Dev Board - ESP32 / ESP8266

Features Espressif official ESP32-WROOM-32module Lastest ESP32 Version: REV1 4MB FLASH Lithium battery interface,500mA Max charging current Compatible with Arduino,MicroPython Defaultfirmware: lastest MicroPython Tutorials GetstartedwithMicroPython[D32series] GetstartedwithArduino[D32series] Documentation SchematicV1.0.0[PDF] DimensionV1.0.0[PDF] CH340Driver Technicalspecs OperatingVoltage    3.3V SupportedBattery    Lipo3.7V BatteryConnector    PH-22.0mm DigitalI/OPins    22 AnalogInputPins    6(VP,VN,32,33,34,35) AnalogOutputPins    2(25,26) LED_BUILTIN    GPIO5...

The ESP-WROOM-02 SMD module is available in a form factor of (18.00 ± 0.20) mm x (20.00 ± 0.20) mm x (2.80 ± 0.15) mm and is currently configured as a SPI Flash in a SOP 8 (150 mil) package with a 2 dBi...

The ESP8685-WROOM-07 is a general-purpose Wi-Fi and low-power Bluetooth (Bluetooth LE) module with powerful features for smart home, industrial automation, healthcare, consumer electronics, and more. The ESP8685-WROOM-07 can be vertically inserted onto a PCB board using wave soldering, and has 3 available GPIOs.The ESP8685-WROOM-07...

The ESP8685-WROOM-05 is a general-purpose Wi-Fi and low-power Bluetooth (Bluetooth LE) module with powerful features for smart home, industrial automation, healthcare, consumer electronics and more. The ESP8685-WROOM-05 features a PCB board-mounted antenna, which can be used either surface mounted or through a pin connection....

The ESP8685-WROOM-01 is a general-purpose Wi-Fi and low-power Bluetooth (Bluetooth LE) module with powerful features and a rich set of peripheral interfaces for smart home, industrial automation, healthcare, consumer electronics, and other applications. The ESP8685-WROOM-01 features a PCB board-mounted antenna, which can be surface-mounted...

The ESP32-C3 series chips are equipped with a RISC-V 32-bit single-core processor. The ESP32-C3 series chips integrate a rich set of peripherals, including UART, I2C, I2S, infrared remote control peripheral, LED PWM controller, general-purpose DMA controller, TWAI® controller, USB serial/JTAG controller, temperature sensor and...

Integrated ESP32-C3 chip, RISC-V 32-bit single-core processor clocked at up to 160 MHzIndustry-leading low-power performance and RF performanceBuilt-in 400 KB SRAM, 384 KB ROM memory, and support for multiple external SPI, Dual SPI, Quad SPI, QPI flashComprehensive security mechanisms: secure boot based on RSA-3072...

Product Features WiFi - Supports IEEE 802.11 b/g/n protocols - Supports 20 MHz bandwidth in 2.4 GHz band - Supports 1T1R mode with data rates up to 72.2 Mbps - Wireless Multimedia (WMM) - Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU) - Immediate Block ACK...

The ESP32-S3 is a low-power MCU system-on-chip (SoC) that supports 2.4 GHz Wi-Fi and Bluetooth® LE wireless communication.The chip integrates a high-performance Xtensa® 32-bit LX7 dual-core processor, an ultra-low-power co-processor, Wi-Fi baseband, Bluetooth baseband, RF module, and peripherals.Wi-Fi baseband, Bluetooth baseband, RF module, and...

The ESP8266EX has a complete and self-contained Wi-Fi network function that can be used either standalone or as a slave running on other host MCUs. The ESP8266EX can boot directly from an external flash when used standalone. The built-in high speed buffer memory facilitates...

Features Wi-Fi• IEEE 802.11 b/g/n-compliant• Supports 20 MHz, 40 MHz bandwidth in 2.4GHz band• Single-band 1T1R mode with data rate up to 150Mbps• WMM• TX/RX A-MPDU, RX A-MSDU• Immediate Block ACK• Fragmentation and defragmentation• Automatic Beacon monitoring (hardware TSF)• 4 × virtual Wi-Fi interfaces•...

Features Wi-Fi• IEEE 802.11 b/g/n-compliant• Supports 20 MHz, 40 MHz bandwidth in 2.4 GHz band• Single-band 1T1R mode with data rate up to 150 Mbps• WMM• TX/RX A-MPDU, RX A-MSDU• Immediate Block ACK• Fragmentation and defragmentation• Automatic Beacon monitoring (hardware TSF)• 4 × virtual Wi-Fi interfaces•...

Features CPU and On-Chip Memory• ESP8685H4 embedded, 32-bit RISC-V singlecore processor, up to 160 MHz• 384 KB ROM• 400 KB SRAM (16 KB for cache)• 8 KB SRAM in RTC• 4 MB flash in chip packageWi-Fi• IEEE 802.11 b/g/n-compliant• Center frequency range of operating...

Features Wi-Fi• IEEE 802.11b/g/n-compliant• Supports 20 MHz, 40 MHz bandwidth in 2.4 GHz band• 1T1R mode with data rate up to 150 Mbps• Wi-Fi Multimedia (WMM)• TX/RX A-MPDU, TX/RX A-MSDU• Immediate Block ACK• Fragmentation and defragmentation• Transmit opportunity (TXOP)• Automatic Beacon monitoring (hardware TSF)•...

Carenuity Original C3-Mini v2.2.1 Development Board, Limited EURO Edition, Designed in Ukraine. Based on the powerful ESP32-C3 chipset, this board offers a world of possibilities for IoT developers and hobbyists. With 4MB of flash memory and the ability to be programmed using the Arduino...

The ESP32-C6-WROOM-1-N8 is an entry-level RISC-V microcontroller development board. Compact yet powerful, it features a variety of peripheral interfaces and is suitable for applications in smart homes, industrial automation, healthcare, and consumer electronics. The board supports development with the official ESP-IDF environment, offering example programs and...

ESP8266EX is a low-power 32-bit microcontroller chip with integrated Wi-Fi functionality from Loxin Technology (Espressif), which is widely used in IoT devices. It has a built-in Tensilica L106 32-bit processor with a clock frequency up to 160 MHz and a rich set of peripheral...

With the ESP8266-01S relay module you have the possibility to switch a relay comfortably via WLAN. With the help of free firmware, the module can be integrated into existing networks, without any programming knowledge! The powerful ESP-01S with 1 MB memory and 80 MHz...

Set consisting of one ESP8266-01S and one USB adapter! Large range through Wlan 802.11 b/g/n standard! Universal use thanks to three available operating modes: Wlan Router (AP), Wlan Client (STA) and both at the same time (AP + STA)! Thanks to powerful 80MHz processor...

Product DescriptionESP32-WROOM-32E and ESP32-WROOM-32UE are two powerful, generic WiFi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. Specification

The ESP32-WROOM-32 is a high-performance Wi-Fi + Bluetooth® + Bluetooth LE MCU module designed for low-power IoT applications, making it ideal for smart home, industrial automation, and wireless sensor networks. Powered by the ESP32-D0WDQ6 chip, this module offers scalable and flexible computing power with...

Product Description   Brief Introduction The ESP32-S3-WROOM-1 and ESP32-S3-WROOM-1U are two powerful general-purpose Wi-Fi + Bluetooth LE MCU modules built on the ESP32-S3 family of SoCs. In addition to a rich set of peripherals, the neural network computation and signal processing workload acceleration provided...

Specification Details   Block Diagram   Schematic   Pin Description   Package  

Product Description Brief Introduction ESP32-H2 is an ultra-low-power Internet of Things(loT)solution offering multiple protocol support on a single chip. It integratesa 2.4 GHz transceiver compliant with Bluetooth ® Low Energy and IEEE 802.15.4-based technologies, supportingBluetooth5(LE),Bluetooth mesh,Thread,Matter,and Zigbee. It has: Main Parameters

Brief IntroductionThe ESP32-C6 SoC (System on Chip) supports Wi-Fi 6 in 2.4 GHz band, Bluetooth 5, Zigbee 3.0 and Thread 1.3. It consists of a high-performance (HP) 32-bit RISC-V processor, a low-power (LP) 32-bit RISC-V processor, wireless baseband and MAC (Wi-Fi,Bluetooth LE, and 802.15.4),...

ESP32-WROOM-32 is a general-purpose WiFi+BT+BLE MCU module, featuring low-power Bluetooth and Wi-Fi. It is widely applicable, integrating SPI flash memory and supporting a wide range of wireless communication connections. It supports direct connection to the Internet through a router, while Bluetooth allows users to...

The ESP-WRoom-32 is a powerful, versatile Wi-Fi + BT + BLE microcontroller module, widely used in low-power sensor networks and high-demand tasks such as voice encoding, audio streaming, MP3 decoding, and more. The module features the ESP32-DOWDQ6 chip, known for its scalability and adaptability,...

The D1 Mini NodeMCU is a small development board based on the powerful ESP8266-12F WLAN module, equipped with a Micro-USB/USB TYPE-C interface and CH340G driver for easy connection and programming. Due to its compact size, this NodeMCU is particularly popular among developers. It features built-in...