copper tin removal tape, Desoldering Wicks Removal Tool Solder Sucker,Length 1.5m
📦 Location of the warehouse: China
Free shipping for you
Free Shipping from 30€ in Germany, 50€ in the EU!
Trustpilot rating: 4/5
Thank you for your support - rate us on Trustpilot!
copper tin removal tape, Desoldering Wicks Removal Tool Solder Sucker,Length 1.5m
Made from pure copper refined with special chemicals, ensuring good, fast, and efficient performance during use.
Used for removing excess solder during desoldering, resistant to oxidation and corrosion, with good thermal conductivity and excellent tin absorption, ensuring clean solder removal.
A desoldering braid is a woven metal wire that utilizes capillary action to absorb molten solder. It is used to remove excess solder during desoldering, resistant to oxidation and corrosion, with good thermal conductivity and tin absorption, ensuring clean solder removal. It is used for clearing solder joints on circuit boards and is commonly used with a soldering station.
The desoldering braid is made from pure copper and refined with a special chemical formula, ensuring it is fast, efficient, and effective. It absorbs excess solder during desoldering, is resistant to oxidation and corrosion, has excellent thermal conductivity and tin absorption, and provides clean solder removal. During desoldering, once a chip is removed, there is often a large amount of solder left on the circuit board, which can interfere with chip re-soldering. Desoldering braids are typically used to clean up the solder. The method involves placing a soldering iron on the desoldering braid and moving it slowly over the chip pads. Once the solder melts, it is absorbed by the braid, clearing the solder between the pins. This leaves the circuit board clean. Afterward, cleaning fluid is used to clean the chip area on the board.
The desoldering braid can be used for larger surface-mount components. Among desoldering tools, a desoldering pump is suitable for general components like aluminum electrolytic capacitors, while the desoldering braid is better for larger surface-mount components. It requires no cleaning, and after each use, simply cut off the used portion for reuse.
Note: To prevent burns during use, avoid direct contact with the desoldering braid. Hold it by the casing or use tweezers or other tools to handle it.
Product Parameters
|
Model |
Width (mm) |
Length (m） |
|
4015 |
4.0mm |
1.5m |
|
3515 |
3.5mm |
1.5m |
|
3015 |
3.0mm |
1.5m |
|
2515 |
2.5mm |
1.5m |
|
2015 |
2.0mm |
1.5m |
|
1515 |
1.5mm |
1.5m |
|
1015 |
1.0mm |
1.5m |
Effective Date: March 27, 2025
At OpenELAB, we are committed to providing accurate product descriptions and delivering high-quality products. If you experience any issues with your purchase, please notify us within 60 days of the shipment date.
1. Warranty Disclaimer
Unless explicitly stated in a specific agreement or purchase order, OpenELAB makes no warranties—express or implied—regarding the fitness, suitability, or merchantability of any product for a particular purpose or special use.
2. Warranty Policy
Warranty Period
The standard warranty period for products sold by OpenELAB is 12 months from the date of delivery.
Under this warranty, OpenELAB will make a reasonable effort to repair or replace products free of charge if defects are due to issues with raw materials, design, or manufacturing.
If the defect qualifies under this policy but falls outside the covered scope, reasonable charges may apply for repair or replacement.
After the warranty period, support may still be available at a reasonable fee.
Warranty Exclusions
The warranty does not apply in the following cases:
- The product is beyond the 12-month warranty period.
- Damage due to misuse, improper maintenance or storage, or failure to follow the user guide or manual.
- Issues caused by Force Majeure events (e.g., natural disasters, war, legal changes, etc.).
- Unauthorized repair attempts by the customer.
- The product is not defective but has been opened and is non-returnable by policy.
3. Returns & Refunds
If you're not satisfied with your purchase, you may be eligible for a return or exchange:
- Return for Refund: Within 15 days of receipt (unopened).
- Return for Replacement: Within 30 days of receipt (damaged or defective).
- Exchange Window: Up to 30 days from receipt.
Please email us at info@openelab.io for a return authorization before sending anything back.
Return Conditions
- Items must be in original, clean, and mint condition with packaging intact.
- Returns of damaged, used, scratched, modified, or programmed items will not be accepted.
- Include the receipt, a brief note with your name, order number, and reason for return.
Shipping & Fees
- Customers are responsible for return shipping to our warehouses in Europe, the US, or China.
- Refunds may be subject to additional shipping fees unless the return is due to our error.
- A flat €8 shipping fee will be deducted for returned items that originally qualified for free shipping.
Payment Platform Fees
For refunds processed through third-party platforms such as PayPal or Braintree, a standard 3.5% service fee may be deducted to cover payment processing costs.
