Dev Board
Dev Board is a development board designed for electronic engineers and developers. It provides rich interface and module support to facilitate rapid development and debugging of hardware and software. It is suitable for prototyping, learning and various embedded projects, and is an ideal tool for innovative development.
-
Raspberry Pi Pico W Wireless RP2040 MCU BoardBoard Specifications Based on Raspberry Pi Pico, Raspberry Pi Pico W comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks, making it the perfect solution for wireless network control and communication. Key features include:...
- From €5,80 EUR
€5,80 EUR- From €5,80 EUR
- Unit price
- per
Save €0,00 -
ESP32 Development Board Module CP2102 Type-C USB Interface WROOM32ESP32-WROOM-32 is a general-purpose WiFi+BT+BLE MCU module, featuring low-power Bluetooth and Wi-Fi. It is widely applicable, integrating SPI flash memory and supporting a wide range of wireless communication connections. It supports direct connection to the Internet through a router, while Bluetooth allows users to...
- From €5,90 EUR
€5,90 EUR- From €5,90 EUR
- Unit price
- per
Save €0,00 -
Epaper Breakout Board - 24-pin FPC ConnectionFeature ePaper display extension designed for Seeed Studio XIAO boards: Provide 24-pin FPC connector, to allow you to drive ePaper display seamlessly Additional 8-pin 2.54 Header: Offers flexibility by letting you connect to any microcontroller like Arduino UNO or Rasbperry Pi Plug and Play: All pins...
- €5,90 EUR
€5,90 EUR- €5,90 EUR
- Unit price
- per
Save €0,00 -
ESP32-CAM Camera ModuleOverviewThe ESP32-CAM is a small size, low power consumption camera module based on ESP32. It comes with an OV2640 camera and an ESP32-CAM-MB micro usb to serial port adapter. The ESP32-CAM can be widely used in intelligent IoT applications such as wireless video monitoring, WiFi...
- From €5,99 EUR
€5,99 EUR- From €5,99 EUR
- Unit price
- per
Save €0,00 -
ESP8266 ESP-01S with USB adapter Wlan WiFi moduleSet consisting of one ESP8266-01S and one USB adapter! Large range through Wlan 802.11 b/g/n standard! Universal use thanks to three available operating modes: Wlan Router (AP), Wlan Client (STA) and both at the same time (AP + STA)! Thanks to powerful 80MHz processor...
- From €5,99 EUR
€5,99 EUR- From €5,99 EUR
- Unit price
- per
Save €0,00 -
OpenELAB EASY PLUG 3W LED Module for ArduinoThis is a high-power LED module. The main function is to turn on or off a plugin LED. It has features of supper bright and high power, and is compatible with EASY plug Control board V2.0. For easy wiring, the module’s 3 pins are...
- €6,20 EUR
€6,20 EUR- €6,20 EUR
- Unit price
- per
Save €0,00 -
OpenELAB EASY PLUG 6P6C Breakout Board ShieldIf the sensors/modules you use are not equipped with the EASY plug interface (RJ11 6P6C), it will cause you trouble connecting to OpenELAB EASY plug Control Board V2.0. We now specially design this EASY Plug Breakout board. It communicates with EASY plug Control Board...
- €6,20 EUR
€6,20 EUR- €6,20 EUR
- Unit price
- per
Save €0,00 -
OpenELAB EASY PLUG 4-Digit LED Display ModuleThis is a 4-digit 0.36’’ Common Anode LED display module, a 12-pin display module with score points. The driver chip used in the matrices is TM1637, using only two signal cables to make the microcontroller control the 4-digit LED display. The four pins of...
- €6,20 EUR
€6,20 EUR- €6,20 EUR
- Unit price
- per
Save €0,00 -
OpenELAB EASY PLUG 8*8 LED Dot Matrix ModuleWhat's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix.This module uses HT16K33 chip to drive an 8x8 dot matrix.Just need to use the I2C communication port of microcontroller to control...
- €6,20 EUR
€6,20 EUR- €6,20 EUR
- Unit price
- per
Save €0,00 -
OpenELAB EASY PLUG 8x8 LED Matrix ModuleWhat's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix.This module uses HT16K33 chip to drive an 8x8 dot matrix. Just need to use the I2C communication port of microcontroller to...
- €6,30 EUR
€6,30 EUR- €6,30 EUR
- Unit price
- per
Save €0,00 -
ELAB-ATmega328DIP Board Microcontroller BoardAZ-ATmega328DIP Board Microcontroller Board ATmega16U2 8-bit Developer Board with USB Cable ✅ Easy programming via USB the cable and solderless pins allow even beginners to start projects immediately. ✅ 14 digital inputs and outputs & 6 analog inputs, allowing the microcontroller to be used...
- From €6,50 EUR
€6,50 EUR- From €6,50 EUR
- Unit price
- per
Save €0,00 -
TTP229L 16-key Touch Sensor for arduino Uno R3 - OpenELABThis is a 16-key digital capacitive touch switch sensor, using the working mode of a capacitive sensing trigger. Its communication is I2C communication, with simple and convenient wiring. Onboard TTP229 capacitive 16-key touch sensor IC Onboard power indicator Working voltage: 2.4V-5.5V Support to set...
- €6,50 EUR
€6,50 EUR- €6,50 EUR
- Unit price
- per
Save €0,00 -
Raspberry Pi Pico 2 RP2350NOTE: This product is priced including tax for the European region. Raspberry Pi Pico 2 RP2350 is a small but powerful microcontroller development board, equipped with Raspberry Pi's own RP2350 chip, with high performance and low power consumption. It is equipped with a dual-core...
- €6,50 EUR
€6,50 EUR- €6,50 EUR
- Unit price
- per
Save €0,00 -
Seeed Studio XIAO ESP32-C3 WIFI Dev BoardFlexible MCU Board: Incorporate the ESP32-C3 32-bit RISC-V chip, operating up to 160 MHz, mounted multiple development ports, supported by Arduino / CircuitPythonOutstanding RF performance: Implement complete Wi-Fi functions and Bluetooth Low Energy, while supporting communication over 100m with a U.FL antennaElaborate Power Design:...
- €6,50 EUR
€6,50 EUR- €6,50 EUR
- Unit price
- per
Save €0,00 -
Seeed Studio XIAO RP2040 Supports ArduinoHigh Performance: Powered by Raspberry Pi 2040 chip, dual-core operating up to 133 MHz, equipped 264KB of SRAM, and 2MB of onboard flash memory Ultra-small Design: 21 x 17.5mm, Seeed Studio XIAO series classic form factor, suitable for wearable devices Multiple Development Interfaces: 2x buttons, 11x digital / 4x...
- €6,90 EUR
€6,90 EUR- €6,90 EUR
- Unit price
- per
Save €0,00 -
Seeed Studio XIAO ESP32-C6 WIFI Dev BoardXIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and Thread). Designed with the thumb-size footprint and a single-sided mount of the XIAO Series,...
- €6,90 EUR
€6,90 EUR- €6,90 EUR
- Unit price
- per
Save €0,00 -
NodeMCU Lua Amica Module V2 ESP8266 ESP-12F WIFIThe NodeMCU Amica V2 is a quintessential ESP developer board. Designed to be breadboard-friendly and featuring the robust ESP8266-12F processor from Espressif with integrated WLAN, this controller provides an accessible entry point into IoT development. Firmware Flexibility: Multiple firmware versions from the manufacturer can...
- From €6,99 EUR
€6,99 EUR- From €6,99 EUR
- Unit price
- per
Save €0,00 -
OpenELAB EASY PLUG 2812 2x2 Full Color RGB ModuleEASY plug 2812 2x2 full color RGB module is a smart external control LED light source that integrates control circuit and lighting circuit. Each LED has the same appearance as a 5050 LED bead, and each component is a pixel point. The pixel point...
- €7,50 EUR
€7,50 EUR- €7,50 EUR
- Unit price
- per
Save €0,00 -
ESP32-C6-WROOM-1-N8 ModuleThe ESP32-C6-WROOM-1-N8 is a module based on the ESP32-C6, offering support for WiFi 6 in the 2.4GHz band, Bluetooth 5, Zigbee 3.0, and Thread. It is pin-to-pin compatible with the ESP32-WROOM series modules. With its low power consumption, it is an ideal choice for various IoT devices. This module includes 8 MB...
- From €7,90 EUR
€7,90 EUR- From €7,90 EUR
- Unit price
- per
Save €0,00 -
Espressif ESP32 S3 WROOM 2 ModuleThe ESP32-S3-WROOM-2 is a versatile Wi-Fi + Bluetooth Low Energy (BLE) MCU module with extensive peripheral interfaces and powerful neural network processing and signal processing capabilities. It is specifically designed for the AI and AIoT markets, making it suitable for various application scenarios such...
- From €8,30 EUR
€8,30 EUR- From €8,30 EUR
- Unit price
- per
Save €0,00 -
ESP32-S3-Nano - Development BoardBoard Specifications The ESP32-S3-Nano adopts ESP32-S3R8 chip and is compatible with Arduino Nano ESP32. It is compact in size and powerful, suitable for applications such as IoT and MicroPython, and easy to integrate into your projects. Adopts ESP32-S3R8 chip with Xtensa® 32-bit LX7 dual-core processor, capable of running at...
- From €8,36 EUR
€8,36 EUR- From €8,36 EUR
- Unit price
- per
Save €0,00 -
Camera for Raspberry PiOur high quality Raspberry Pi camera with 5 mega pixel HD camera and high resolution allows you to capture clear images for any type of project. The camera features the same characteristics and ensures the same performance as the original.The included cable is about...
- From €8,49 EUR
€8,49 EUR- From €8,49 EUR
- Unit price
- per
Save €0,00 -
Protoshield for Arduino with Mini Breadboard - OpenELABProto Shield is particularly designed for the Arduino UNO R3. It makes it easy for you to design custom circuits and solder electronics directly on it. For convenient use, there is a large prototyping space of both connected and unconnected spaced through holes on...
- €8,50 EUR
€8,50 EUR- €8,50 EUR
- Unit price
- per
Save €0,00 -
Sensor Shield/Expansion Board V5 - OpenELABIn the experiments, you might often use a UNO R3 control board and several sensor modules. If the interfaces of power output is not enough, you may need to add a breadboard and use many connection wires. Is it really troublesome？But now, with this...
- €8,50 EUR
€8,50 EUR- €8,50 EUR
- Unit price
- per
Save €0,00 -
USB Host v1.5 Shield - OpenELABUSB Host v1.5 shield is an add-on board for Arduino USB Host. Directly plug it to the Arduino board and it will allow Arduino to have a USB Host function. Arduino with host function can communicate with USB devices, such as USB flash disks,...
- €8,50 EUR
€8,50 EUR- €8,50 EUR
- Unit price
- per
Save €0,00 -
Expansion Board+TF Card for Data Recording - OpenELABWhen we conduct DIY experiments, we tend to connect some sensors with Arduino microcontrollers to detect all kinds of data. And we will need to save these data and record the saving time for follow-up studies. Therefore, we have designed this expansion board to...
- €8,55 EUR
€8,55 EUR- €8,55 EUR
- Unit price
- per
Save €0,00 -
EASY PLUG RJ11 Blue LED Module - OpenELABThis is a special LED module. When you connect it to ARDUINO, after program, it can emit beautiful green light. Of course, you can also control it using PWM. It will be like fireflies at night. Isn’t it cool? We can also combine it...
- €8,80 EUR
€8,80 EUR- €8,80 EUR
- Unit price
- per
Save €0,00 -
EASY PLUG RJ11 Red LED Module - OpenELABThis is a special LED module. When connecting to ARDUINO, after programming, it can emit beautiful red light. Of course, you can also control it by PWM. It will be like fireflies at night.You can combine with other sensors to do various interactive experiments.This...
- €8,80 EUR
€8,80 EUR- €8,80 EUR
- Unit price
- per
Save €0,00 -
EASY PLUG RJ11 Green LED Module - OpenELABThis is a special LED module. When connecting to ARDUINO, after programming, it can emit beautiful green light. Of course, you can also control it by PWM. It will be like fireflies at night.You can combine with other sensors to do various interactive experiments.This...
- €8,80 EUR
€8,80 EUR- €8,80 EUR
- Unit price
- per
Save €0,00 -
EASY PLUG RJ11 Yellow LED Module - OpenELABThis is a special LED module. When connecting to ARDUINO, after programming, it can emit beautiful yellow light. Of course, you can also control it by PWM. It will be like fireflies at night.You can combine with other sensors to do various interactive experiments.This...
- €8,80 EUR
€8,80 EUR- €8,80 EUR
- Unit price
- per
Save €0,00 -
EASY PLUG RJ11 Connection Cable with Crystal Port 5pcs - OpenELABShipping list:Easy-plug Connection Cable *5
- €8,80 EUR
€8,80 EUR- €8,80 EUR
- Unit price
- per
Save €0,00 -
EASY PLUG SR01 Ultrasonic Sensor - OpenELABUltrasonic sensors use sonar to determine the distance from the object. This module uses a CS100A chip that can test the distance from 4 cm to 300 cm is unequal, easy to use. Its measure distance is accurate and stable, which can be applied...
- €8,80 EUR
€8,80 EUR- €8,80 EUR
- Unit price
- per
Save €0,00 -
RS232 to TTL Conversion Shield Compatible with Arduino - OpenELABThe RS232 to TTL conversion shield is specially designed for UNO R3 control board, very convenient to change the serial port into the RS232 interface.The shield comes with a DB9 connector（male head）, easy to connect various RS232 interface equipment. It also comes with a...
- €8,85 EUR
€8,85 EUR- €8,85 EUR
- Unit price
- per
Save €0,00 -
Touch Key USB Shield UNO R3 Dev Board - OpenHave you seen the Makey Touch keyboard simulation? MaKey MaKey is a very simple circuit board that can make any objects as a computing input device.That’s to say, it can make stairway into a piano, bananas into a keyboard, plasticine into a joystick or...
- €8,85 EUR
€8,85 EUR- €8,85 EUR
- Unit price
- per
Save €0,00 -
Seeed Studio XIAO ESP32-S3 WIFI Dev BoardSeeed Studio XIAO ESP32S3 leverages 240MHz Xtensa 32-bit LX7 dual-core processor, supporting both WiFi and BLE 5.0 wireless connectivities, a 2.4GHz Rod antenna, allows for deep sleep mode with power consumption as low as 14μA while supporting lithium battery charging management. Ideal for the Internet of Things, Smart Homes,...
- €8,98 EUR
€8,98 EUR- €8,98 EUR
- Unit price
- per
Save €0,00 -
ELAB Raspberry Pi 4 Heat Sink (Copper)Sufficient Quantity of Heat Sinks: The Raspberry Pi is equipped with four heat sinks, ensuring a wide heat dissipation area for more effective heat distribution and exhaust. This provides robust support for the stable operation of the Raspberry Pi.Strong Thermal Conductivity of Copper Heat...
- €8,99 EUR
€8,99 EUR- €8,99 EUR
- Unit price
- per
Save €0,00 -
Pro Mini ATMEGA328P Dev Board For Arduino - OpenELABKeystudio Pro Mini is a small microcontroller board based on the ATmega328, intended for use on breadboards and when space is at a premium.It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, a 16 MHz...
- €9,20 EUR
€9,20 EUR- €9,20 EUR
- Unit price
- per
Save €0,00 -
Solar Charger Shield for Arduino Solar Panel Solar Cell - OpenELABSolar charger shield boasts the features of collecting energy, power management, and charging, as a stacked shield and compatible with the UNO R3 control board. On this shield, BAT interface could output 5V when connected 3.0V-4.2V rechargeable batteries. At the same time, the USB...
- €9,65 EUR
€9,65 EUR- €9,65 EUR
- Unit price
- per
Save €0,00 -
Scratch Shield board for Arduino Nano - OpenELABScratch shield is used with Arduino Nano. Using the Scratch programming language, you can easily create simple interactive programs with Arduino or create programs based on the input of Arduino from sensors.Robotale Scratch incorporates a light sensor, sound sensor, a button, and a slider,...
- €9,75 EUR
€9,75 EUR- €9,75 EUR
- Unit price
- per
Save €0,00 -
ATmega32u4 Leonardo Mini Compatible ArduinoThis is a development board based on the Atmel ATmega32U4 microcontroller. For ease of use, we also provide a USB cable. Using the 16 MHz crystal oscillator, the microcontroller offers 8-bit resolution, 32 KB of flash memory, and 2.5 KB of RAM. A key...
- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 8833 Motor Driver Expansion Board PH2.0 USB Cable DC 6-9VThe 8833 motor driver expansion board uses PH2.0 terminals and an 8833 motor driver chip driven by the two-channel H bridge whose largest current can be up to be 1.5A. It also integrates an IR receiver, ultrasonic sensor ports, analog ports, line tracking interfaces,...
- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
Save €0,00 -
ELAB Raspberry Pi 5 Active CoolerConsistency in Appearance: The Raspberry Pi 5 fan maintains the same appearance as the official design, seamlessly integrating into the overall look of the Raspberry Pi 5, making it a unified solution.Programmable Speed: With programmable settings, users can adjust the fan speed according to...
- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
Save €0,00 -
Raspberry Pi High Quality Camera M12 Replacement CamerasThis camera can be used with Raspberry Pi High Quality Camera M12, 12.3MP IMX477R Sensor. M12 High Resolution Lens, 14MP, 184.6° Ultra Wide Angle, 2.72mm Focal Length, Compatible With Raspberry Pi High Quality Camera M12 WS1842714M12 High Resolution Lens 14MP | 184.6° FOV | Ultra wide angle ...
- From €9,90 EUR
€9,90 EUR- From €9,90 EUR
- Unit price
- per
Save €0,00 -
Waveshare ESP8266 for Raspberry Pi Pico Wifi Module TCP UDPWaveshare ESP8266 For Raspberry Pi Pico Wifi Module Uart Support TCP UDP Onboard Antenna Expanding Board Support Dropshipping and Wholesaling. Onboard for Raspberry Pi Pico interface, suitable for Raspberry Pi Pico series motherboardsUART interface communication, universal serial port AT command control, can quickly get...
- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
Save €0,00 -
Mega Protoshield/Prototype Expansion Board V3 - OpenELABProtoShield is particularly designed for the MEGA 2560. It makes it easy for you to design custom circuits and solder electronics directly on it.For convenient use, there is a large prototyping space of both connected and unconnected spaced through holes on the shield.There is...
- €9,95 EUR
€9,95 EUR- €9,95 EUR
- Unit price
- per
Save €0,00 -
Proto Screw Shield Assemble Bindingpost Proto Shield - OpenELABWhen we use Arduino to do the work, we always feel bad wiring on the port. It makes us feel less reliable to either use a board harness or a sensor shield with dupont lines connection. Now we launch a binding post shield, which...
- €9,95 EUR
€9,95 EUR- €9,95 EUR
- Unit price
- per
Save €0,00 -
Xbee Sensor Expansion Shield V5 - OpenELABArduino is an open-source controller board, popular among electronic enthusiasts for making interactive projects. But for those who are not familiar with electronics, adding circuits to Arduino may be tricky. That’s why we developed this key studio Xbee sensor shield. It can help you...
- €9,95 EUR
€9,95 EUR- €9,95 EUR
- Unit price
- per
Save €0,00 -
EASY PLUG TEMT6000 Ambient Light Sensor - OpenELABLight sensors are probably one of the most common sensors in life. They can be found in your laptop, phone or home lighting system. A light sensor measures the level of light in a room or ambient light in a space. This EASY plug...
- €11,00 EUR
€11,00 EUR- €11,00 EUR
- Unit price
- per
Save €0,00 -
ESP32 D1 Mini Nodemcu Development BoardCPU AND MEMORY The ESP32-D0WDQ6 is equipped with two low-power Xtensa B32-bit LX6 MCUs.On-chip storage includes 448KB of ROM for program booting and kernel function calls.There is also 520KB of on-chip SRAM for data and instruction storage. The RTC has 8KB of SRAM, known...
- From €11,49 EUR
€11,49 EUR- From €11,49 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4 channel 5V Relay Shield module for Arduino UNO R3The OpenELAB relay shield has integrated a 4-channel 5V relay module, which is fully compatible with the UNO R3 control board. The 4-channel relay on the shield is active at HIGH level. Separately connect the 4-channel relay to the digital port 4, 5, 6, 7...
- €11,50 EUR
€11,50 EUR- €11,50 EUR
- Unit price
- per
Save €0,00
