AVADA - Best Sellers

Note: All products are tax-inclusive. PLC M12 V1.1 is a Base specifically design for industrial application. DC Power in 9-24V. Does this PLC remind you of the 'PLC' in industrial control short for 'Programmable Logic Controller'. This PLC base is not the typical 'PLC' used...

The M2-M3 304 Stainless Steel Phillips Flat Head Screws are precision-engineered for applications that require a flush, smooth surface finish. Made from high-quality 304 stainless steel, these screws offer exceptional corrosion resistance and long-lasting durability, making them suitable for both indoor and outdoor use....

Note: All products are tax-inclusive. Base15 V1.1 is a "5x5cm system" universal functional base, the thickness of the product is 15mm (excluding the busbar pin header), including 9~24V to 5V DCDC circuit and 2 custom Grove expansion ports, as well as the PCB center...

Note: All products are tax-inclusive. Base26 V1.1 is a "5x5cm system" universal functional base, the thickness of the product is 26mm (excluding the busbar pin header), including 9~24V to 5V DCDC circuit, 2 custom Grove expansion ports, 1 VH3.96-4P interface, 1 side opening M12...

Note: All products are tax-inclusive. Base AAA is a '5x5cm' series base with 4 x AAA Dry Batteries holder. Unlike other Lithium Battery Base, Base AAA is powered by safe and reliable dry batteries, and the onboard power switch allows for manual power shutdown, reducing...

Note: All products are tax-inclusive. ThermalOnline Cat-M is an industrial-grade remote thermal monitoring kit. Adopt the MLX90640 IR thermal sensor (32x24 array), M5Stack BASIC Core(ESP32 controller), and SIM7080G module, support CatM/NB-IoT/ Wi-Fi` communications, for non-contact remote temperature measurement. The rich expansion options including I2C + UART +...

Note: All products are tax-inclusive. LAN Base is an Ethernet controller base, built-in W5500 full hardware TCP/IP embedded Ethernet controller (SPI communication interface), supports multiple communication protocols (TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE, etc.) and integrated storage buffer area to facilitate Ethernet data packet processing....

Note: All products are tax-inclusive. BTC is an M5 Base that allows you to stand your M5 Core instead of laying it down or hang on the wall. BTC is not just a seat for holding the M5 Core but also comes with several...

Note: All products are tax-inclusive. Introducing the PM2.5 Air Quality Module: The Ultimate Ambient Air Quality Testing SolutionAccurate Air Quality Monitoring: The PM2.5 Air Quality Module is a cutting-edge solution for measuring ambient air quality. It uses PMSA003 digital universal particulate matter concentration sensor to collect and...

Note: All products are tax-inclusive. Stamp Timer Power is alow-power power control module with built-in RTC wake-up in a STAMP series package, with manual wake-up+manual sleep+RTC timing wake-up+battery charging+5V boost output+3V3 power output and other functions, and the RTC adoptsBM8563,The overflow time can be...

AS32-TTL-100 is a 100 mW industrial-grade wireless data transmission module with high stability working on 433MHz frequency. The module uses an SX1278 main chip, LoRa spread spectrum transmission, and TTL level output, and it is compatible with 3.3V and 5V IO port voltage. LORA...

Note: All products are tax-inclusive. STAMP Cat-M is a compact global version of CatM & NB-IoT dual mode wireless communication module based on SIM7080G solution. The module adopts serial communication, Control Via AT Commands, and supports multiple communication protocols. It is designed for applications that need...

Note: All products are tax-inclusive. STAMP IO is an IO expansion board based on STM32F030 main controller, using I2C communication interface, providing 8 IO expansion. Each IO supports independent configuration of digital input/output, ADC, SERVO control, RGB LED control modes. Suitable for multi-channel digital/analog...

Industrial long distance 10km SX1278 wireless transceiver module mini wireless serial control. 410-441MHz(default 433MHz), 1W, industrial-grade wireless data transmission module. LORA spread spectrum modulation, high anti-interference and long distance transmission(up to 10km). Easy Operation: four working modes and can be switched freely during application....

The AS32-D20(915M) is a high-performance data transceiver module, built with the SX1278 chip, offering reliable long-range wireless communication over the 915MHz frequency band. This module supports data transmission distances of up to 10km in optimal conditions, making it ideal for remote monitoring, IoT applications,...

Perfect choice for beginners to learn, electronics and programs.The Basic Starter Kit is easy to use and you can learn to program at an introductory level.You can use ESP32 modules to control other modules, such as LED, DHT11, OLED modules, etc. Product Parameters 1...

The ESP32 is an integrated single-chip solution that supports both 2.4 GHz Wi-Fi and Bluetooth dual-mode, utilizing TSMC's ultra-low-power 40nm technology. It offers superior RF performance, stability, versatility, and reliability while maintaining ultra-low power consumption to meet various power requirements. This makes it suitable...

The ESP32-WROOM-32UE is a powerful Wi-Fi and Bluetooth module designed for a wide range of applications. Based on the ESP32 dual-core processor, it combines 2.4 GHz Wi-Fi and Bluetooth/Bluetooth LE in a single integrated solution. The module is ideal for IoT applications, wearable electronics,...

Note: All products are tax-inclusive. STAMP PWR485 is anRS485 communication expansion board, that converts the 3.3V TTL level of the MCU serial port into a differential signal compatible with the RS485 standard. With a compact size 20* 4.6* 23mm, it can be integrated into various embedded...

Note: All products are tax-inclusive. Timer Camera X is a camera module based on ESP32, integrated with ESP32 chip and 8M-PSRAM. The camera (ov3660) with 3 million pixels, DFOV 66.5 ° and 2048x1536 resolution photos, a built-in 140mAh battery, and an LED status indicator, featuring...

Note: All products are tax-inclusive. The UnitV2 USB is the latest high efficiency AI recognition module from M5Stack, it adopts Sigmstar SSD202D (integrated dual-core Cortex-A7 1.2GHz processor) control core, 128MB-DDR3 memory and 512MB NAND Flash. It offers USB-A universal interface, which allows you to...

Note: All products are tax-inclusive. UnitV(OV7740) is the new AI Camera powered by Kendryte K210, an edge computing system-on-chip(SoC) with dual-core 64bit RISC-V CPU and state-of-art neural network processor. UNIT-V AI Camera features its integration with machine vision capabilities, featuring the unprocessed acceptability to AI Visioning with...

Note: All products are tax-inclusive. Servo Kit 360° is a 9g servo with LEGO compatible fixed bracket.There are 180 ° or 360 ° specifications.The independent design of the fixed bracket can be easily disassembled, and the product is completely designed according to the LEGO standard...

Note: All products are tax-inclusive. Servo Kit 180°/360° is a 9g servo with LEGO compatible fixed bracket.There are 180 ° or 360 ° specifications.The independent design of the fixed bracket can be easily disassembled, and the product is completely designed according to the LEGO standard...

Note: All products are tax-inclusive. The SG90 servo is a bespoke 9g servo motor, designed and manufactured by M5Stack. This product is fully compatible with the "8Servos" HAT and "PuppyC" base. This micro servo is designed for ease of use by beginners. There is no...

Note: All products are tax-inclusive. Catch is a gripper that uses a SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasing operations. The structure adopts a design...

Note: All products are tax-inclusive. GROVE-T is a T-shaped hub. Is this remind you the HUB unit ? They are basically the same thing, just in different shape.This is also used for HY2.0-4P port expanding. Notice: GROVE-T is just a hardware expander, if you are looking for...

Note: All products are tax-inclusive. The GROVE-TO-4P is a GROVE expansion connector. This component facilitates the routing of the pins of the HY2.0-4P interface, which can assist in the expansion of sensors that require connection via jumper wires. The design of this connector facilitates the...

A 24AWG 4-CORE Shielded Cable is a type of STP (shielded twisted pair) cable that is frequently utilized for the transmission of digital data. The aluminum foil and woven layer wrapping serve to effectively reduce signal interference and enhance the stability of communication lines....

Note: All products are tax-inclusive. The HY2.0-4P SMD is a 2.0mm-4Pin Grove connector that is equipped with a locating pin. The application of this component to a printed circuit board (PCB) design facilitates a more straightforward and expedient connection to the M5Stack Unit system, thereby...

Note: All products are tax-inclusive. The Grove2USB-C adapter board offers a straightforward and efficient method for connecting the input/output (I/O) pins of Grove-based sensors and modules to the D+ and D- pins supported by USB-C. It is well-suited for a range of applications, including electronic...

Note: All products are tax-inclusive. The M5 Magnetic Type-C Cable is a Type-C data cable with a magnetic plug. Its magnetic design not only facilitates device connection but also significantly reduces interface wear, thereby extending the cable's service life. In the event of accidental pulling,...

Note: All products are tax-inclusive. The M5 Magnetic Type-C Cable is a Type-C data cable with a magnetic plug. Its magnetic design not only facilitates device connection but also significantly reduces interface wear, thereby extending the cable's service life. In the event of accidental pulling,...

Note: All products are tax-inclusive. The PROTO Board is a prototype pegboard that is suitable for use in any context. The freedom to create a bespoke project is afforded by the prototyping pegboard, which enables the configuration of a customized circuit to interact with the...

Note: All products are tax-inclusive. BUS-Socket is a pair of M-BUS sockets, female and male. 2X15 pins. They share the same specifications as the BUS socket on M5Cores. The male piece has a 90-degree bend to the side.   Product Features 90-degree bend pin 2x15...

Note: All products are tax-inclusive. Frame like its namesake, is a frame for M5Core. It gives you an extra structure supporting or containing M5Core.   Include 2x FRAME Panel Set 8x hexagon screw KA2x4 2x HEX KEY   Specification Resources Parameter Net weight 20g Gross...

Note: All products are tax-inclusive. The AtomS3R Ext is a prototype development expansion programmable controller based on the ESP32-S3 main controller. It has been designed specifically for prototype validation and expansion development. The device features a prototype breadboard on the top surface, which allows users...

Note: All products are tax-inclusive. UNIT POWER is a DC Power Supply Unit with built-in DCDC step-down chip ME3116AM6G, supporting DC 6-24V->5V output. The input side is a standard DC-015 Circular interface that can be directly connected to common DC power adapters, and the 5V output...

Note: All products are tax-inclusive. The M5BOX is a sky blue PP case with M5Stack printed in white. When using hardware such as the M5Core, there may be times when you need to store the main unit or modules. Often you may lose screws,...

Note: All products are tax-inclusive. Panel Frame is a frame construction for fixing Core1, Core2 and Tough series M5Core. Offering two installation methods of screw and double-sided adhesive tape. For M5Tough installation, 3M waterproof double-sided adhesive tape can provide waterproof function. For the M5Core (Core1,...

Note: All products are tax-inclusive. BAVG2Socket is a transfer line terminal suitable for RS485 line construction. The conversion head integrates the 2.54-2P terminal and the DC power input interface into a 3.96-4P specification terminal. It is convenient to access the equipment using 3.96-4P interface in...

Note: All products are tax-inclusive. Proto Module Frame is the plastic frame for Proto Module. Include 2x M5Stack Proto Module Frame 8x M2x5 Tapping Screw Specification Net Weight 6.1g Gross Weight 8.9g Product Size 54*54*7.6mm Package Size 90*135mm

Note: All products are tax-inclusive. BUS Socket 13.2 is a M-BUS bus expansion header set, including 10 2x15P headers. The spacing and the number of holes of the female row are the same as those on the M5Core, which can be used for DIY design...

Note: All products are tax-inclusive. BUS SOCKET SMD 13.2 is the SMD male and female header kit that contains 10 sets 2 x 15Pin male and female headers. The spacing and number of holes are the same as the M-BUS on M5Core and M5Core2, allowing...

Note: All products are tax-inclusive. Proto Unit Case is the plastic case for Proto Unit. Include 4x Proto Unit Case 4x M2x5 Tapping Screw Specification Net Weight 13.0g Gross Weight 15.4g Product Size 48*24*8mm Package Size 67*53*12mm

Note: All products are tax-inclusive. Introducing the 1.27-Socket Kit for StampS3 - the perfect solution for enhancing your M5StampS3 experience! This high-quality header features a pitch of 1.27mm, specifically designed to seamlessly integrate with the M5StampS3 development board.With the 1.27-Socket Kit, users gain the flexibility to...

Note: All products are tax-inclusive. Capsule-proto is a prototyping perforated board specifically designed for M5Capsule. With a hole spacing of 2.54mm, it aims to simplify and accelerate the prototype development process, providing M5Capsule users with a convenient configuration platform to quickly validate concepts, test ideas,...

Get a FREE Deye SUN-M80G4-EU-Q0 800 Watt Micro Inverter with every order of SunLit BK215 Balkonkraftwerkspeicher!     Product Information: Output Power: 800 Watts (can be limited to 600 W) Maximum DC Power: 2×600 Watts Outdoor Use: IP67 protection class, designed to withstand tough weather...

Discover the APsystems EZ1-M Inverter (600/800 Watt) – The Perfect Addition to Your Balcony Power Plant The APsystems EZ1-M Inverter represents the latest innovation in micro inverter technology, specifically designed for balcony power systems and DIY solar projects. With its advanced technology and high...

Maximize your energy management with the Shelly Pro 3EM, the ideal tool for precise monitoring and control of your energy consumption needs. Shelly Pro 3EM is fully compatible with the SunLit BK215 Balcony Power Storage System. Here are the key product specifications and benefits...