10% off

Note: All products are tax-inclusive. FlashLight unit is an I/O Unit that incorporates a built-in flash with a white LED and an AW3641 driver. The white LED has a color temperature ranging from 5000K to 5700K, providing a cool white light output. The unit...

Note: All products are tax-inclusive. Frame like its namesake, is a frame for M5Core. It gives you an extra structure supporting or containing M5Core.   Include 2x FRAME Panel Set 8x hexagon screw KA2x4 2x HEX KEY   Specification Resources Parameter Net weight 20g Gross...

Note: All products are tax-inclusive. The Gesture Unit is a touchless 3D gesture recognition sensor that utilizes the I2C interface and integrates with the PAJ7620U2 chip. It enables the detection and recognition of various gestures without the need for physical touch.By default, the Gesture Unit...

Note: All products are tax-inclusive. The Glass Unit is a transparent OLED expansion screen unit with a size of 1.51 inches. It is designed to provide a monochrome display with a resolution of 128x64 pixels. The transparent area of the screen measures 128x56 pixels,...

Note: All products are tax-inclusive. Glass2 Unit is a 1.51-inch transparent OLED display unit that adopts the SSD1309 driver solution. It supports the I2C communication interface (default address 0x3C) and has a built-in solder pad that allows changing the communication address to 0x3D. It is...

recommend the updated version: M5Stack GPS/BDS Unit with SMA Antenna (AT6668) Relevant Information: Comparing GPS/BDS Unit v1.1 and Unit-GPS SMA GPS Unit v1.1 is a GNSS Global Positioning System navigation unit that integrates CASIC's high performance navigation chip AT6668 and signal amplifier chip MAX2659,...

Unit-GPS SMA is a GNSS global positioning and navigation unit that integrates Microelectronics' high performance ATGM336H navigation module based on the AT6668 chip design. It is equipped with an external active antenna, providing more accurate and reliable satellite positioning services. Compared to previous models,...

Note: All products are tax-inclusive. GRBL 13.2 is a three-axis stepper motor driver module in the M5Stack stacking module series. It uses an ATmega328P-AU controller with three sets of DRV8825PWPR stepper motor driver chip control ways, which can drive three bipolar steppers at the same...

Note: All products are tax-inclusive. Grove2Dupont is a conversion cable between Male HY2.0-4P connector to 2.54 Male/Female Dupont cables. Cable length: 20cm. Each SKU includes 5 pairs of cables. Includes 5x Grove - Male dupont cables, 20cm 5x Grove - Female Dupont cables, 20cm...

Note: All products are tax-inclusive. Meet the HBridge v1.1 Unit – a state-of-the-art DC motor drive module that redefines motor control. Powered by the "STM32F030+RZ7899" scheme, this module enables seamless I2C communication with the M5 host, offering precise PWM control for speed adjustment, as well as easy management of forward, reverse, and...

Note: All products are tax-inclusive. You are what you wear! Our M5 Hoodies come in a plethora of designs with logos and graphics. We offer these hoodies in different configurations….black and blue color! Get geeky with cool designs and popular logos that are sure...

Note: All products are tax-inclusive. PbHUB Unit is a versatile 6-channel expansion unit that allows for easy expansion and control of various functionalities. With I2C control, it seamlessly integrates with compatible devices and systems, providing a convenient and efficient solution for expanding capabilities.Each Port B...

Note: All products are tax-inclusive. Joystick is a control input unit that is designed to provide joystick functionality in various applications. It utilizes the I2C communication interface for seamless integration with other devices and systems. The Joystick unit supports three-axis control signal input, specifically X...

Note: All products are tax-inclusive. PaHUB2 unit is an I2C Expandable Hub specifically designed to overcome the limitation of a single I2C interface. It enables the expansion of a single I2C HY2.0-4P interface to accommodate up to 6 additional I2C channels.By employing polling control on...

Note: All products are tax-inclusive. IoT BASE Cat-M is a functional base designed for IoT data transmission. The internal 'SIM7080G' module supports both 'CAT-M' and 'NB-IoT' modes with global coverage. This functional base includes I2C + UART + GPIO + RS485 + Battery-power ports, with...

Note: All products are tax-inclusive. JoyC is a joystick module designed specifically for the M5StickC, allowing for dual-handed operation. It is embedded with an STM32F030F4 microcontroller chip and communicates with M5StickC via the I2C communication protocol. The joystick has a range of 0 to 200,...

Note: All products are tax-inclusive. LAN Module 13.2 is a powerful Ethernet controller module that integrates the W5500 hardware TCP/IP embedded Ethernet controller (via SPI communication interface). It supports multiple communication protocols and is suitable for various applications such as industrial automation, Internet of Things...

Note: All products are tax-inclusive. LAN PoE BASE V12 is an Ethernet control module that integrates PoE (Power Over Ethernet) function. Adopt W5500 full hardware TCP/IP embedded Ethernet controller (SPI communication interface) scheme, support multiple communication protocols (TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE, etc.) Network packet processing. Internally reserved...

Note: All products are tax-inclusive. The Limit Unit is a limit switch sensor designed to provide limit protection in various mechanical equipment applications. When the switch bar of the unit is pressed or activated, it triggers a change in the digital signal from 3.3V to...

Note: All products are tax-inclusive. LoRa868 is a LoRa communication module in the M5Stack stack module series (working frequency is 868MHz). A certain expansion space is reserved on the module, which defeats you for a more functional design. For wireless communication or projects with more...

Note: All products are tax-inclusive. Module LLM is an integrated offline Large Language Model (LLM) inference module designed for terminal devices that require efficient and intelligent interaction. Whether for smart homes, voice assistants, or industrial control, Module LLM provides a smooth and natural AI experience...

Note: All products are tax-inclusive. The LoRaE220-433 Unit is a 433MHz LoRa communication module released by M5Stack, utilizing the LLCC68 chip solution. Compared to the traditional SX1278 solution, the LLCC68 offers advantages such as longer transmission distance, faster speed, and lower power consumption. This unit supports...

Note: All products are tax-inclusive. The LoRa433_V1.1 Module is a LoRa communication module within the M5Stack stacking module series, operating at a frequency of 433MHz and utilizing the Ra-02 module (chip SX1278) solution. This module comes standard with an external SMA antenna and also reserves two patch MCX antenna socket...

Note: All products are tax-inclusive. The Unit-LoRaE220 is a LoRa communication module introduced by M5Stack, designed for the 920MHz frequency band. It utilizes convenient serial communication. It supports point-to-point transmission and broadcast modes, as well as wireless wake-up, carrier monitoring, and communication key features....

Note: All products are tax-inclusive. Let‘s dive into the details of the M5Atom Joystick, a versatile programmable remote controller designed for various applications:     1. Main Controller (AtomS3): The AtomS3 serves as the central processing unit for the M5Atom Joystick. Additionally, an STM32 co-processor handles specific...

Note: All products are tax-inclusive. M5GO BOTTOM2 is an expansion base designed for M5Core2. It integrates an MPU6886 6-axis gyro/accelerometer, digital mic(SPM1423), and 500mAh LiPo battery. The base also includes 2 HY2.0-4P expansion ports capable of ADC/DAC/UART protocols and data input/output, which allows the use...

Note: All products are tax-inclusive. Discover the native features and applications of the M5Stack Dial product. Click the link below for an exclusive preview! What do you know about M5Stack Dial？ – OpenELAB The M5Dial is a super handy embedded development board that's got...

Note: All products are tax-inclusive. M5GO IoT Starter Kit v2.7 is an affordable and comprehensive development kit designed for IoT enthusiasts. This kit offers everything you need to kickstart your IoT projects. The kit includes the Core Controller M5GO, along with six expansion units featuring...

Note: All products are tax-inclusive. M5Stack just added a new family to its popular series of modules with the Stamp-C3. the new Stamp-C3 featuring ESPRESSIF ESP32-C3 RISC-V MCU with Wi-Fi connectivity for IoT edge devices such as home appliances and Industrial Automation. Combining RSA-3072-based secure boot and the...

Note: All products are tax-inclusive. M5GO CHARGER is a charger base for the M5GO Lite kit, M5GO IoT Kit, and FIRE. Include 1x M5GO CHARGER Type-C USB cable Specification Resources Parameter Net weight 19g Gross weight 67g Product Size 54*54*8mm Package Size 95*65*25mm

Note: All products are tax-inclusive. The new M5Stamp C3U features ESPRESSIF ESP32-C3 RISC-V MCU, with Wi-Fi 5 (LE) connectivity, applicable for home appliances and Industrial Automation. By combining RSA-3072-based secure boot and the AES-128-XTS-based flash encryption. The compact size and powerful functions, make it...

Note: All products are tax-inclusive. Includes M5Stamp Fly x 1 M5Atom Joystick x 1   M5Stamp Fly The M5Stamp Fly is an exciting programmable open-source quadcopter kit that offers a range of features for drone enthusiasts and developers. Let’s break down its key components: Main Controller...

Note: All products are tax-inclusive. STAMPS3 is a highly integrated embedded controller designed for IoT applications. It utilizes the Espressif ESP32-S3FN8 main control chip and features 8MB of SPI flash memory. Powered by a high-performance Xtensa 32-bit LX7 dual-core processor, STAMPS3 delivers impressive processing power with...

Note: All products are tax-inclusive. The M5Stamp Fly is an exciting programmable open-source quadcopter kit that offers a range of features for drone enthusiasts and developers. Let’s break down its key components: Main Controller (StampS3): The StampS3 serves as the central brain of the quadcopter. It integrates a BMI270...

Note: All products are tax-inclusive. StampISP is an ESP32 programming tool with USB to serial port in STAMP series package, using CH9102 chip inside, and built-in 3.3V DCDC circuit, 5V power supply and USB D+/D- signal line led out on the side of the...

Note: All products are tax-inclusive. M5StampS3 PIN1.27 is a highly integrated embedded Controller. Same as StampS3, this controller leverages the power of the ESP32-S3FN8 chip, featuring an impressive 8MB SPI flash memory for ample storage capacity. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor,...

Note: All products are tax-inclusive. T-Lite is a thermal camera with an online detection function, the product is mainly composed of M5StickC-PLUS and UNIT THERMAL, using MLX90640-BAA infrared imaging sensor. As an esp32 cam, it uses ESP32-PICO-D4 chip, with WIFI function, 135*240 resolution TFT screen, built-in 160mAh battery, its "T-Lite" The T in the name stands for...

Note: All products are tax-inclusive. 8Servos HAT v1.1 is an 8-channel servo driver module designed specifically for use with the M5StickC/C Plus series. It utilizes an STM32F030F4 microcontroller as the main controller to generate PWM (Pulse Width Modulation) signals for driving servos.The module communicates with...

Note: All products are tax-inclusive. ADC V1.1 Unit is an A/D conversion module that utilizes the ADS1110 chip, a 16-bit self-calibrating analog-to-digital converter. It is designed with an I2C interface, offering convenient connectivity. The module offers conversion speeds of 8, 16, 32, and 128 samples...

Note: All products are tax-inclusive. DAC2 Hat is an I2C digital-to-analog signal conversion unit designed to be compatible with the StickC series controllers. It offers high precision and accuracy in its performance by using the GP8413 solution. This chip can linearly convert a 15-bit digital...

Note: All products are tax-inclusive. FINGER HAT is a fingerprint recognition sensor designed for M5StickC. It integrates the FPC1020SC capacitive fingerprint recognition module, offering features such as multi-fingerprint enrollment, image processing, feature extraction, fingerprint matching, and search capabilities. With UART communication protocol and a compact...

Note: All products are tax-inclusive. ENV III HAT is a multifunctional environmental sensor module designed to be compatible with the M5StickC series. It integrates two sensors, namely the SHT30 and QMP6988, to provide temperature, humidity, and atmospheric pressure data.The SHT30 sensor, with an I2C address...

Note: All products are tax-inclusive. DLight HAT is a digital ambient light sensor module designed to extend the ambient light sensing capability of the M5StickC/C Plus. It incorporates the BH1750FVI sensor, which communicates using the I2C interface, and includes a 16-bit analog-to-digital converter (ADC).The BH1750FVI...

Note: All products are tax-inclusive. PIR is a human body infrared unit. It belongs to the "passive pyroelectric infrared detector". It detects the infrared radiation emitted and reflected by the human body or object. When infrared is detected, the output level is high and it...

Note: All products are tax-inclusive. The M5Stack M5StickC PLUS2 with Watch Accessories is a compact and versatile IoT development kit, now upgraded for enhanced performance. Featuring the M5StickC PLUS2 core, it offers powerful functionality, including Wi-Fi, infrared communication, and Bluetooth 4.2. The upgraded CH9102...

Note: All products are tax-inclusive. SERVO HAT is a servo motor module designed specifically for M5StickC. It features the ES9251II servo model, which provides a motion range of 145°±10°. The rotation angle is controlled using PWM (Pulse Width Modulation), ensuring precise control over the servo's movement. The signal...

Note: All products are tax-inclusive. ToF HAT is a high-precision laser ranging sensor specifically designed for the M5StickC. It integrates the ST VL53L0X laser ranging chip and a 940nm VCSEL transmitter. By measuring the round-trip time of the laser signal to the target object, it...

Note: All products are tax-inclusive. M5Stack is so excited to announce the launch of the new AIoT Camera! It's powered by Kendryte K210, an edge computing system-on-chip (SoC) with a dual-core 64-bit RISC-V CPU and an advanced neural network processor. The M5Stick V AI...

Note: All products are tax-inclusive. The M5 Magnetic Type-C Cable is a Type-C data cable with a magnetic plug. Its magnetic design not only facilitates device connection but also significantly reduces interface wear, thereby extending the cable's service life. In the event of accidental pulling,...

Note: All products are tax-inclusive. Key unit is a compact mechanical key input unit that incorporates a range of features for enhanced functionality and versatility. It is designed as a single key input device with a built-in RGB LED, providing both input and visual feedback...