
Espressif ESP8684 WROOM 03 ESP32 C2 Module
📦 Location of the warehouse: China
Free shipping for you
Free Shipping from 30€ in Germany, 50€ in the EU!
Trustpilot rating: 4.4/5.0
Thank you for your support - rate us on Trustpilot!

Espressif ESP8684 WROOM 03 ESP32 C2 Module
ESP8684-WROOM-03 is a general-purpose Wi-Fi and Bluetooth LE module. The rich set of peripherals and high performance make this module an ideal choice for smart homes, industrial automation, health care, consumer electronics, etc. ESP8684-WROOM-03 can be vertically soldered to a PCB board via wave soldering. The module has 8 available GPIOs. ESP8684-WROOM-03 comes with a PCB antenna. The ESP8684H2 chip and the ESP8684H4 chip fall into the same category, namely ESP8684 chip series. ESP8684 integrates a rich set of peripherals including UART, I2C, LED PWM controller, general DMA controller, temperature sensor, and SAR ADC etc.
Features
CPU and On-Chip Memory
- ESP8684H2 or ESP8684H4 embedded, 32-bit RISC-V single-core processor, up to 120 MHz
- 576 KB ROM
- 272 KB SRAM (16 KB for cache)
- In-Package flash
- Access to flash accelerated by cache
- Supports flash in-Circuit Programming (ICP)
Wi-Fi
- IEEE 802.11 b/g/n-compliant
- Center frequency range of operating channel: 2412 ~ 2484 MHz
- Supports 20 MHz bandwidth in 2.4 GHz band
- 1T1R mode with data rate up to 72.2 Mbps
- Wi-Fi Multimedia (WMM)
- TX/RX A-MPDU, TX/RX A-MSDU
- Immediate Block ACK
- Fragmentation and defragmentation
- Transmit opportunity (TXOP)
- Automatic Beacon monitoring (hardware TSF)
- 3 × virtual Wi-Fi interfaces
- Simultaneous support for Infrastructure BSS in Station mode, SoftAP mode,Station + SoftAP mode, and promiscuous mode. Note that when ESP8684 series scans in Station mode, the SoftAP channel will change along with the Station channel
Bluetooth®
- Bluetooth LE: Bluetooth 5
- High power mode (20 dBm)
- Speed: 125 kbps, 500 kbps, 1 Mbps, 2 Mbps
- Advertising extensions
- Multiple advertisement sets
- Channel selection algorithm #2
- Internal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna
Peripherals
- GPIO, SPI, UART, I2C, LED PWM controller, general DMA controller, temperature sensor, SAR ADC, timers and watchdog
Integrated Components on Module
- 26 MHz crystal oscillator
Antenna Options
- On-board PCB antenna
Operating Conditions
- Operating voltage/Power supply: 3.0 ~ 3.6 V
- Operating ambient temperature: –40 ~ 105 °C
Effective Date: March 27, 2025
At OpenELAB, we are committed to providing accurate product descriptions and delivering high-quality products. If you experience any issues with your purchase, please notify us within 60 days of the shipment date.
1. Warranty Disclaimer
Unless explicitly stated in a specific agreement or purchase order, OpenELAB makes no warranties—express or implied—regarding the fitness, suitability, or merchantability of any product for a particular purpose or special use.
2. Warranty Policy
Warranty Period
The standard warranty period for products sold by OpenELAB is 12 months from the date of delivery.
Under this warranty, OpenELAB will make a reasonable effort to repair or replace products free of charge if defects are due to issues with raw materials, design, or manufacturing.
If the defect qualifies under this policy but falls outside the covered scope, reasonable charges may apply for repair or replacement.
After the warranty period, support may still be available at a reasonable fee.
Warranty Exclusions
The warranty does not apply in the following cases:
- The product is beyond the 12-month warranty period.
- Damage due to misuse, improper maintenance or storage, or failure to follow the user guide or manual.
- Issues caused by Force Majeure events (e.g., natural disasters, war, legal changes, etc.).
- Unauthorized repair attempts by the customer.
- The product is not defective but has been opened and is non-returnable by policy.
3. Returns & Refunds
If you're not satisfied with your purchase, you may be eligible for a return or exchange:
- Return for Refund: Within 15 days of receipt (unopened).
- Return for Replacement: Within 30 days of receipt (damaged or defective).
- Exchange Window: Up to 30 days from receipt.
Please email us at info@openelab.io for a return authorization before sending anything back.
Return Conditions
- Items must be in original, clean, and mint condition with packaging intact.
- Returns of damaged, used, scratched, modified, or programmed items will not be accepted.
- Include the receipt, a brief note with your name, order number, and reason for return.
Shipping & Fees
- Customers are responsible for return shipping to our warehouses in Europe, the US, or China.
- Refunds may be subject to additional shipping fees unless the return is due to our error.
- A flat €8 shipping fee will be deducted for returned items that originally qualified for free shipping.
Payment Platform Fees
For refunds processed through third-party platforms such as PayPal or Braintree, a standard 3.5% service fee may be deducted to cover payment processing costs.