Espressif ESP8684 WROOM 02UC ESP32 C2 Module

Espressif ESP8684 WROOM 02UC ESP32 C2 Module

€2,55 EUR
€2,55 EUR
€2,55 EUR
Save €0,00
Type: H2
Subtotal: €2,55

Free Shipping from 50€ in EU / 80€ Worldwide

- Product Inventory Location: China

- EU Countries Delivery Time: 1.5 weeks.

- Other Countries Delivery Time: 2 ~ 2.5 weeks.

Espressif ESP8684 WROOM 02UC ESP32 C2 Module

Espressif ESP8684 WROOM 02UC ESP32 C2 Module

€2,55
Espressif ESP8684 WROOM 02UC ESP32 C2 Module

Espressif ESP8684 WROOM 02UC ESP32 C2 Module

€2,55
Type: H2
Description

ESP8684-WROOM-02UC is a generic Wi-Fi and Bluetooth LE modules. The rich set of peripherals and high performance make the modules an ideal choice for smart homes, industrial automation, health care, consumer electronics, etc.
ESP8684-WROOM-02UC comes with a connector for an external antenna. ESP8684-WROOM-02UC is available in two variants that integrate the ESP8684H2 and ESP8684H4 chip respectively . The ESP8684H2 chip and the ESP8684H4 chip fall into the same category, namely ESP8684 chip series.ESP8684 series of chips have a 32-bit RISC-V single-core processor.It integrates a rich set of peripherals including UART, I2C, LED PWM controller, general DMA controller, temperature sensor, and SAR ADC.

Features

CPU and On-Chip Memory

  • ESP8684H2 or ESP8684H4 embedded, 32-bit RISC-V single-core processor, up to 120 MHz
  • 576 KB ROM
  • 272 KB SRAM (16 KB for cache)
  • In-Package flash (see details in Table 1 and Table 2)
  • Access to flash accelerated by cache
  • Supports flash In-Circuit Programming (ICP)

Wi-Fi

  • 802.11 b/g/n
  • Center frequency range of operating channel: 2412 ~ 2484 MHz
  • Supports 20 MHz bandwidth in 2.4 GHz band
  • 1T1R mode with data rate up to 72.2 Mbps
  • Wi-Fi Multimedia (WMM)
  • TX/RX A-MPDU, TX/RX A-MSDU
  • Immediate Block ACK
  • Fragmentation and defragmentation
  • Transmit opportunity (TXOP)
  • Automatic Beacon monitoring (hardware TSF)
  • 3 × virtual Wi-Fi interfaces
  • Simultaneous support for Infrastructure BSS in Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous mode. Note that when ESP8684 series scans in Station mode, the SoftAP channel will change along with the Station channel

Bluetooth®

  • Bluetooth LE: Bluetooth 5.3 certified
  • High power mode (20 dBm)
  • Speed: 125 kbps, 500 kbps, 1 Mbps, 2 Mbps
  • Advertising extensions
  • Multiple advertisement sets
  • Channel selection algorithm #2
  • Internal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna

Peripherals

  • GPIO, SPI, UART, I2C, LED PWM controller,general DMA controller, temperature sensor, SAR ADC, timers and watchdog

Integrated Components on Module

  • 26 MHz crystal oscillator

Antenna Options

  • On-board PCB antenna (ESP8684-WROOM-02C)
  • External antenna via a connector (ESP8684-WROOM-02UC)

Operating Conditions

  • Operating voltage/Power supply: 3.0 ~ 3.6 V
  • Operating ambient temperature: –40 ~ 105 °C

Certification

  • Green certification: RoHS/REACH Test
  • HTOL/HTSL/uHAST/TCT/ESD/Latch-up
Read More
Shipping Policy

General Shipping Info

  • Shipping address should be input in English without any special symbols to help the courier company recognize your address in the system. We will ship according to the shipping address you provided. Please notify us of any address change before your order is marked "Processing" to avoid parcel loss.
  • Please contact our customer service staff immediately if you need to cancel or alter an order. Once your order has reached "processing" status, it can no longer be canceled or altered in any way. To avoid complications, please recheck your shopping cart before checkout.
  • We can ship all in-stock orders within 2 business days as your order has been confirmed.
  • All items are inspected before dispatch and are carefully hand-packed.
  • With standard courier practice, you need to check the contents of the parcel before signing for your goods. Otherwise, we will not be held responsible for any damage that may have occurred in transit.

Free Shipping Policy

Free Shipping Policy

Distributors are not eligible for free shipping.

Shipping Options

We offer competitively priced shipping services via Deutsche Post, DHL, YunExpress, and 4PX, with tracking to ensure your products are delivered safely and promptly.

Shipping Times (From China Warehouse)

  • Asia: 2-5 Business Days
  • Western EU: 7-10 Business Days
  • Eastern EU: 7-10 Business Days
  • North America: 5-8 Business Days
  • South America: 7-15 Business Days
  • Australia: 5-8 Business Days
  • Africa: 5-15 Business Days

Shipping Times (From German Warehouse)

  • Germany: 2-4 Business Days
  • Western EU: 3-5 Business Days
  • Eastern EU: 4-6 Business Days

Important Notice:

Faster shipping times to Western and Eastern Europe apply only to products marked as "Product Inventory Location: Germany" on the product page. If the product is not labeled with this location, it will ship from our Chinese warehouse following the corresponding shipping schedule above.

Whether shipped from Germany or China, we cover all import duties and taxes, ensuring that you receive your package without any additional costs or hassles with customs.

Please verify the inventory location on the product page before placing your order to confirm delivery timeframes. For any questions or further assistance, feel free to contact us!

International Warehouses

Our products are stored in both our Shenzhen and German warehouses to provide more flexible logistics solutions tailored to different regions and customer needs. On each product's description page, we indicate the specific warehouse location to help you better plan your purchase and delivery schedule.

International Warehouses

German Warehouse

For products stored in our warehouse in Germany, we use either Deutsche Post or DHL for shipping, depending on the size of the package. Logistics within Germany are very efficient, with an estimated delivery time of 2-4 business days, ensuring you receive your order quickly and conveniently.

Chinese Warehouse

Products shipped from our Chinese warehouse are handled by YunExpress. Given the complexities of international shipping, the estimated delivery time for these packages is around 10 business days, though this may vary slightly due to customs processes or other uncontrollable factors.

To ensure that your order is delivered within your desired timeframe, we recommend reviewing the warehouse information provided on the product pages before placing your order and selecting the appropriate shipping option. If you have any questions or need further assistance, please don't hesitate to contact our customer support team—we are here to help you!

Order Status

  • Pending: Your order has been submitted, but payment has not been completed.
  • Confirming (Bank transfer only): We are waiting for payment to arrive or are verifying payment.
  • Confirmed: Payment has been confirmed and your order will begin processing shortly.
  • Processing: Your order is being processed.
  • Shipped: Your package has been collected by the forwarder.
  • Traceable: Tracking information for your package is now available. Please go to your order history to track the status of your package.
  • Canceled: Your order has been canceled.
  • Closed (Credit card only): Payment was rejected by the bank. Please place the order again and try another payment method or contact your credit card provider.

Please note that it may take 1-2 working days for Deutsche Post, DHL, YunExpress, and 4PX services to update the status from 'Shipped' to 'Traceable'.

Read More
Return Policy

Effective Date: March 25, 2024

OpenELAB guarantees to provide accurate descriptions and high-quality products. If you encounter any problems with any executed purchase order, please notify OpenELAB within 60 days from the date of shipment.

UNLESS OTHERWISE EXPRESSLY STIPULATED IN PERTICULAR AGREEMENT OR PURCHASE ORDER, OpenELAB MAKES NO WARRANTY OF FITNESS, SUITABILITY OR MERCHANTABILITY OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR SPECIAL CIRCUMSTANCE.

Warranty Period

General Term
  • Warranty Period of product sold by OpenELAB is 12 months as of the date of delivery.
  • OpenELAB will provide economic effort to replace or repair the product free of charge if the defects are caused due to reasons related to raw materials, designation, or manufacturing process.
  • OpenELAB will repair, replace the product under reasonable charges to the customer if the product defects meets this Warranty Policy.
  • OpenELAB will repairs, replace the defective product, or provide on-site technical support for products exceeding the warranty period on reasonable fees.

Exceptions
OpenELAB will refuse to provide warranty promises if:
  1. Products have been beyond the warranty period; or
  2. Defections are due to wrong use, improper maintenance or storage, or breach of user guides or menus provided by OpenELAB; or
  3. Defections are results of Force Majeure, which shall mean any acts of law, natural disaster, war, riots, strikes, insurrections, tsunami, typhoon, earthquake, terrorism, governmental sanctions, legislation changes or any similar event beyond such party’s reasonable control; or
  4. Customers have conducted repair actions on the products.
  5. For those specific product (e.g. Azure Sphere MT3620 Development Kit ) as notified to Customer expressly, in cases that the product is free from any Quality Defect and the product package has been opened by Customer.

Returns & Refund

If you are not satisfied with a product you bought, for whatever reason, it is possible to return it for refund within 5 days of receipt (10 days for an exchange). Please first email us to order@OpenELAB.io for return authorization.

We would like to kindly remind you that the customer is responsible for shipping the product back to our warehouse in Europe, US or China, which ever is convenient to you.

Return for Refund: within 5 days of receiving your product. (unopened)
Return for Replacement: within 10 days of receiving your product. (damaged or defective)

No returns will be accepted without having previously obtained a return authorization. All returns must be in its original mint and clean condition. Returns on damaged, scratched, programmed, burnt, or otherwise 'played with' product will not be accepted. The product must then be returned in its original packaging with its receipt and a small note including the user name, order number and the reason of the return. The note will help us to serve you better and improve our products. Reimbursement will be denied for any products which do not conform to the above mentioned conditions.

Customer shall cover the cost of returning the product and need to pay for shipping (if you want a refund instead of a replacement). Shipping fees will only be refunded if the return is a result of a shipping error on OpenELAB’s part.
Since the third-party payment platforms, such as PayPal and Braintree (Credit Card), will charge standard service fees amounting to 3.5% on all processed transactions. For refund orders via PayPal and Braintree, a corresponding deduction of the service fee will be made to cover the associated payment processing.
Read More

Related Products

Example product title
From €2,55 EUR
€2,55 EUR
From €2,55 EUR
Save €0,00
Example product title
From €2,55 EUR
€2,55 EUR
From €2,55 EUR
Save €0,00
Example product title
From €2,55 EUR
€2,55 EUR
From €2,55 EUR
Save €0,00
Example product title
From €2,55 EUR
€2,55 EUR
From €2,55 EUR
Save €0,00
Example product title
From €2,55 EUR
€2,55 EUR
From €2,55 EUR
Save €0,00
Example product title
From €2,55 EUR
€2,55 EUR
From €2,55 EUR
Save €0,00
Example product title
From €2,55 EUR
€2,55 EUR
From €2,55 EUR
Save €0,00
Example product title
From €2,55 EUR
€2,55 EUR
From €2,55 EUR
Save €0,00
Example product title
From €2,55 EUR
€2,55 EUR
From €2,55 EUR
Save €0,00
Example product title
From €2,55 EUR
€2,55 EUR
From €2,55 EUR
Save €0,00

Recently Viewed Products