Products
-
NVIDIA Jetson Xavier NX Dev Kit 16G eMMCNX Core Board Specifications Versions8 GB version16 GB version AI Performance21 TOPSGPUs 384-core NVIDIA Volta™ GPUs with 48 Tensor Cores CPU6-core NVIDIA Carmel ARM®v8.2 64-bit CPUs6MB L2 + 4MB L3 Memory 8 GB 128-bit LPDDR4x 59.7GB/s 16 GB 128-bit LPDDR4x 59.7GB/s Storage...
- €850,00 EUR
€850,00 EUR- €850,00 EUR
- Unit price
- per
Save €0,00 -
NVIDIA Jetson Xavier NX Dev Kit 8G eMMCNX Core Board Specifications Versions8 GB version16 GB version AI Performance21 TOPSGPUs 384-core NVIDIA Volta™ GPUs with 48 Tensor Cores CPU6-core NVIDIA Carmel ARM®v8.2 64-bit CPUs6MB L2 + 4MB L3 Memory 8 GB 128-bit LPDDR4x 59.7GB/s 16 GB 128-bit LPDDR4x 59.7GB/s Storage...
- €699,00 EUR
€699,00 EUR- €699,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 16-channel Servo Motor Drive Shield For ArduinoWhen we are doing robot experiments, it needs to use multiple PWM ports to drive the servo motor, however, the commonly used Arduino UNO R3 only has 6 PWM ports, so it is not enough. This allows you to use this expansion board, which...
- €19,90 EUR
€19,90 EUR- €19,90 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 1602LCD Keypad Shield For Arduino Raspberry PiOpenELAB LCD1602 expansion shield integrates a 1602 LCD display and six buttons into one piece, which is fully compatible with UNO R3 control board. It can work just through stacking expansion board on the key studio UNO R3 control board, which is very easy...
- €17,00 EUR
€17,00 EUR- €17,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 2.8 inch 240*320 TFT LCD Shield for Arduino UNO R3This is a key studio 2.8-inch TFT LCD shield with touchscreen. This TFT display is driven with an ILI9325 chip and has 240x320 pixels with individual RGB pixel control. This display has a resistive touchscreen attached to it already, so you can detect finger presses...
- €22,00 EUR
€22,00 EUR- €22,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 37 in 1 Box Sensor Kit V2.0 Mega Controller BoardThis is a 37 in 1 sensor learning kit for Arduino, rolled out by OpenELAB. Inside this kit are digital/analog sensors, as well as some special modules such as ultrasonic module, joystick, relay module and acceleration modules, etc. For each module, we provide a...
- €89,00 EUR
€89,00 EUR- €89,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 37 in 1 Sensor Kit Upgrade V3.0 with Gift BoxThis is an era of artificial intelligence. Artificial intelligence is everywhere and has been integrated into our lives, especially for all kinds of robots. To understand the robot, we should understand the control system of the robot. The microcontroller we learn is equivalent to...
- €42,50 EUR
€42,50 EUR- €42,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 3D MKS Gen V1.4 Printer Motherboard Control BoardThe OpenELAB 3D MKS Gen V1.4 Printer Mainboard Control Board combines and improves the advantages of RAMPS 1.4 and Arduino Mega 2560 boards, integrated into an excellent single board. It is the best control solution for Reprap 3D printers. The MKS Gen V1.4 mainboard...
- €39,50 EUR
€39,50 EUR- €39,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 3D printer controller RAMPS1.4 LCD 12864This is a LCD control panel used in 3D printer, an extension accessory of RAMPS.By using this panel, the printer can realize off-line printing function. That is to store the Gcode file of the 3D model to SD card, and then use the LCD...
- €18,85 EUR
€18,85 EUR- €18,85 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 3D printer kit MKS GEN V1.2 + 2004LCD+ 5x8825 + USB + adaptorThe new MKS Base 1.2 3D Printer Controller board combines and improves the assets of the RAMPS 1.4 and Arduino Mega 2560 boards on a fantastic single board solution. The MKS Base 1.2 is an optimal 3D printer controller solution for your Reprap 3D...
- €68,50 EUR
€68,50 EUR- €68,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 3D Printer Kit MKS GEN V1.2 + 5x 8825 + LCD12864The new MKS Base 1.2 3D Printer Controller board combines and improves the assets of the RAMPS 1.4 and Arduino Mega 2560 boards on a fantastic single board solution. The MKS Base 1.2 is an optimal 3D printer controller solution for your Reprap 3D...
- €74,50 EUR
€74,50 EUR- €74,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 3D Printer Kit RAMPS1.4 + Mega2560 + 5x A4988 + LCD 20041. OpenELAB Mega 2560 boardOpenELAB Mega 2560 R3 is a microcontroller board based on the ATMEGA2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a...
- €63,50 EUR
€63,50 EUR- €63,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 3D Printer Kit RAMPS1.4 + Mega2560 + 5xA4988 + LCD12864OpenELAB Mega 2560 board：OpenELAB Mega 2560 R3 is a microcontroller board based on the ATMEGA2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a...
- €66,50 EUR
€66,50 EUR- €66,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 3pcs 4988 Driver W/Heat Sink + USB cable for arduino CNCThis kit mainly includes a OpenELAB CNC V0.9A and three A4988 driver modules. OpenELAB CNC GRBL V0.9 is a main board developed by OpenELAB for CNC, laser engraving machine, writing robots and other robots. It has complete interfaces with cost-effective and can be driven...
- €29,90 EUR
€29,90 EUR- €29,90 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 3pcs A4988 driver+ Nano CH340 for Arduino CNCCNC shield v4.0 needs to work with OpenELAB nano ch340 . It can be used as driver expansion board for engraving machines. It has in total 3 channel slots for A4988 stepper motor driver modules (not included) for driving 3 channel of stepper motors....
- €29,90 EUR
€29,90 EUR- €29,90 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4 channel 5V Relay Shield module for Arduino UNO R3The OpenELAB relay shield has integrated a 4-channel 5V relay module, which is fully compatible with the UNO R3 control board. The 4-channel relay on the shield is active at HIGH level. Separately connect the 4-channel relay to the digital port 4, 5, 6, 7...
- €11,50 EUR
€11,50 EUR- €11,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4 Channel L298P Motor Drives Shield V1.0 for Arduino RobotThere are many ways to drive the motor. Our robot uses the most commonly used L298P solution. L298P is an excellent high-power motor driver IC produced by STMicroelectronics. It can directly drive DC motors, two-phase and four-phase stepping motors. The driving current up to...
- €25,00 EUR
€25,00 EUR- €25,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4*4*4 RGB LED Display CUBE Starter Kit for ArduinoOpenELAB 444 RGB LED CUBE KIT consist of 64 RGB LEDs soldered in the combination of 444. It’s then driven by ARDUINO. RGB LED CUBE emits a warm light, which is enjoyable for people of any age. You can also use it as a...
- €49,90 EUR
€49,90 EUR- €49,90 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 40 RGB LED WS2812 Pixel Matrix Shield for ArduinoOpenELAB 2812 shield adopts a stackable design, compatible with UNO board. It is an intelligent controlled LED light source that the control circuit and RGB chip are integrated in a 5050 SMD component. It includes intelligent digital port data latch and signal reshaping amplification...
- €18,00 EUR
€18,00 EUR- €18,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 48 in 1 Sensor Module Kit With Gift BoxThis sensor kit contains 48 kinds of commonly used sensor modules in playing the microcontroller, such as active buzzer module, 5V relay module, temperature and humidity module and so on. It is compatible with various microcontrollers and Raspberry Pi. At the same time, we...
- €75,00 EUR
€75,00 EUR- €75,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4DF Mechanical PS2 Joystick Metallic Robot ArmThis kit includes Arduino single-chip microcomputer, 2 joystick modules and 4 servos and so on. Next, we’ll teach you how to install and debug the robotic arm.There are three methods to control it as follows: First, we can a wired home-made joystick controller (included...
- €75,00 EUR
€75,00 EUR- €75,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4DOF Acrylic Toys Robot Mechanical Arm Claw KitWe OpenELAB R&D group rolls out an amazing 4DOF mechanical arm kit, which contributes to improving hands-on ability, logical thinking, and observation ability. It is easy to build to say the least. In fact, the four servos of this robot arm are controlled by...
- €65,00 EUR
€65,00 EUR- €65,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4DOF Mechanical Arm Robot Car Learning Starter KitMechanical arm, alike people’s arms, could execute a series of postures. At present, many mechanical arms can’t be operated flexibly because of the change of environment and distance. On tackling this problem, KEYES group has launched a 3 in 1 learning kit-4DOF mechanical robotic...
- €105,00 EUR
€105,00 EUR- €105,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4WD Mecanum Robot Car for Arduino STEMThis product not only facilitates the acquisition of programming knowledge for children, but also encompasses essential concepts in electronics, mechanics, control logic, and computer science. This programming kit is a cost-effective, user-friendly, and open-source solution designed for enthusiasts and professionals alike. Its installation and...
- €69,90 EUR
€69,90 EUR- €69,90 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4WD Mechanical Arm Robot Smart Car for ArduinoMechanical arm, featuring alike people’s arms, could execute a series of postures. At present, many mechanical arms are fixed style, which can’t be operated flexibly for environment and distance. On tackling this problem, KEYES group has launched a 3 in 1 learning kit-4WD mechanical...
- €99,90 EUR
€99,90 EUR- €99,90 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 4x4x4 RGB LED CUBE Electronic Kit For ArduinoRGB Cube Kit integrates Arduino programming and multiple sensing technology. This ulra-cool 4x4x4 RGB cube may boosts your inspiration to create various types of light shows. With multiple sensors and modules, like button module, photoresistor, potentiometer and sound sensor, users can learn deeper about...
- €48,50 EUR
€48,50 EUR- €48,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB 8833 Motor Driver Expansion Board PH2.0 USB Cable DC 6-9VThe 8833 motor driver expansion board uses PH2.0 terminals and an 8833 motor driver chip driven by the two-channel H bridge whose largest current can be up to be 1.5A. It also integrates an IR receiver, ultrasonic sensor ports, analog ports, line tracking interfaces,...
- €9,90 EUR
€9,90 EUR- €9,90 EUR
- Unit price
- per
Save €0,00 -
OpenELAB A4988 3D Printer Stepper Motor Driver CNC Shield for NanoOpenELAB CNC shield V4 is used as driving shield for engraving machines, fully compatible with NANO control board . So you just need to stack the Nano board onto the shield when using. It has total 3-way pin slots for stepper motor drive modules (Not...
- €9,85 EUR
€9,85 EUR- €9,85 EUR
- Unit price
- per
Save €0,00 -
OpenELAB A4988 Reprap Stepper Motor Driver + Heat Sink for 3D PrinterThis stepper motor driver is powered by A4988, a DMOS microstep driver with converter and overcurrent protection. It is available in full, half, 1/4, 1/8 and 1/16 stepping modes to operate bipolar stepper motors with output drive performance up to 35 V and ±...
- €7,95 EUR
€7,95 EUR- €7,95 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Acrylic Smart Solar Tracker System Tracking Starter KitThe solar tracking kit launched by KEYES is based on Arduino. It consists of 4 ambient light sensors, 2 DOF servos, a solar panel, and so on, aiming at converting light energy into electronic energy and charging power devices. It also boasts a charging...
- €79,00 EUR
€79,00 EUR- €79,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Advanced Starter Learning Kit for ArduinoOpenELAB REV4 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a...
- €58,00 EUR
€58,00 EUR- €58,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Automatic Watering System DIY Kit for ArduinoArduino automatic watering device, an open resource programming kit, makes teenagers acquire the practical knowledge of electronics, machinery, control logic and computer science easily. It is easy to build by slot connection, wooden boards, plus thirteen projects from simple to complex. Furthermore, the kids’...
- €89,00 EUR
€89,00 EUR- €89,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Balance Car ShieldThis key studio shield is particularly developed for balance cars based on Arduino development board. It mainly use the driver chip L298P produced by LGS Electronics, which is specially applied to large power motors. So the shield can drive two DC motors, and the...
- €15,50 EUR
€15,50 EUR- €15,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Balance Car Shield V3 for Arduino UNO R3You might envy those who can easily drive the gravity balance car on the street. So cool! How to DIY a mini balance car on your own? You can combine this shield with the UNO R3 control board to make a balanced car based...
- €15,50 EUR
€15,50 EUR- €15,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Basic Starter Kit for Arduino DIYOpenELAB kit is a learning kit for two programming methods, including Scratch graphical programming and C language programming based on Arduino. you can create numerous fascinating experiments with the PLUS mainboard， sensors， modules and electronic components. As many as 20 project tutorials are provided,...
- €22,00 EUR
€22,00 EUR- €22,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Basic Starter Kit for Arduino DIY with BoardOpenELAB kit is a learning kit for two programming methods, including Scratch graphical programming and C language programming based on Arduino. you can create numerous fascinating experiments with the PLUS mainboard，sensors，modules and electronic components. As many as 20 project tutorials are provided, which contain...
- €33,50 EUR
€33,50 EUR- €33,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Beetlebot 3 in 1 Robot for Arduino STEMThe Beetlebot smart robot, compatible with LEGO building blocks, is a STEM educational product which can automatically dodge obstacles, follow black lines and light to move. Besides, it has three cool forms such as the soccer robot, the siege robot, the handling robot. As...
- €87,00 EUR
€87,00 EUR- €87,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Bluetooth 4.0 Shield Expansion Shield BoardThe key studio Bluetooth 4.0 shield is an integration of sensor shield and HM-10 Bluetooth-4.0, fully compatible with UNO R3. So it is very easy to stack it onto the UNO R3 board.The shield has extended all the digital and analog pins out into...
- €13,95 EUR
€13,95 EUR- €13,95 EUR
- Unit price
- per
Save €0,00 -
OpenELAB bt-24 Wireless Bluetooths Module RS232 / TTL to UARTDX-BT24 5.1 Bluetooth module is built for intelligent wireless data transmission. It uses the DAILOG 14531 chip, configured with 256Kb space and follows the V5.1 BLE Bluetooth specification.Support AT instruction, users can change the serial port port rate, device name and other parameters as needed,...
- €8,80 EUR
€8,80 EUR- €8,80 EUR
- Unit price
- per
Save €0,00 -
OpenELAB CAN-BUS Shield MCP2515 chip With SD SocketOpenELAB CAN-BUS Shield is particularly designed for Arduino controllers.The onboard BUS control chip can realize the data control on the CAN bus and data communication between devices.It is compatible with the Arduino UNO standard interface; can be perfectly adapted to the main control boards...
- €11,50 EUR
€11,50 EUR- €11,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB CNC GRBL V0.9 Board for CNC/Laser engravingOpenELAB CNC GRBL V0.9 is a motherboard developed for various robots such as laser engraving, CNC, writing robot and so on. It has complete interfaces with cheap price, and can connect external drive, very suitable for DIY or factory use. Features Microprocessor：MEGA328p Input...
- €15,50 EUR
€15,50 EUR- €15,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Desktop Drawing Robot Writing RobotThis is a CoreXY writing machine. It is compatible with distinct styles fonts like hollow font, filled font and monoline fonts. A customized special signature is not a dreamy reverie for you. In addition, it can draw and outline sleek and beautiful lines. With...
- €129,00 EUR
€129,00 EUR- €129,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Desktop Mini Bluetooth Smart Robot Car Kit V3.0Today, we are introducing a fascinating programmable smart car that allows children to easily learn programming while gaining practical knowledge in electronics, mechanics, control logic, and computer science. This robot is based on the open-source ARDUINO platform, with very simple assembly and wiring. All...
- €66,90 EUR
€66,90 EUR- €66,90 EUR
- Unit price
- per
Save €0,00 -
OpenELAB DIY 4-DOF Robot Kit Frog Robot for ArduinoThis kit provides a perfect opportunity to build your very first robot, and it makes the process of learning about robotics easy, interactive, and FUN! The kit is based on the OpenELAB nano ch340, compatible with both Arduino open-source platform and Mixly Blocks coding....
- €61,00 EUR
€61,00 EUR- €61,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB DIY Electronic Watering Kit Sensors Module KitAs for some plant lovers, they are keen on spending time in caring for their plants. Yet if they are busy in your work or entertainment, plants may wither by virtue of lacking water. To avoid this, we launched an automatic watering device with...
- €55,00 EUR
€55,00 EUR- €55,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB DIY Mini Tank V2.0 Smart Robot Car KitThe OpenELAB team has developed a mini tank robot equipped with a programmable processor that utilizes the Arduino Integrated Development Environment (IDE). This design integrates a shield that connects to the processor, enabling the mapping of pins to various sensors and actuators. The robot...
- €69,90 EUR
€69,90 EUR- €69,90 EUR
- Unit price
- per
Save €0,00 -
OpenELAB DMX (RDM)Shield Control Speakers Light Smoke MachineThis DMX(RDM) shield is designed for Arduino. Its working voltage is 5V and has 0.5W power consumption.It can transmit and receive DMX through Arduino so as to control speakers, light and smoke machines. If you get tired of the programming language, you also can...
- €18,50 EUR
€18,50 EUR- €18,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB Drone Solutionsthe QX-30 and QX-50 Cleaning Drones: The cleaning drone by OpenELAB offers a safer and eco-friendly solution for cleaning photovoltaic panels and exterior walls. Its high-precision navigation and advanced control systems eliminate the need for risky scaffolding or ladders, ensuring thorough cleaning with minimal environmental...
- €9.999,00 EUR
€9.999,00 EUR- €9.999,00 EUR
- Unit price
- per
Save €0,00 -
OpenELAB EASY PLUG 2812 2x2 Full Color RGB ModuleEASY plug 2812 2x2 full color RGB module is a smart external control LED light source that integrates control circuit and lighting circuit. Each LED has the same appearance as a 5050 LED bead, and each component is a pixel point. The pixel point...
- €7,50 EUR
€7,50 EUR- €7,50 EUR
- Unit price
- per
Save €0,00 -
OpenELAB EASY PLUG 3W LED Module for ArduinoThis is a high-power LED module. The main function is to turn on or off a plugin LED. It has features of supper bright and high power, and is compatible with EASY plug Control board V2.0. For easy wiring, the module’s 3 pins are...
- €6,20 EUR
€6,20 EUR- €6,20 EUR
- Unit price
- per
Save €0,00
