Sensor
-
EASY PLUG RJ11 Reed Switch Module - OpenELAB
This is a small device called a reed switch on the module.When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes.When the magnetic field is removed, the reeds separate and the switch...- €12,00 EUR
€12,00 EUR- €12,00 EUR
- Unit price
- per
-
EASY PLUG RJ11 Red LED Module - OpenELAB
This is a special LED module. When connecting to ARDUINO, after programming, it can emit beautiful red light. Of course, you can also control it by PWM. It will be like fireflies at night.You can combine with other sensors to do various interactive experiments.This...- €8,80 EUR
€8,80 EUR- €8,80 EUR
- Unit price
- per
-
EASY PLUG RJ11 Photo Interrupter Module - OpenELAB
This is a high performance EASY Plug photo interrupter module.The upright part on the module combines an infrared light emitting diode and shielded infrared detector.By emitting a beam of infrared light from one end to another end, the sensor can detect an object when...- €12,00 EUR
€12,00 EUR- €12,00 EUR
- Unit price
- per
-
EASY PLUG RJ11 Passive Buzzer Module - OpenELAB
We can use Arduino to make many interactive works of which the most commonly used is acoustic-optic display.The buzzer we introduced here is a passive buzzer. It cannot be actuated by itself, but by external pulse frequencies.Different frequencies produce different sounds. You can use...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 IR Transmitter Module - OpenELAB
An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light).In an infrared remote control, for example, pushing a button sends an electric signal to the LED, which converts the signal into a beam of infrared light. The receiving...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 IR Infrared Receiver Module - OpenELAB
Infrared receiver is a component with functions of reception, amplification, and demodulation. The internal IC has already been demodulated so that can directly output digital signal.Well, it will be also easy to make your own IR controller using IR transmitter.This module should be used...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 Green LED Module - OpenELAB
This is a special LED module. When connecting to ARDUINO, after programming, it can emit beautiful green light. Of course, you can also control it by PWM. It will be like fireflies at night.You can combine with other sensors to do various interactive experiments.This...- €8,80 EUR
€8,80 EUR- €8,80 EUR
- Unit price
- per
-
EASY PLUG RJ11 Digital Push Button Module - OpenELAB
The EASY Plug Push-button module is a tidy little design that lets you control a DC power source using an everyday tactile button.This basic application module is widely applied to Arduino, and Raspberry Pi platforms.When the button is pressed, it outputs HIGH level signal;...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG Bluetooth 2.0 Module for Arduino - OpenELAB
Bluetooth 2.0 module can easily achieve serial wireless data transmission. The operating frequency is among the most popular 2.4GHz ISM frequency bands (i.e. Industrial, scientific, and medical). It adopts Bluetooth 2.1+EDR standard. In Bluetooth 2.1, signal transmit time of different devices stands at a...- €19,90 EUR
€19,90 EUR- €19,90 EUR
- Unit price
- per
-
EASY PLUG DS3231 Clock Module - OpenELAB
The DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO) and crystal.A real-time clock (RTC) is a computer clock (most often in the form of an integrated circuit) that keeps track of the current time. It...- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
-
EASY PLUG L9110 Fan Module for Firefighting Robot - OpenELAB
Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. Add flavor to your own interesting projects with this module.The fan motor module uses the L9110 driver to control the forward and reverse rotation of propeller. It...- €7,80 EUR
€7,80 EUR- €7,80 EUR
- Unit price
- per
-
EASY PLUG RJ11 Active Buzzer Module - OpenELAB
Hey want to hear a really loud noise? Apply 3.3V to 5V to this buzzer module and you'll be rewarded with a loud beep. Here is the simplest sound making module. You can use high/low level to drive it. Just change the frequency it...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
TTP229L 16-key Touch Sensor for arduino Uno R3 - OpenELAB
This is a 16-key digital capacitive touch switch sensor, using the working mode of a capacitive sensing trigger. Its communication is I2C communication, with simple and convenient wiring. Onboard TTP229 capacitive 16-key touch sensor IC Onboard power indicator Working voltage: 2.4V-5.5V Support to set...- €7,80 EUR
€7,80 EUR- €7,80 EUR
- Unit price
- per
-
Rotation Sensor
An encoder is a rotary sensor that converts rotational displacement into a series of digital pulse signals. By rotating, it can count the number of pulses output during the forward and reverse rotations. Unlike a potentiometer, this type of rotational count is unlimited. By...- €3,50 EUR
€3,50 EUR- €3,50 EUR
- Unit price
- per
-
OpenELAB Sensor Starter V2.0 Kit 37 in 1 Box Starter Kit
This is a 37 in 1 sensor learning kit for Arduino, rolled out by OpenELAB. Inside this kit are digital/analog sensors, as well as some special modules such as ultrasonic module, joystick, relay module and acceleration modules, etc. For each module, we provide a...- €89,99 EUR
€89,99 EUR- €89,99 EUR
- Unit price
- per
-
OpenELAB 48 in 1 Sensor Module Kit With Gift Box
This sensor kit contains 48 kinds of commonly used sensor modules in playing the microcontroller, such as active buzzer module, 5V relay module, temperature and humidity module and so on. It is compatible with various microcontrollers and Raspberry Pi. At the same time, we...- €99,00 EUR
€99,00 EUR- €99,00 EUR
- Unit price
- per
-
M5Stack Ultrasonic Distance Unit I/O
SONIC IO Unit is an ultrasonic range sensor module that interfaces with GPIO (General Purpose Input/Output) pins. It incorporates the RCWL-9620 ultrasonic distance measurement chip with a 16mm probe. The ranging accuracy of this sensor can reach from 2cm to 450cm, with an accuracy level...- €7,50 EUR
€7,50 EUR- €7,50 EUR
- Unit price
- per
-
M5Stack Time-of-Flight Distance Unit (VL53L1X)
ToF4M Unit is a high-precision distance sensor module that utilizes the VL53L1CXV0FY/1 sensor and employs Time-of-Flight (ToF) technology. It is capable of measuring object height, detecting object presence, and tracking object movement within a range of 4cm to 400cm. It finds applications in robotics, autonomous...- €10,50 EUR
€10,50 EUR- €10,50 EUR
- Unit price
- per
-
M5Stack PIR Motion Sensor
PIR is a human body infrared unit. It belongs to the "passive pyroelectric infrared detector". It detects the infrared radiation emitted and reflected by the human body or object. When infrared is detected, the output level is high and it takes a while. Delay (high...- €6,50 EUR
€6,50 EUR- €6,50 EUR
- Unit price
- per
-
M5Stack Finger Print Sensor Unit
FINGER is a fingerprint recognition sensor designed to provide reliable and convenient biometric fingerprint recognition capabilities. It features the integrated FPC1020A capacitive fingerprint recognition module, which enables functions such as multi-fingerprint enrollment, image processing, feature extraction, fingerprint matching, and searching.Utilizing the UART communication protocol, FINGER...- €28,00 EUR
€28,00 EUR- €28,00 EUR
- Unit price
- per
-
EASY PLUG Robot 3-way Line Tracking Sensor - OpenELAB
This hree-way tracking sensor needs to be used together with the EASY plug Control board V2.0. The module is connected to the SPI interface with only one wire, which is very convenient and simple. The module comes with two round holes, easy to fix...- €12,00 EUR
€12,00 EUR- €12,00 EUR
- Unit price
- per
-
EASY PLUG SR01 Ultrasonic Sensor - OpenELAB
Ultrasonic sensors use sonar to determine the distance from the object. This module uses a CS100A chip that can test the distance from 4 cm to 300 cm is unequal, easy to use. Its measure distance is accurate and stable, which can be applied...- €12,00 EUR
€12,00 EUR- €12,00 EUR
- Unit price
- per
-
EASY PLUG SR01 Ultrasonic Sensor Module V2.0 - OpenELAB
The distance sensor are really common in robotics projects, very useful for automation, interactive art and motion sensing. This EASY Plug SR01 Ultrasonic integrates ultrasonic transmitter, receiver and corresponding control circuit. It uses upgraded N76E003AT20 solution. The module comes with four fixed holes, so that can easily fix it on...- €12,00 EUR
€12,00 EUR- €12,00 EUR
- Unit price
- per
-
EASY PLUG Thin-film Pressure Sensor - OpenELAB
This EASY plug pressure sensor adopts the flexible Nano pressure-sensitive material with an ultra-thin film pad. It has the functions of water-proof and pressure detection. When the sensor detects the outside pressure, the resistance of sensor will make a change. So we can use...- €10,85 EUR
€10,85 EUR- €10,85 EUR
- Unit price
- per
-
EASY PLUG TEMT6000 Ambient Light Sensor - OpenELAB
Light sensors are probably one of the most common sensors in life. They can be found in your laptop, phone or home lighting system. A light sensor measures the level of light in a room or ambient light in a space. This EASY plug...- €11,00 EUR
€11,00 EUR- €11,00 EUR
- Unit price
- per
-
EASY PLUG Vibration Sensor module - OpenELAB
What's the simplest way to check vibration with Arduino? Well, use a vibration sensor.You can directly connect it to our EASY Plug control board with only one cable. Just vibrate this sensor, Arduino can receive a digital signal. It is easy to count and...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
EASY PLUG RJ11 Water Level Sensor Module - OpenELAB
This sensor is easy-to-use, portable and particularly designed to identify and detect water level and water drop.It can measure the volume of water drop and water quantity through an array of traces of exposed parallel line.This sensor is small and equipped with the following...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 Steam Sensor module - OpenELAB
EASY plug Steam Sensor needs to be used with the EASY plug Control board V2.0control board.The module is connected to the analog input interface with only one line, which is very easy and convenient. Vapor Sensor is an analog sensor and can make a...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
EASY PLUG RJ11 Soil humidity Sensor - OpenELAB
The EASY Plug soil moisture sensor can read the amount of moisture present in the soil surrounding it. It's an ideal for monitoring an urban garden, or your pet plant's water level.This soil moisture sensor uses the two probes to pass current through the...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 PIR Motion Sensor - OpenELAB
PIR stands for Pyroelectric Infrared (many times, they are also referred as Passive Infrared sensors). This is because their principle of operation is based on the detection of infrared energy emitted by a moving body.The PIR sensor can detect infrared signals from a moving...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
EASY PLUG RJ11 Photoresistor Sensor Module - OpenELAB
A photoresistor or light-dependent resistor (LDR) or photocell is a light-controlled variable resistor. The principal is very simple. The resistance of photoresistor varies with incident light intensity. If the incident light intensity is high, the resistance decreases; if the light intensity is low, the...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 Line Tracking Sensor Module - OpenELAB
The Line Tracking Sensor can tell white from in black or black from white accurately.The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line.The working principle is simple, using infrared light's different reflectivity for different color,...- €12,00 EUR
€12,00 EUR- €12,00 EUR
- Unit price
- per
-
EASY PLUG RJ11 Knock Sensor - OpenELAB
The knock sensor is mainly composed of SW-280 vibration switch, which is an inductive proximity switch.It is an electronic switch that transmits the sensing result to the circuit device and induces the circuit to start working when the vibration force is induced.The module comes...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 Hall Magnetic Sensor - OpenELAB
The Hall sensor is based on Hall Effect. It can detect whether there is a magnetic object nearby or not. And it correctly tells you through digital output.This sensor uses the SFE Reed Switch - Magnetic Field Sensor. It can sense the magnetic materials...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 Flame Sensor - OpenELAB
The flame sensor can be used to detect fire or other wavelength at 760nm ~1100nm light.In the fire-fighting robot game, the flame plays an important role in the probe, which can be used as the robot's eyes to find fire source.The potentiometer on the...- €8,50 EUR
€8,50 EUR- €8,50 EUR
- Unit price
- per
-
EASY PLUG RJ11 DS18B20 Temperature Sensor - OpenELAB
The DS18B20 temperature sensor is exactly what it sounds like - a sensor used to measure ambient temperature.The usable temperature ranges from -55°C to +125°C. It also supports multi-point mesh networking. While there are many types of temperature sensors available in the market, the...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
EASY PLUG RJ11 DHT11 Temp-Humidity Sensor Module - OpenELAB
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor.It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and provides a pre-calibrated digital signal output.This DHT11 sensor has fast response, anti-interference ability, excellent reliability and long term...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
EASY PLUG RJ11 Collision Crash Sensor - OpenELAB
Crash sensor, also known as a snap-action switch, is an electric switch that is actuated by very little physical force.It is a digital on-off input module necessary for elementary electronics.By programming, it can be used for the light, sound device, key functions of LCD...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 Capacitive Touch Sensor - OpenELAB
You can find touch sensors mostly on electronic device. Instead of buttons, upgrade your Arduino project with our new version touch sensor and make it cool!The EASY Plug digital capacitive touch sensor provides a one-touch style switch on your Arduino project. It uses the most...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 Analog Temperature Sensor - OpenELAB
Are you still looking for a low-cost thermometer? Did you get one? Aha! Here it is! This EASY Plug analog temperature sensor is based on a thermistor. The resistance varies with surrounding temperature change.It can measure temperature change in the surroundings and send the data...- €7,99 EUR
€7,99 EUR- €7,99 EUR
- Unit price
- per
-
EASY PLUG RJ11 Analog Sound Sensor - OpenELAB
This sound sensor is typically used in detecting the loudness in ambient environment.You can use it to make interactive circuits such as a voice-operated switch.The sound sensitivity can be adjusted by the potentiometer. The sensor comes with a fixed hole, easy for fixation on...- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
-
EASY PLUG RJ11 Analog Rotation Sensor - OpenELAB
The sensor is based on a potentiometer. A potentiometer is also known as a variable resistor. It is a perfect demonstration of a variable voltage divider circuit. Its voltage can be subdivided into 1023, easy to be connected to Arduino with our sensor shield.Combined...- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
-
EASY PLUG RJ11 Analog Alcohol Ethanol Sensor - OpenELAB
This analog gas sensor - MQ3 is suitable for detecting alcohol. It can be used in a Breath analyzer. Also it has high sensitivity to alcohol and low sensitivity to Benzine.The sensitivity can be adjusted by a blue potentiometer on the sensor.This module should...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
EASY PLUG RGB TCS34725 Color Sensor Module I2C - OpenELAB
The RGB color mode is a color standard in the industry, which is obtained by changing the three color channels of red (R), green (G), and blue (B) and superimposing them on each other. RGB represents three channels of red, green and blue. This...- €12,00 EUR
€12,00 EUR- €12,00 EUR
- Unit price
- per
-
EASY PLUG MQ-135 Air Quality Sensor Gas Detection Module - OpenELAB
MQ135 sensor uses SnO2 sensitive material because SnO2 has low electrical conductivity in the clean air. When surrounded by polluted air, the electrical conductivity of MQ135 sensor will increase with the increase of pollutants, and the change in electrical conductivity can be converted to corresponding output signal.You can rotate the potentiometer...- €9,99 EUR
€9,99 EUR- €9,99 EUR
- Unit price
- per
-
EASY PLUG IIC Interface Conversion Shield - OpenELAB
This is an EASY plug IIC interface conversion shield, compatible with both EASY plug interface and 2.54mm pitch header interface. When the MCU communicates with other sensor modules, I2C communication mode is required, and I2C communication can be performed simultaneously with multiple sensor modules...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
EASY PLUG Infrared Obstacle Avoidance Sensor Module - OpenELAB
Infrared obstacle avoidance sensor is equipped with distance adjustment function and is especially designed for wheeled robots.This sensor has strong adaptability to ambient light and is of high precision. It has a pair of infrared transmitting and receiving tube.When infrared ray launched by the...- €12,00 EUR
€12,00 EUR- €12,00 EUR
- Unit price
- per
-
EASY PLUG GP2Y1014AU PM2.5 Dust Sensor - OpenELAB
EASY plug GP2Y1014AU PM2.5 Dust sensor is particularly effective in detecting very fine particles, such as cigarette smoke, and is commonly used in air purifier system. In the device, an infrared light emitting diode and a phototransistor are diagonally arranged to allow it to...- €18,00 EUR
€18,00 EUR- €18,00 EUR
- Unit price
- per
-
EASY PLUG DHT22 Temperature and Humidity Sensor - OpenELAB
This EASY plug DHT22 digital temperature and humidity sensor is a composite Sensor which contains a calibrated digital signal output of the temperature and humidity. The dedicated digital modules collection technology and the temperature and humidity sensing technology are applied to ensure that the...- €19,90 EUR
€19,90 EUR- €19,90 EUR
- Unit price
- per
-
EASY PLUG CCS811 CO2 Air Quality Sensor - OpenELAB
EASY plug CCS811 CO2 air quality sensor can work with EASY plug control board V2.0, by connecting it to the I2C communication port with a cable. This sensor adopts the CCS811 chip, a ultra-low consumption digital air sensor, which can detect a variety of...- €25,00 EUR
€25,00 EUR- €25,00 EUR
- Unit price
- per
