauthorized repair attempts by the customer.
- The product is not defective but has been opened and is non-returnable by policy.
3. Returns & Refunds
If you're not satisfied with your purchase, you may be eligible for a return or exchange:
- Return for Refund: Within 15 days of receipt (unopened).
- Return for Replacement: Within 30 days of receipt (damaged or defective).
- Exchange Window: Up to 30 days from receipt.
Please email us at info@openelab.io for a return authorization before sending anything back.
Return Conditions
- Items must be in original, clean, and mint condition with packaging intact.
- Returns of damaged, used, scratched, modified, or programmed items will not be accepted.
- Include the receipt, a brief note with your name, order number, and reason for return.
Shipping & Fees
- Customers are responsible for return shipping to our warehouses in Europe, the US, or China.
- Refunds may be subject to additional shipping fees unless the return is due to our error.
- A flat €8 shipping fee will be deducted for returned items that originally qualified for free shipping.
Payment Platform Fees
For refunds processed through third-party platforms such as PayPal or Braintree, a standard 3.5% service fee may be deducted to cover payment processing costs.
