Products

Note: All products are tax-inclusive. LAN Base is an Ethernet controller base, built-in W5500 full hardware TCP/IP embedded Ethernet controller (SPI communication interface), supports multiple communication protocols (TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE, etc.) and integrated storage buffer area to facilitate Ethernet data packet processing....

The ECL-132 Remote-Controlled Clock consists of 336 components and accessories, including 132 5mm LEDs as display elements. Each 8-segment digit measures 81mm in height and 43mm in width, with the entire display screen sized at 229 x 89mm. The clock features a black transparent...

Note: All products are tax-inclusive. LASER.RX Unit is a laser receiver unit primarily composed of laser diodes. Laser communication devices establish wireless connections through the atmosphere. While the transmission of laser beams occurs through free space, their operation is similar to fiber optic links. Although...

Note: All products are tax-inclusive. LASER.TX is one of the communication devices among the M5Units family - a Laser emitter with adjustable focal length. It is mainly built with a laser diode Laser communications devices are wireless connections through the atmosphere. They work similarly to...

1602 LCD Display Features Model 1602A1 Model size 80(L)x36(W)x12(H)mm View Area 6800 8-bit/4-bit Parallel View Direction 6 O'clock LCD Mode STN(Blue/yellow-green)、FSTN（Gray) Operating voltage 5V/3.3V Driver IC SPLC780D or Equivalent Net weight（g） 50 Driving Method 1/16 DUTY,1/5 BIAS Number of character 16 characters x 2...

Note: All products are tax-inclusive. LCD Unit is a 1.14-inch color LCD expansion screen unit designed for displaying simple content as a display panel. It features a resolution of 135x240 pixels and utilizes the ST7789V2 drive scheme. The LCD Unit supports RGB666 display, allowing for...

An LED, or Light Emitting Diode, is made from a compound mixture of elements such as gallium (Ga), arsenic (As), and phosphorus (P). Gallium phosphide diodes emit red light, gallium phosphide diodes emit green light, and silicon carbide diodes emit yellow light. The reverse...

Our RGB-Led-Ring with 12 LEDs impresses with its high luminosity at low power consumption. The used WS2812b are individually addressable, need only one data line and can display a large color space.Due to the twelve LEDs, the module is well suited to implement clocks...

The LED water light module does not require additional wiring, it is plug-and-play and can be directly plugged into the digital port of Arduino UNO. It can monitor the status of the digital port at all times, which is convenient for Arduino digital port...

Note: All products are tax-inclusive. LIGHT Unit is a light intensity detection sensor that integrates a photoresistor and a 10K adjustable resistor. It is capable of detecting light intensity and setting a threshold value for light intensity. The resistance of the photoresistor decreases as the...

The OPS-1 Light-Controlled Switch supports two trigger modes and two output modes: 1. Trigger Modes (Configured with JMP1 Jumper Caps): Bright Trigger Mode (Jumper Cap on 1-3 Position):The relay is activated when the photoresistor detects light increasing from dark to bright or gradually strengthening....

The LILYGO Paxcounter Disaster-Radio LoRa V2.1_1.6.1 ESP32 is a versatile, high-performance module designed for a wide range of IoT applications, including passenger flow metering, disaster communication, and environmental monitoring. Powered by the ESP32 microcontroller, this module supports LoRa communication at frequencies of 433MHz, 868MHz,...

T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication...

Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino.   Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series   Specifications...

Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino.   Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series   Specifications...

Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino.   Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series   Specifications...

Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino.   Sample Code For Reference [Github] If you need technical support please check the below link to find more details. Meshtastic Firmware LILYGO Lora Series   Specifications...

T-Deck is a pocket-sized gadget with a 2.8-inch, 320 x 240 pixel IPS LCD display, a mini keyboard, and an ESP32 dual-core processor. While it's not exactly a smartphone, you can use your programming knowledge to turn it into a standalone messaging device, or...

Specifications MCU  ESP32 Xtensa dual-core LX6 microprocessor Wireless Connectivity  Wi-Fi 802.11 b/ g/ n, BL V4.2+BLE Programming Platform  Arduino-ide、Micropython Serial chip CH9102 Optional Flash: 4M/16M Onboard functions Buttons: l006+I007, battery power detection   Description For 1.14 inch ST7789V IPS LCD Resolution: 135 x 240...

A basic development board with LCD, and a built-in ESP32 chip as master control, supports daily entry-level programming. For 1.14 inch ST7789V IPS LCD Resolution: 135 x 240 High Density 260 PPI 4-Wire SPI interface Working Power Supply: 3.3V 1.14" diagonal Full-color TFT Display...

T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...

T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...

T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...

T-Display-S3 AMOLED is a display screen module with a 1.91 inch diagonal screen, based on our previous S3 module, we have upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any...

The T-Dongle S3 by LILYGO is a development board based on the ESP32-S3 microcontroller, designed for Internet of Things (IoT) applications. This board is available in two versions: one with a 0.96-inch ST7735 color LCD display and another without a display. Note: With TF Card, but...

LILYGO TTGO T-Echo is a version evolved from LILYGO T-BEAM. At the beginning of the design, more consideration was needed to adapt to Meshtastic. So Bluetooth and low-power consumption were considered when designing, and NRF52840 Advanced  Bluetooth 5 was the selected thread and Zigbee...

LILYGO  TTGO SotfRF T-Echo NRF52840 LoRa SX1262 433/868/915MHz Wireless Module L76K GPS 1.54 E-Paper BME280 Sensor for Arduino. LILYGO TTGO T-Echo is a version evolved from LILYGO T-BEAM. At the beginning of the design, more consideration was to adapting to Meshtastic and SotfRF, so Bluetooth and...

LILYGO TTGO T-Echo is a version evolved from LILYGO T-BEAM. At the beginning of the design, more consideration was needed to adapt to Meshtastic. So Bluetooth and low-power consumption were considered when designing, and NRF52840 Advanced  Bluetooth 5 was the selected thread and Zigbee...

LILYGO TTGO SotfRF T-Echo NRF52840 LoRa SX1262 433/868/915MHz Wireless Module L76K GPS 1.54 E-Paper BME280 Sensor for Arduino. It is a version that evolved from LILYGO T-BEAM. At the beginning of the design, more consideration was needed to adapting to Meshtastic and SotfRF, so Bluetooth and...

Note [For orange button]: Since the edge of the button is orange, the color of the light shown in RGB is recommended to use white light, if the corresponding RGB color cannot be displayed, please purchase carefully.  T-Embed is an IoT-embedded panel designed for programmable development....

Specification MCU  ESP32-S3FN4R2 Xtensa LX7 microprocessor Wireless Connectivity Wi-Fi 802.11 b/g/n, BL V5.0+BLE Programming Platform Arduino-ide, Micropython Flash 4M PSRAM 2M Clock frequency 240Mhz Onboard functions IO00+IO47 Battery Detection IO04    LCD: GC9107 TFT IPS LCD LCD  Resolution: 128*128px Support 4-Wire SPI interface Display Area...

T-RGB is the first circular touch display screen of LilyGo. The screen uses a 2.1/2.8inch ST7701S TFT LCD full-color display. The main control chip adopts ESP32-S3R8 Tensilica Xtensa Dual-Core LX7 Microprocessor, this chip supports Wi-Fi 802.11 b/g/n and Bluetooth 5.   For half circle and full circle...

T-SIM7600G-H R2 / T-SIM7600E-H Introduce T-SIM7600 is a wireless networking module with WIFI/Bluetooth/4G LTE CAT4 GPS. T-SIM7600X-H is ten times faster than T-SIM7600X's Download link (DL) and Upload Link (UL); LTE (Mbps) is optimized from 10(DL)/5(UL) to 150(DL)/ 50(UL) On this basis, we integrate a...

T-Watch S3 meets the needs of developers who want to experiment with LoRa and ESP32 S3 technology in wearable devices, highly customizable and usable in a variety of applications. Specifications MCU ESP32-S3 FLASH 16MB PS RAM 8MB Platform Arduino-IDE, ESP-IDF, VS Code, Micropython Wireless Wi-Fi: 802.11...

note: Due to the problem of the characteristics of the ink screen, it cannot be partially refreshed for a long time, otherwise, it will leave residual images and lead to irreversible damage. Specifications MCU ESP32-S3-WROOM-1-N16R8 Wireless Connectivity Wi-fi Bluetooth V5.0 Programming Environment Arduino-ide VS Code Onboard...

Features Supports Intel 12th/13th Gen Alder Lake/Raptor Lake U/P/H i3/i5/i7 CPUs Dual-channel 2*SO-DIMM DDR4 3200MHz memory, up to 32GB I/O side display output: HDMI 2.0 + DP1.4, supports 4K 60Hz OPS side display output: HDMI 2.0, supports 4K 60Hz Onboard 1*1000M RJ45, with optional...

Default Version: NANO-N100 1C2L/DDR5 16GB/512GB/WIFI6/Power12V3A Features Support intel®Alder Lake-N(N305/N100) Processor Support SO-DIMM，DDR5 4800MHz，Max16GB Support 2*HDMI+VGA, support Triple Display Onboard 2*RTL8111H 1000M Support 2*USB3.2 Gen2(10Gbps), 1*Type-C,4*USB2.0; Support 1*MicroSD, 1*SIM; 1*COM RS232; 1*M.2 M Key, support SATA/NVME; 1*M.2 E Key, support Wifi6+Bluetooth/4G Module; 1*M.2 B Key,...

Default Version: NUC-ADLN01/DDR4 8GB/256GB SSD/3165.NGW/Power12V3A   Features Support for Intel Alder Lake-N (N305/N100/N97 / N97 / N95) Processor Support for single-channel SO-DIMM, DDR4 3200MHz, Max16GB Support DP + HDMI + Type-C display output, triple-display asynchrony Onboard 2 * Intel i226 network card (rate 2.5G) Support 2*USB3.0 Gen1...

Default Version: NANO-12450H-2L/DDR4 16G/512G/WIFI6/Power19V 4.74A Features Supports Intel Alder/Raptor Lake U/P/H Processor(For specific model inquiries, please contact info@openelab.io ) Supports dual-channel SO-DIMM, DDR4 3200MHz Display output: 1*HDMI + 1*DP + 1*Thunderbolt + 1*Type-C, supporting four synchronous and asynchronous displays Optional 2*RTL8111H Gigabit network cards...

The 6.0 laser module has a laser head with a diameter of 0.6mm and positive and negative terminals. It operates at a voltage of 3.3V to 5V. The laser beam forms a faint red line only in fog or other media, while under normal...

 Specifications  Quantity: 1 pcs Technical parameters: Value 10 Model Number: 3S 11.1V 1100-22000mAh For Vehicle Type: Airplanes Tool Supplies: Battery Four-wheel Drive Attributes: Battery Remote Control Peripherals/Devices: Battery Upgrade Parts/Accessories: Lithium Battery RC Parts & Accs: Batteries - LiPo Material: LiPo Cell Brand Name:...

The LCT-1 Liquid Level Controller DIY Kit is an excellent project for enthusiasts, students, and engineers who want to build an efficient water level management system. It provides precise monitoring of water levels with automatic control over water pumps or solenoid valves. This versatile...

Application This module can be used in the step-down field where the input voltage is higher than the output voltage, such as batteries, power transformers, DIY adjustable regulated power supplies, 24V vehicle notebook power supplies, industrial equipment step-down, 12V to 3.3V, 12V to 5V,...

The DC-DC step down power module LM2596S;is a voltage regulator used to convert a higher input voltage to a lower output voltage. It is based on the LM2596S integrated circuit, a switching regulator that can efficiently reduce the voltage while ensuring a stable output....

LM2596S Buck Converter with 3 Digits Display Step-Down DC-DC Converter 4-40V to 3.3-24V The display is especially useful for adjusting the output voltage. While you adjust the voltage on the trimmer, you can follow the changes on the display. Thus a very precise tuning...

The 8 channel logic level converter TXS0108E is a device that allows communication between devices that work with different voltage levels. With the AZ Delivery TXS0108E logic level converter, you can drive 3.3V modules to a 5V microcontroller, or conversely 5V modules to a...

Note: All products are tax-inclusive. The LoRa868_V1.1 Module is a LoRa communication module in the M5Stack stacking module series, operating at a frequency of 868MHz. This module comes standard with an SMA antenna and additionally reserves two patch MCX antenna socket interfaces, allowing users to freely...

Note: All products are tax-inclusive. LoRaWAN470 Unit is a LoRaWAN communication module specifically designed for the 470MHz frequency range. It is developed by M5Stack and provides long-distance communication capabilities using the LoRaWAN protocol.The module utilizes the ASR6501 solution, which offers a combination of ultra-low power...

TIRED OF SHOUTING AND WHISTLING The OpenELAB electric whistle is your best choice. Easy to get attention, loud and consistent sound every time. Electric whistle helps your voice at pause without blowing, but also send louder, stronger and more consistent sound compared to traditional...

The Low Profile Ice Tower is a horizontally designed silver heatsink, complemented by an aluminum alloy base, tailor-made for the Raspberry Pi 5. Featuring a unique combination of a fan, copper pipe heatsink, and aluminum alloy base, it provides an efficient cooling solution for...