Dev Board
-
OpenELAB EASY PLUG 4-Digit LED Display Module
This is a 4-digit 0.36’’ Common Anode LED display module, a 12-pin display module with score points. The driver chip used in the matrices is TM1637, using only two signal cables to make the microcontroller control the 4-digit LED display. The four pins of...- €12,00 EUR
€12,00 EUR- €12,00 EUR
- Unit price
- per
-
OpenELAB EASY PLUG 6P6C Breakout Board Shield
If the sensors/modules you use are not equipped with the EASY plug interface (RJ11 6P6C), it will cause you trouble connecting to OpenELAB EASY plug Control Board V2.0. We now specially design this EASY Plug Breakout board. It communicates with EASY plug Control Board...- €6,20 EUR
€6,20 EUR- €6,20 EUR
- Unit price
- per
-
OpenELAB EASY PLUG 2812 2x2 Full Color RGB Module
EASY plug 2812 2x2 full color RGB module is a smart external control LED light source that integrates control circuit and lighting circuit. Each LED has the same appearance as a 5050 LED bead, and each component is a pixel point. The pixel point...- €8,95 EUR
€8,95 EUR- €8,95 EUR
- Unit price
- per
-
OpenELAB DIY Electronic Watering Kit Sensors Module Kit
As for some plant lovers, they are keen on spending time in caring for their plants. Yet if they are busy in your work or entertainment, plants may wither by virtue of lacking water. To avoid this, we launched an automatic watering device with...- €65,00 EUR
€65,00 EUR- €65,00 EUR
- Unit price
- per
-
OpenELAB Bluetooth 4.0 Shield Expansion Shield Board
The key studio Bluetooth 4.0 shield is an integration of sensor shield and HM-10 Bluetooth-4.0, fully compatible with UNO R3. So it is very easy to stack it onto the UNO R3 board.The shield has extended all the digital and analog pins out into...- €17,50 EUR
€17,50 EUR- €17,50 EUR
- Unit price
- per
-
OpenELAB Desktop Drawing Robot Writing Robot
This is a CoreXY writing machine. It is compatible with distinct styles fonts like hollow font, filled font and monoline fonts. A customized special signature is not a dreamy reverie for you. In addition, it can draw and outline sleek and beautiful lines. With...- €165,00 EUR
€165,00 EUR- €165,00 EUR
- Unit price
- per
-
OpenELAB Desktop Mini Bluetooth Smart Robot Car Kit V3.0
Today, we are introducing a fascinating programmable smart car that allows children to easily learn programming while gaining practical knowledge in electronics, mechanics, control logic, and computer science. This robot is based on the open-source ARDUINO platform, with very simple assembly and wiring. All...- €92,00 EUR
€92,00 EUR- €92,00 EUR
- Unit price
- per
-
OpenELAB 48 in 1 Sensor Module Kit With Gift Box
This sensor kit contains 48 kinds of commonly used sensor modules in playing the microcontroller, such as active buzzer module, 5V relay module, temperature and humidity module and so on. It is compatible with various microcontrollers and Raspberry Pi. At the same time, we...- €99,00 EUR
€99,00 EUR- €99,00 EUR
- Unit price
- per
-
OpenELAB 4DOF Mechanical Arm Robot Car Learning Starter Kit
Mechanical arm, alike people’s arms, could execute a series of postures. At present, many mechanical arms can’t be operated flexibly because of the change of environment and distance. On tackling this problem, KEYES group has launched a 3 in 1 learning kit-4DOF mechanical robotic...- €125,00 EUR
€125,00 EUR- €125,00 EUR
- Unit price
- per
-
OpenELAB L298P Motor Shield DC Motor Driver Expansion Board
There are various methods to drive motors, and using the L29P chip is a widely adopted solution. The L298P, an excellent high-power motor driver chip from STMicroelectronics, can directly drive DC motors, two-phase, and four-phase stepper motors with a current of up to 2A....- €12,50 EUR
€12,50 EUR- €12,50 EUR
- Unit price
- per
-
Xbee Sensor Expansion Shield V5 - OpenELAB
Arduino is an open-source controller board, popular among electronic enthusiasts for making interactive projects. But for those who are not familiar with electronics, adding circuits to Arduino may be tricky. That’s why we developed this key studio Xbee sensor shield. It can help you...- €12,50 EUR
€12,50 EUR- €12,50 EUR
- Unit price
- per
-
USB Host v1.5 Shield - OpenELAB
USB Host v1.5 shield is an add-on board for Arduino USB Host. Directly plug it to the Arduino board and it will allow Arduino to have a USB Host function. Arduino with host function can communicate with USB devices, such as USB flash disks,...- €16,50 EUR
€16,50 EUR- €16,50 EUR
- Unit price
- per
-
Upgraded 4WD BT Multi-purpose Smart Car V2 - OpenELAB [EOL]
This product is no longer available. The recently enhanced 4WD Multi-Purpose Vehicle is recognized as one of the most sought-after Arduino kits in the market. It boasts an attractive design coupled with robust functionalities. In addition to standard features such as line tracking,...- €89,00 EUR
€89,00 EUR- €89,00 EUR
- Unit price
- per
-
UNO R3 Motor Driver PLUS Dev Board - OpenELAB
Motor PLUS development board is a control board fully compatible with the Arduino IDE development environment.It is as same as the UNO R3 board. In addition, we also made some improvements.Two DC motor drive modules on the board can control one or two DC...- €23,00 EUR
€23,00 EUR- €23,00 EUR
- Unit price
- per
-
UNO R3 Dev Board Compatible With Arduino Uno R3 - OpenELAB
Uno R3 is a microcontroller board based on the ATmega328 (datasheet), fully compatible with ARDUINO UNO REV3. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a...- €22,50 EUR
€22,50 EUR- €22,50 EUR
- Unit price
- per
-
TTP229L 16-key Touch Sensor for arduino Uno R3 - OpenELAB
This is a 16-key digital capacitive touch switch sensor, using the working mode of a capacitive sensing trigger. Its communication is I2C communication, with simple and convenient wiring. Onboard TTP229 capacitive 16-key touch sensor IC Onboard power indicator Working voltage: 2.4V-5.5V Support to set...- €7,80 EUR
€7,80 EUR- €7,80 EUR
- Unit price
- per
-
Touch Key USB Shield UNO R3 Dev Board - Open
Have you seen the Makey Touch keyboard simulation? MaKey MaKey is a very simple circuit board that can make any objects as a computing input device.That’s to say, it can make stairway into a piano, bananas into a keyboard, plasticine into a joystick or...- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
-
Super Starter kit/Learning Kit for Arduino Education W - OpenELAB
Super learning kit is suitable for Arduino enthusiasts. This kit includes 32 projects with detailed tutorials, starting from the basics to more complex projects.Different from other kits, it adds some functional modules, such as RFID, temperature, and humidity modules. There is a connection diagram...- €79,99 EUR
€79,99 EUR- €79,99 EUR
- Unit price
- per
-
STEM Starter Kit - OpenELAB
STEM Starter Kit is a programming learning kit based on Arduino. With a controller, numerous sensors, modules and electronic components, you can do many different DIY projects.This kit also comes with 28 projects tutorials, which are entirely suitable for beginners. Each tutorial has detailed...- €67,55 EUR
€67,55 EUR- €67,55 EUR
- Unit price
- per
-
STEM 2560 Plus Board Starter Kit - OpenELAB
STEM Starter Kit is a programming learning kit based on Arduino. With a controller, numerous sensors, modules and electronic components, you can do many different DIY projects.This kit also comes with 28 projects tutorials, which are entirely suitable for beginners. Each tutorial has detailed...- €85,00 EUR
€85,00 EUR- €85,00 EUR
- Unit price
- per
-
Solar Charger Shield for Arduino Solar Panel Solar Cell - OpenELAB
Solar charger shield boasts the features of collecting energy, power management, and charging, as a stacked shield and compatible with the UNO R3 control board. On this shield, BAT interface could output 5V when connected 3.0V-4.2V rechargeable batteries. At the same time, the USB...- €12,50 EUR
€12,50 EUR- €12,50 EUR
- Unit price
- per
-
Smart Little Turtle Robot Car V3.0 for Arduino - OpenELAB
This programmable smart car kit is an educational and interactive platform designed for users to explore the fundamentals of robotics, electronics, and programming. With a range of modules and sensors, it offers a hands-on learning experience for children, students, and hobbyists. The smart car...- €78,00 EUR
€78,00 EUR- €78,00 EUR
- Unit price
- per
-
Smart Home Kit with PLUS Board for Arduino DIY STEM
This Smart Home Learning Kit based on the Arduino platform is newly rolled out by OpenELAB! It simulates the real smart home and demonstrates a cozy and comfortable life for people.In fact, the logic programming, an invisible hand, controls everything in smart home: it...- €89,99 EUR
€89,99 EUR- €89,99 EUR
- Unit price
- per
-
SIM800C Shield for Arduino UNO R3 Mega 2560 GPRS GSM - OpenELAB
This is a GPRS / GSM Arduino expansion board developed by Keyes. It is a shield module with the frequency of EGSM 900MHz / DCS 1800MHz and GSM850 MHz / PCS 1900MHz, integrated with GPRS, DTMF, and other functions. It supports DTMF, when the...- €22,50 EUR
€22,50 EUR- €22,50 EUR
- Unit price
- per
-
OpenELAB Sensor Starter V2.0 Kit 37 in 1 Box Starter Kit
This is a 37 in 1 sensor learning kit for Arduino, rolled out by OpenELAB. Inside this kit are digital/analog sensors, as well as some special modules such as ultrasonic module, joystick, relay module and acceleration modules, etc. For each module, we provide a...- €89,99 EUR
€89,99 EUR- €89,99 EUR
- Unit price
- per
-
Sensor Shield/Expansion Board V5 - OpenELAB
In the experiments, you might often use a UNO R3 control board and several sensor modules. If the interfaces of power output is not enough, you may need to add a breadboard and use many connection wires. Is it really troublesome？But now, with this...- €9,80 EUR
€9,80 EUR- €9,80 EUR
- Unit price
- per
-
OpenELAB Self-balancing Car Kit for Arduino Robot Kit
This balance car kit is designed utilizing the Arduino development platform. The core component of this kit is the OpenELAB V4.0 (Black) Main Control Board, which works in conjunction with a balance shield equipped with a built-in MPU-6050 serving as the drive board for...- €99,00 EUR
€99,00 EUR- €99,00 EUR
- Unit price
- per
-
Scratch Shield board for Arduino Nano - OpenELAB
Scratch shield is used with Arduino Nano. Using the Scratch programming language, you can easily create simple interactive programs with Arduino or create programs based on the input of Arduino from sensors.Robotale Scratch incorporates a light sensor, sound sensor, a button, and a slider,...- €11,95 EUR
€11,95 EUR- €11,95 EUR
- Unit price
- per
-
RS232 to TTL Conversion Shield Compatible with Arduino - OpenELAB
The RS232 to TTL conversion shield is specially designed for UNO R3 control board, very convenient to change the serial port into the RS232 interface.The shield comes with a DB9 connector（male head）, easy to connect various RS232 interface equipment. It also comes with a...- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
-
Quick Connectors Motor Drive Shield V2 for Arduino Robot - OpenELAB
There are many ways to drive the motor. Our robot uses the most commonly used L298P solution. L298P is an excellent high-power motor driver IC produced by STMicroelectronics. It can directly drive DC motors, two-phase and four-phase stepping motors. The driving current is up...- €18,85 EUR
€18,85 EUR- €18,85 EUR
- Unit price
- per
-
quick Connectors Motor Drive Shield for Arduino Robot Car - OpenELAB
There are many ways to drive the motor. Our robot uses the most commonly used L298P solution. L298P is an excellent high-power motor driver IC produced by STMicroelectronics. It can directly drive DC motors, two-phase and four-phase stepping motors. The driving current up to 2A, and output terminal of...- €16,99 EUR
€16,99 EUR- €16,99 EUR
- Unit price
- per
-
Protoshield for Arduino with Mini Breadboard - OpenELAB
Proto Shield is particularly designed for the Arduino UNO R3. It makes it easy for you to design custom circuits and solder electronics directly on it. For convenient use, there is a large prototyping space of both connected and unconnected spaced through holes on...- €9,80 EUR
€9,80 EUR- €9,80 EUR
- Unit price
- per
-
Proto Screw Shield Assemble Bindingpost Proto Shield - OpenELAB
When we use Arduino to do the work, we always feel bad wiring on the port. It makes us feel less reliable to either use a board harness or a sensor shield with dupont lines connection. Now we launch a binding post shield, which...- €11,85 EUR
€11,85 EUR- €11,85 EUR
- Unit price
- per
-
Pro Mini ATMEGA328P Dev Board For Arduino - OpenELAB
Keystudio Pro Mini is a small microcontroller board based on the ATmega328, intended for use on breadboards and when space is at a premium.It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, a 16 MHz...- €11,50 EUR
€11,50 EUR- €11,50 EUR
- Unit price
- per
-
PRO MICRO 5V 16MHZ Dev Board For Arduino - OpenELAB
The processor core of the PRO MICRO development board is ATMEGA32U4-MU, fully compatible with ARDUINO.It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable to get started. It has 18 digital input/output pins (of which 5...- €17,50 EUR
€17,50 EUR- €17,50 EUR
- Unit price
- per
-
PN532 NFC/RFID Controller Shield for Arduino Uno R3 - OpenELAB
PN532 NFC/RFID Controller Shield based on a PN532 chip is used for field communication close to 13.56MHz. This shield is equipped with an antenna onboard, so there is no external antenna coil. It is compatible with SPI, IIC, and UART interfaces to communicate. When...- €15,50 EUR
€15,50 EUR- €15,50 EUR
- Unit price
- per
-
NANO Shield with DC port for arduino Nano3.0 - OpenELAB
We particularly design this shield to make up the problem of connecting the sensor shield to the key studio NANO control board. This NANO shield has extended the digital and analog ports out as 3PIN interface (G-GND V-5V S-digital port/analog port) It also breaks...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
NANO Shield Board W/ Power Switch for Arduino Nano - OpenELAB
Nano ch340 is a tiny control board based on Arduino platform, which is deeply popular. However, if want to connect several sensor modules to Nano ch340, and connect external power, we need to use breadboard and a bunch of jumper wires, which is pretty...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
NANO PLUS Dev Board Compatible with Arduino NANO - OpenELAB
The processor core of NANO PLUS is ATMEGA328P-AU. It is as same as the official Arduino Nano in addition to the driver file and USB to serial chip (CH340G). It also has 14 digital input/output interfaces (6 of which can be used as PWM output),...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
Nano IO shield for XBEE and NRF24L01 Socket
Nano ch340 is a small control board based on Arduino, very popular for everyone. But sometimes it is troublesome to connect a bunch of sensor modules and external power. So we particularly design this Nano IO shield.This simple NANO IO shield extends all the...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
NANO CH340 IO Shield For Arduino - OpenELAB
This is a simple and small NANO IO shield. It breaks out all the pins of Nano ch340, easy to hook it up to make experiments. Onboard comes with two 3mm fixed holes, convenient to fix the shield on other objects. Terminal block spacing:...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
Multi-purpose shield V2 W/Gift Box - OpenELAB
Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connection. Download the program to complete experiment.It is multi-purpose and we offer code libraries of all modules that have been tested. You can use them directly. There are extension...- €15,00 EUR
€15,00 EUR- €15,00 EUR
- Unit price
- per
-
Multi-purpose Shield V1 for Arduino Starter - OpenELAB
Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connection. Download the program to complete the experiment.It is multi-purpose and we offer code libraries of all modules that have been tested. You can use them directly.There are extension...- €14,50 EUR
€14,50 EUR- €14,50 EUR
- Unit price
- per
-
Motion Sensing Glove Gesture Nano Control Smart Car - OpenELAB
Based on MPU6050, this motion-sensing glove is capable to recognize several directions of gestures. Compared with traditional operation modes like buttons or sliding, gestures allow you to control your devices at will.This glove connects with Mecanum cars, robot arms, and biped robots via BT24...- €41,50 EUR
€41,50 EUR- €41,50 EUR
- Unit price
- per
-
Mini Caterpillar Tank Robot V3.0 for Arduino - OpenELAB
This STEM educational V3.0 tank robot is newly upgraded, adding a line-tracking and a fire- extinguishing function. It vigorously enhances the relationship between kids and parents, and sparks children’s imagination through programming and coding.In the course of the assembly process, you can see its...- €118,00 EUR
€118,00 EUR- €118,00 EUR
- Unit price
- per
-
MEGA Sensor Shield V1 for Arduino Mega - OpenELAB
Have you met with these troubles? when connecting a couple of sensor modules to the MEGA 2560 control board, sometimes power output interfaces are not enough, so need to use the breadboard and the wiring is rather troublesome.Now don’t worry about that. You can...- €12,99 EUR
€12,99 EUR- €12,99 EUR
- Unit price
- per
-
Mega Protoshield/Prototype Expansion Board V3 - OpenELAB
ProtoShield is particularly designed for the MEGA 2560. It makes it easy for you to design custom circuits and solder electronics directly on it.For convenient use, there is a large prototyping space of both connected and unconnected spaced through holes on the shield.There is...- €11,85 EUR
€11,85 EUR- €11,85 EUR
- Unit price
- per
-
MAX Dev Board Compatible Arduino UNO R3 - OpenELAB
Max development board is an Arduino uno-compatible board, which is based on ATmega328P MCU, and with a cp2102 Chip as a UART-to-USB converter.MAX development board integrates three LEDs, two 6812RGB LEDs, two button switches, a buzzer, a microphone sensor, a light sensor, and an...- €27,50 EUR
€27,50 EUR- €27,50 EUR
- Unit price
- per
-
OpenELAB Maker Learning Kit/Starter Kit V1
Maker learning kit is a DIY kit for scientific experiments based on ARDUINO. Together with controller, sensors, electronic components, you can build different DIY projects. It can not only enhance operational ability of teenagers, but also develop their imagination and creativity.Children who are into...- €69,00 EUR
€69,00 EUR- €69,00 EUR
- Unit price
- per
-
OpenELAB Maker Learning kit Starter kit For Arduino
Maker learning kit is a DIY kit for scientific experiments based on Arduino. Together with controller, sensors, electronic components, you can build different DIY projects. It can not only enhance operational ability of teenagers, but also develop their imagination and creativity. Children who are...- €85,00 EUR
€85,00 EUR- €85,00 EUR
- Unit price
- per
![Upgraded 4WD BT Multi-purpose Smart Car V2 - OpenELAB [EOL]](http://openelab.io/cdn/shop/files/1_62aefb5b-1cbd-4793-9499-b35cc0ca0e26_785x.png?v=1742574157)
