AVADA - Best Sellers
-
MAX7219 8x32 4 in 1 Dot Matrix LED Display ModuleHighly scalable from a single 64-LED panel to a small LED wall, the bright red modules are suitable for displays with long-distance effects.The LED matrix with 256 LEDs consumes a maximum of only 160 mA, so that it can be conveniently operated without an...
- From €11,49 EUR
€11,49 EUR- From €11,49 EUR
- Unit price
- per
Save €0,00 -
Soil Moisture Sensor Hygrometer Module V1.2 capacitiveThe Capacitive Soil Moisture Sensor Hygrometer Module V1.2 is the successor model of our soil moisture sensor module (hygrometer). Unlike the normal module, this sensor does not have an adjustable switching contact, it works analog and thus displays the exact moisture values in real...
- From €4,49 EUR
€4,49 EUR- From €4,49 EUR
- Unit price
- per
Save €0,00 -
D1 Mini V3 Nodemcu with ESP8266-12F WLAN moduleThe D1 Mini V3.0 is a so-called "physical computing platform" similar to the modules of the well-known Arduino family. The module consists of two components, a USB to serial converter (CH340C) and a microcontroller with highly integrated TCP/IP stack (ESP8266EX). The latest version of...
- From €2,90 EUR
€2,90 EUR- From €2,90 EUR
- Unit price
- per
Save €0,00 -
38KHz Infrared Transimitting and Receiver ModuleIR Receiver Adopt 1838 remote control receiver with high sensitivity Working voltage 5V output type: digital outputs There are 2 fixing holes for easy installation. Aperture 3.1mm with date indicator Wiring instructions DAT digital output interface VCC 5V DC power supply positive...
- €0,29 EUR
€0,29 EUR- €0,29 EUR
- Unit price
- per
Save €0,00 -
NodeMCU Lua Amica Module V2 ESP8266 ESP-12F WIFIThe NodeMCU Amica V2 is a quintessential ESP developer board. Designed to be breadboard-friendly and featuring the robust ESP8266-12F processor from Espressif with integrated WLAN, this controller provides an accessible entry point into IoT development. Firmware Flexibility: Multiple firmware versions from the manufacturer can...
- From €6,99 EUR
€6,99 EUR- From €6,99 EUR
- Unit price
- per
Save €0,00 -
2-Channel 5V Relay Module2 relay module consists of two LEDs, four resistors, two NPN transistors, two rectifier diodes and two relays that can handle up to 5A 50V AC. Relays are widely used in remote control, communication, mechatronics, power electronics, etc. They can also be used to...
- From €4,99 EUR
€4,99 EUR- From €4,99 EUR
- Unit price
- per
Save €0,00 -
Breadboard Kit - 3x Jumper Wire + 3 Sets MB102WHAT DO YOU NEED FOR EVERY SMART HOME OR MICROELECTRONICS PROJECT? Of course, jumper wire cables, as well as breadboards. And quite a lot of them. For this purpose, we offer you the Jumper Wire cable set with 120 jumper cables of 20...
- From €9,49 EUR
€9,49 EUR- From €9,49 EUR
- Unit price
- per
Save €0,00 -
ESP8266 ESP-01S WiFi moduleESP8266 ESP-01S WLAN WiFi module is designed with high quality materials, it is small, convenient and powerful, making it suitable for small or large projects.The best thing about ESP8266 is that it gives you WLAN communication, so you can use it to connect to...
- From €1,50 EUR
€1,50 EUR- From €1,50 EUR
- Unit price
- per
Save €0,00 -
Digispark Rev.3 Kickstarter with Attiny85 and USBThe Digispark is probably the most compact and smallest microcontroller currently available. The Digispark with ATTiny85 has a USB connector directly on board and can be connected directly to a USB port without any additional cable. The integrated ATTiny85 is powered directly via the...
- From €5,99 EUR
€5,99 EUR- From €5,99 EUR
- Unit price
- per
Save €0,00 -
Motion Sensor Motion Detection Module HC-SR501 PIRThe motion detector module is based on infrared technology, automatic control module and LHI778 probe design.This ensures high sensitivity, high reliability and ultra-low voltage operation mode.It is widely used in various electric auto-sensing devices, especially battery-operated auto-controlled products.The module is also equipped with a...
- From €6,49 EUR
€6,49 EUR- From €6,49 EUR
- Unit price
- per
Save €0,00 -
65pcs Jumper Wire Cable Jumpers for Breadboard, PlugboardCheap jumper wire with plug: "Male to Male".Length of the cables: 25cm/20cm/16cm/12cm65pcs.Suitable for all breadboards
- From €3,79 EUR
€3,79 EUR- From €3,79 EUR
- Unit price
- per
Save €0,00 -
ELAB-Nano V3-Board CH340ELAB-Nano V3-Board with Atmega328P CH340G board with ready soldered improved version with USB cable is ideal for mobile projects. Get started with microcontroller development with this efficient module! The small board is perfect for getting started, and with the integrated USB interface, play the...
- From €3,20 EUR
€3,20 EUR- From €3,20 EUR
- Unit price
- per
Save €0,00 -
MB-102 Breadboard Pug with 830 contacts compatibleEasy to use: Our solderless breadboards are ideal for your prototyping, circuit design experiments and other DIY projects. Each row and column has corresponding letters and numbers, making it easy to use and preventing mistakes.Convenient and Reusable: The self-adhesive back tape makes it easy...
- From €5,49 EUR
€5,49 EUR- From €5,49 EUR
- Unit price
- per
Save €0,00 -
SPI Reader Micro Memory SD TF Card Memory Card Shield ModuleOne SPI reader is a kind of modulethat enables communication between a microcontroller and a memory card, such as an SD or TF card. The module uses the SPI (Serial Peripheral Interface) protocol to transfer data between the two devices. The SD/TF card shield...
- From €3,79 EUR
€3,79 EUR- From €3,79 EUR
- Unit price
- per
Save €0,00 -
TP4056 Mini USB 5V 1A Charge ControllerThe TP4056 is a miniature USB lithium-ion battery charging module commonly used to charge small batteries found in mobile devices, drones and other portable electronics. The module is based on the TP4056 IC (Integrated Circuit) and has a built-in microcontroller that monitors the charging...
- From €2,79 EUR
- From €2,79 EUR
- Unit price
- per
-
LED Ring 5V RGB WS2812B 12-Bit 50mmOur RGB-Led-Ring with 12 LEDs impresses with its high luminosity at low power consumption. The used WS2812b are individually addressable, need only one data line and can display a large color space.Due to the twelve LEDs, the module is well suited to implement clocks...
- From €5,99 EUR
€5,99 EUR- From €5,99 EUR
- Unit price
- per
Save €0,00 -
2 pieces DFPlayer Mini 3 Watt 8 Ohm Mini loudspeakersProduct Information Model: YZ-3370 Impedance: 8Ω Dimensions: 33*70*16MM Product Type: Speaker for advertising machine and smart home applications Specifications Item Specification Type Built-in Speaker 3370-8Ω Mylar Thickness — Magnet 12.5 * 7.5 mm Voice Coil PLT3.28 * 7.6 * 16 Nominal Impedance 7.5Ω...
- €2,20 EUR
€2,20 EUR- €2,20 EUR
- Unit price
- per
Save €0,00 -
U 64 LED Matrix Panel CJMCU-8x8 ModuleThe 64-LED matrix consists of luminous RGB LEDs of eight per row and column. The WS2812 diodes are individually addressable and can be programmed via a single data line. For microcontrollers like Raspberry Pi corresponding libraries are freely available. Please note to supply the...
- From €9,49 EUR
€9,49 EUR- From €9,49 EUR
- Unit price
- per
Save €0,00 -
Dual Axis Gaming Joystick MoudleThis is game joystick module for Arduino.Lots of robot projects need joystick. This module provides an affordable solution to that.Simply connect to two analog inputs, the robot is at your commands with X, Y control. It also has a switch that is connected to...
- €0,99 EUR
€0,99 EUR- €0,99 EUR
- Unit price
- per
Save €0,00 -
Potentiometer ModuleMaterial: Electronic components + PCBSize: About 31 * 19 * 29mm / 1.22" * 0.75" * 1.14"Main color: BlackWorking voltage: 5VPulse circle: 20By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the outputpulse frequency,...
- €1,90 EUR
€1,90 EUR- €1,90 EUR
- Unit price
- per
Save €0,00 -
Vibration SensorThe vibration module is also called the vibration switch. When we tap the module or shake the module, it will detect the vibration and the K1 pin will output a voltage difference. The module possess 4 alligator clip interfaces VCC, GND, K1, NC, which...
- €2,49 EUR
€2,49 EUR- €2,49 EUR
- Unit price
- per
Save €0,00 -
Passive Buzzer ModuleProduct Description100% Brand new and high qualityBrand new compatible passive speaker buzzer moduleFeatures control the buzzer soundsCompatible and mini designMade of PCB materialDIY partsColor: black
- €2,49 EUR
€2,49 EUR- €2,49 EUR
- Unit price
- per
Save €0,00 -
Active Buzzer ModuleTwo module interface description (3-wire system) VCC is externally connected with 3.3V-5V voltage (it can be directly connected with 5v single-chip microcomputer and 3.3v single-chip microcomputer) GND external GND 3 I/O is connected to the IO port of the single chip computer module is...
- €2,49 EUR
€2,49 EUR- €2,49 EUR
- Unit price
- per
Save €0,00 -
VL53L0X Time-of-Flight (TOF) Laser distance sensorThe M5StickC PLUS is a miniature development board based on the ESP32-PICO-D4 chip with a compact and powerful design. It integrates a wide range of sensors and modules and is ideal for rapid prototyping and developing Internet of Things (IoT) applications.Click on the link...
- From €6,99 EUR
€6,99 EUR- From €6,99 EUR
- Unit price
- per
Save €0,00 -
ESP8266-01S ESP-01S WiFi module 5V with relay adapterWith the ESP8266-01S relay module you have the possibility to switch a relay comfortably via WLAN. With the help of free firmware, the module can be integrated into existing networks, without any programming knowledge! The powerful ESP-01S with 1 MB memory and 80 MHz...
- From €2,90 EUR
€2,90 EUR- From €2,90 EUR
- Unit price
- per
Save €0,00 -
Current Sensor ACS712ELC-20A1. Current sensor: ACS712ELC-20A;2. Pin 5V power supply, onboard power indicator; 3. The module can measure plus or minus 20 amps, corresponding to the analog output of 100mV/A; 4. No test current passing through the output voltage is VCC/2.
- €4,19 EUR
€4,19 EUR- €4,19 EUR
- Unit price
- per
Save €0,00 -
NRF24L01 with 2.4 GHz Wireless ModuleThe NRF24L01 is a 2.4 GHz wireless transceiver module that can be used with the ESP8266 and Raspberry Pi microcontroller boards. It enables wireless communication between multiple devices and can be used for a variety of applications such as home automation, wireless sensor networks,...
- From €5,99 EUR
€5,99 EUR- From €5,99 EUR
- Unit price
- per
Save €0,00 -
LM2596S Step-down DC-DC Buck ConverterLM2596S Buck Converter with 3 Digits Display Step-Down DC-DC Converter 4-40V to 3.3-24V The display is especially useful for adjusting the output voltage. While you adjust the voltage on the trimmer, you can follow the changes on the display. Thus a very precise tuning...
- From €7,99 EUR
€7,99 EUR- From €7,99 EUR
- Unit price
- per
Save €0,00 -
SIM7028 NB-IoT HATProduct descriptionsSupports Global Band NB-IoT Communication, Small In Size, Low Power ConsumptionFeatures At A GlanceThe SIM7028 NB-IoT HAT is a small size, low-power, and powerful Raspberry Pi HAT with NB-IoT (Narrow-Band Internet of Things) function, supports global band and supports TCP, UDP, LWM2M, COAP, DTLS, DNS,...
- €15,99 EUR
€15,99 EUR- €15,99 EUR
- Unit price
- per
Save €0,00 -
HD44780 1602 LCD Module DisplayThe high contrast I2C display allows the display of 16x2 characters in white font on blue background. Thanks to I2C to Serial Converter the display can be operated with only two data pins on the board. The I2C-FC113 adapter allows you to reduce the cabling...
- From €5,49 EUR
€5,49 EUR- From €5,49 EUR
- Unit price
- per
Save €0,00 -
1-channel Relay 5V KY-019 Module High-Level-TriggerOur relay modules quickly and reliably switch many switching operations.The KY-019 relay module is used to control AC circuits and switches them ON or OFF.The relay is one of the most important control elements. It is an electrical switch that responds to a signal...
- From €3,49 EUR
€3,49 EUR- From €3,49 EUR
- Unit price
- per
Save €0,00 -
Shock Sensor ModuleApplication use: Used for various vibration triggering functions, reporting burglary alarms, smart cars, electronic building blocks, etc. Module features: 1. Adopting various sensitivity vibration switches produced, the SW-18015P vibration sensor is used by default.2, the comparator output, the signal is clean, the waveform is...
- €2,49 EUR
€2,49 EUR- €2,49 EUR
- Unit price
- per
Save €0,00 -
Camera for Raspberry PiOur high quality Raspberry Pi camera with 5 mega pixel HD camera and high resolution allows you to capture clear images for any type of project. The camera features the same characteristics and ensures the same performance as the original.The included cable is about...
- From €8,49 EUR
€8,49 EUR- From €8,49 EUR
- Unit price
- per
Save €0,00 -
Ultrasonic Distance Sensor Compatible HC-SR04The HC-SR04 Ultrasonic Module is a rangefinder that can be used to measure the distance to an object. It is often used with the Raspberry Pi as it is easy to connect and can take accurate measurements over a wide range of distances. ...
- €1,29 EUR
€1,29 EUR- €1,29 EUR
- Unit price
- per
Save €0,00 -
DHT22 AM2302 Temperature sensor and air humidity sensorThe DHT22/AM2302 is a low cost, reliable digital temperature and humidity sensor and the successor of the widely used DHT11. This module is suitable for both 5V and 3.3V microcontrollers. Particularities Using capacitive moisture sensor and hot conductor, the sensor measures surrounding air data...
- From €8,99 EUR
€8,99 EUR- From €8,99 EUR
- Unit price
- per
Save €0,00 -
DHT11 Temperature-Humidity SensorThis is a calibrated digital temperature and humidity module with onboard sensor DHT11. It can be used for detecting ambient temperature and humidity, through the standard single-wire interface. Specifications Temperature Resolution : 1°C Accuracy : ±2℃ Measuring range : 0°C ~ 50°C Humidity Resolution...
- €1,50 EUR
€1,50 EUR- €1,50 EUR
- Unit price
- per
Save €0,00 -
HW-140 DC-DC Buck Boost Converter Step Up/Down, LCD displayHW-140 DC-DC Buck Boost Converter Step Up/Down The HW-140 power supply module is a multi-functional product that displays the input and output voltage, current or power in real time, switching via the IN/OUT buttons.The ON/OFF button is used to turn off the display or...
- From €10,99 EUR
€10,99 EUR- From €10,99 EUR
- Unit price
- per
Save €0,00 -
Logic Level Converter TXS0108E 8 ChannelThe 8 channel logic level converter TXS0108E is a device that allows communication between devices that work with different voltage levels. With the AZ Delivery TXS0108E logic level converter, you can drive 3.3V modules to a 5V microcontroller, or conversely 5V modules to a...
- From €3,99 EUR
€3,99 EUR- From €3,99 EUR
- Unit price
- per
Save €0,00 -
Thermistor ModuleFeatures:1. Using the NTC thermistor sensor , good sensitivity2. The comparator output signal clean waveform is good , driving ability, than 15mA.3. Adjust the temperature distribution bit detection threshold4. Working voltage 3.3V-5V5. The output format : Digital switching output (0 and 1)6. With bolt...
- €0,35 EUR
€0,35 EUR- €0,35 EUR
- Unit price
- per
Save €0,00 -
USB Charger Doctor Current MultimeterOne USB Charger Doctor Multimeter, also known as USB power meter, is a device that can measure the voltage, current and power consumption of a USB device. It can be plugged between a USB device and a USB power source, such as a...
- From €4,99 EUR
€4,99 EUR- From €4,99 EUR
- Unit price
- per
Save €0,00 -
5V/12V 1 Channel Relay Optocoupler High/Low Level Trigger ModuleLight threshold can be adjusted by potentiometer to set the relay start Input: 5V/12V DC Load capacity: 10A / AC 250V or DC up to 30V RED LED ON: Indicate the Power ON BLUE LED ON: Relay is working Module output terminal has three...
- €3,99 EUR
€3,99 EUR- €3,99 EUR
- Unit price
- per
Save €0,00 -
HD44780 2004 LCD Display Bundle 4x20 CharactersThis AZ delivery display is a 2004 4-line, 20-digit alphanumeric LCD with HD44780 display controller and a standard 4/8-bit parallel interface. Particularities Thanks to the 8 selectable I2C addresses, 6 displays can be operated simultaneously. With the included jumper and potentiometer you can...
- From €10,99 EUR
€10,99 EUR- From €10,99 EUR
- Unit price
- per
Save €0,00 -
ADS1115 ADC Module 16Bit 4 channels for Raspberry PiOur ADS1115 is an analog to digital converter with 16 bit resolution and I2C interface for easy control of up to 4 analog channels. So you can finally operate and evaluate analog sensors on your Raspberry or ESP8266 and ESP32. Due to the wide...
- From €6,49 EUR
€6,49 EUR- From €6,49 EUR
- Unit price
- per
Save €0,00 -
Ultrasonic SensorThe module features: 1: Working voltage: DC5V 2: Quiescent current: less than 2mA 3: Level output: DC3.3-5V 4: Level output: Bottom 0V 5: Sensing angle: not more than 15 degrees 6: Detection range: 2cm-450cm 7: High precision: up to 0.3cm
- €0,99 EUR
€0,99 EUR- €0,99 EUR
- Unit price
- per
Save €0,00 -
1.77 inch Spi TFT Display and 128x160 PixelsLeave the computer out and get your data from the Raspberry Pi and other microcontrollers directly via the TFT display with 1.77 inch screen diagonal and 128x160 pixel resolution.The matte surface and the bright, yet energy-efficient backlight (max. 40 mA with LEDA at 3.3...
- From €8,49 EUR
€8,49 EUR- From €8,49 EUR
- Unit price
- per
Save €0,00 -
8*8 Matrix LED Display ModuleProduct descriptions Single color bi-color 1.9mm 8x8 dot matrix small 8*8 led display 1.9mm 8x8 LED dot matrix display Electro/Optical Characteristics If=20mA Ta=25 C JSD-7881AUR JSD-7881BUR AlGaInP/GaAs Super red 630 2.0 2.5 10 20 JSD-7881AUE JSD-7881BUE AlGaInP/GaAs Ultra 625 2.0 2.5 40 80...
- €3,49 EUR
€3,49 EUR- €3,49 EUR
- Unit price
- per
Save €0,00 -
ESP8266 ESP-01S with USB adapter Wlan WiFi moduleSet consisting of one ESP8266-01S and one USB adapter! Large range through Wlan 802.11 b/g/n standard! Universal use thanks to three available operating modes: Wlan Router (AP), Wlan Client (STA) and both at the same time (AP + STA)! Thanks to powerful 80MHz processor...
- From €5,99 EUR
€5,99 EUR- From €5,99 EUR
- Unit price
- per
Save €0,00 -
GY-521 MPU-6050 3-axis gyroscope and acceleration sensorThe compact GY-521 module is based on the MPU-6050 NEMS chip, and combines a 3-axis gyroscope and a 3-axis accelerometer with a digital motion processor (DMP) and a temperature sensor.The sensor data is read out via the I²C bus, therefore you only need 2...
- From €7,99 EUR
€7,99 EUR- From €7,99 EUR
- Unit price
- per
Save €0,00 -
A4988 Stepper Motor Driver ModuleReady soldered stepper motor with multiple applications e.g. at your makerbot duo clone or also at the microcontroller. Directly with heat sink ex works, therefore no overheating of the product.✔️ Ideal for controlling your stepper motors for 3D printers or CNC machines e.g. via...
- From €5,49 EUR
€5,49 EUR- From €5,49 EUR
- Unit price
- per
Save €0,00 -
DS18B20 digital temperature sensorThe DS18B20 Temperature Sensor is a digital temperature sensor that provides 9- to 12-bit digital temperature measurements and has an alarm function with non-volatile, user-programmable upper and lower trigger points.Communication between sensor and microcontroller:The DS18B20 sensor communicates via a bus that requires only one...
- From €3,29 EUR
€3,29 EUR- From €3,29 EUR
- Unit price
- per
Save €0,00
