Smart 6WD Robot Car Chassis Shock Absorption Kit

Introduction

6WD mobile platform can be installed on various types of control boards or controllers, such as raspberry pie. On the chassis with a 3mm mounting hole, horizontal 12mm, vertical 14mm hole spacing can be very different aspects of the installation of a variety of sensors, or additional expansion of other functions, such as the installation of a robot. The upper floor reserved for platform, raspberry platform installation hole.

 
Feature

• Damping soft and hard adjustable, through the extension spring.
• The road surface is uneven, shock absorption access will be adaptive to the road.
• 12 flange bearings are used in the link to reduce frictional resistance.
• Powerful expansion capabilities, you can arbitrarily modified.

Parameters

Vehicle size: 28 * 21 * 11.5cm

Vehicle quality: 1.4kg

Maximum load: 6kg

Operating voltage: 12V

Rated current: 350mA * 6

Engine original speed: 17000rpm

Output shaft speed: 500rpm

Rated torque: 5kg/cm

Shipping list

• Upper Plate * 1
• Lower Plate * 1
• Motor Fixing Plate * 6
• U-shaped Fixing Plate * 3
• U-shaped Shock Absorber Fixing Seat * 3
• Shock Absorber * 6
• Motor * 6 (GA25-370)
• Rubber Tire * 6 (72mm)
• Copper Column * 6 (17-4mm)
• Countersunk Head Screw * 8 (M3*30mm)
• Nylon Standoff * 12 (MR8327, 1/4 3/8)
• Round Head Screw * 8 (M2.5*14mm)
• Round Head Screw * 8 (M2.5*16mm)
• Hex Socket Head Cap Screw * 13 (M3*5mm)
• Round Head Screw * 55 (M3*10mm)
• Hex Nut * 15 (M2.5)
• Hex Nut * 26 (M3)
• Silicone Wire * 1500cm (20AWG)
• Micro Switch
• Phillips Screwdriver * 1