M5Stack Din Meter w/ M5StampS3
📦 Location of the warehouse: China
Free shipping for you
Free Shipping from 30€ in Germany, 50€ in the EU!
Trustpilot rating: 4/5
Thank you for your support - rate us on Trustpilot!

M5Stack Din Meter w/ M5StampS3
Din Meter is a1/32 DIN standard embedded development board equipped with a 1.14-inch ST7789 screen and powered by an M5StampS3 as its main controller. It features a built-in rotary encoder for precise knob position tracking. Additionally, it includes an RTC circuit, an onboard buzzer, and buttons below the screen for device interaction and alert notifications. In terms of power supply, the design supports a wide voltage input range of 6-36V DC and has reserved interfaces for a lithium battery and charging circuit to cater to various needs. Moreover, reserved PORTA and PORTB interfaces facilitate the expansion of I2C and GPIO devices. This product is suitable for applications in parameter measurement and detection, smart home control, Internet of Things (IoT) projects, smart wearables, access control, industrial control, and educational maker projects.
Power On: The device can be powered on by pressing the "WAKE" button or through an IRQ signal triggered by the RTC timer. After the wake-up signal is triggered, it is necessary to set the hold(G46) pin to high (1) during program initialization to maintain power; otherwise, the device will re-enter sleep mode.
Power Off: When there is no USB external power supply, this can be achieved by pressing the RST button; or, when there is no USB external power supply, by setting HOLD(GPIO46)=0 in the program to power off the device.
To enter download mode, please hold down the G0 button on the StampS3 before powering on, then release it after the power is on.
Features
ST7789v2 screen
M5StampS3 as the main control
Rotary Encoder
Wide voltage input
Reserved PORTA and PORTB ports
Lithium battery interface (Rechargeable)
1/32DIN standard (45*22.5mm)
Programming platform: Arduino, UIFlow
Includes
1xM5DinMeter
1xADHESIVE PAPER
1X250mAh Battery
1xtag
1xDC-JACK terminal input (6-36V)
1xBack brace
Applications
Smart home detection and control system
Access Control System
Industrial Control
Makers and DIY projects
Specification
Resources | Parameters |
---|---|
MCU | ESP32-S3@Xtensa LX7,8M-FLASH,WIFI,OTG\CDC function |
Wide Voltage Input Range | 6-36V |
Screen Driver | ST7789V2 |
Charge Current | 100mA |
Grove Carries Capacity | PORT-A Carrying capacity :DC5V/Max:220mA PORT-B Carrying capacity :DC5V/Max:220mA |
standby current(Battery powered standby current) | DC4.2V/38.4uA |
Battery seat specifications | 1.25mm-2p |
Power Supply Mode | USB/DC Power supply/Battery |
Operating Temperature | 0-40°C |
Product Size | 53*32*30mm |
Package Size | 137*93*24mm |
Product Weight | 17.6g |
Package Weight | 46g |
Effective Date: March 27, 2025
At OpenELAB, we are committed to providing accurate product descriptions and delivering high-quality products. If you experience any issues with your purchase, please notify us within 60 days of the shipment date.
1. Warranty Disclaimer
Unless explicitly stated in a specific agreement or purchase order, OpenELAB makes no warranties—express or implied—regarding the fitness, suitability, or merchantability of any product for a particular purpose or special use.
2. Warranty Policy
Warranty Period
The standard warranty period for products sold by OpenELAB is 12 months from the date of delivery.
Under this warranty, OpenELAB will make a reasonable effort to repair or replace products free of charge if defects are due to issues with raw materials, design, or manufacturing.
If the defect qualifies under this policy but falls outside the covered scope, reasonable charges may apply for repair or replacement.
After the warranty period, support may still be available at a reasonable fee.
Warranty Exclusions
The warranty does not apply in the following cases:
- The product is beyond the 12-month warranty period.
- Damage due to misuse, improper maintenance or storage, or failure to follow the user guide or manual.
- Issues caused by Force Majeure events (e.g., natural disasters, war, legal changes, etc.).
- Unauthorized repair attempts by the customer.
- The product is not defective but has been opened and is non-returnable by policy.
3. Returns & Refunds
If you're not satisfied with your purchase, you may be eligible for a return or exchange:
- Return for Refund: Within 15 days of receipt (unopened).
- Return for Replacement: Within 30 days of receipt (damaged or defective).
- Exchange Window: Up to 30 days from receipt.
Please email us at info@openelab.io for a return authorization before sending anything back.
Return Conditions
- Items must be in original, clean, and mint condition with packaging intact.
- Returns of damaged, used, scratched, modified, or programmed items will not be accepted.
- Include the receipt, a brief note with your name, order number, and reason for return.
Shipping & Fees
- Customers are responsible for return shipping to our warehouses in Europe, the US, or China.
- Refunds may be subject to additional shipping fees unless the return is due to our error.
- A flat €8 shipping fee will be deducted for returned items that originally qualified for free shipping.
Payment Platform Fees
For refunds processed through third-party platforms such as PayPal or Braintree, a standard 3.5% service fee may be deducted to cover payment processing costs.