
Espressif ESP8684 Mini 1/1U ESP32 C2 Module
📦 Location of the warehouse: China
Free shipping for you
Free Shipping from 30€ in Germany, 50€ in the EU!
Trustpilot rating: 4.4/5.0
Thank you for your support - rate us on Trustpilot!

Espressif ESP8684 Mini 1/1U ESP32 C2 Module
The ESP8684-MINI-1 and ESP8684-MINI-1U are general-purpose Wi-Fi and Bluetooth Low Energy (Bluetooth LE) modules, featuring a compact size and a variety of peripheral interfaces. They are suitable for applications in smart home, industrial automation, healthcare, consumer electronics, and more. The ESP8684-MINI-1 uses a PCB onboard antenna, while the ESP8684-MINI-1U is designed with a connector for an external antenna. Both modules come in two variants, equipped with either the ESP8684H2 or ESP8684H4 chip.
The ESP8684H2 and ESP8684H4 chips belong to the ESP8684 series, featuring a RISC-V 32-bit single-core processor. The ESP8684 series chips integrate a variety of peripherals, including UART, I2C, LED PWM controller, general DMA controller, temperature sensor, SAR analog-to-digital converter, and support for single-wire, dual-wire, and quad-wire SPI interfaces.
Features
CPU and On-Chip Memory
- Integrated ESP8684H2 or ESP8684H4 chip, RISC-V 32-bit single-core microprocessor with a maximum clock speed of 120 MHz
- 576 KB ROM
- 272 KB SRAM (16 KB reserved for cache)
- SiP flash (varies by model, see Table 1 for ordering information)
- Flash controller with a cache mechanism
- Supports in-circuit programming (ICP) for flash
Wi-Fi
- Supports IEEE 802.11 b/g/n protocol
- Operating channel center frequency range: 2412 ~ 2484 MHz
- 20 MHz bandwidth support in the 2.4 GHz band
- 1T1R mode with data rates up to 72.2 Mbps
- Wireless Multimedia (WMM)
- Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU)
- Immediate Block ACK
- Fragmentation and defragmentation
- Transmit opportunity (TXOP)
- Beacon auto-detection (hardware TSF)
- 3 virtual Wi-Fi interfaces
- Supports infrastructure network (Infrastructure BSS) with Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous mode
Note: In Station mode, when scanning, the SoftAP channel will change simultaneously.
Bluetooth®
- Bluetooth Low Energy (Bluetooth LE): Bluetooth 5
- High power mode (20 dBm)
- Supports data rates of 125 kbps, 500 kbps, 1 Mbps, and 2 Mbps
- Advertising Extensions
- Multiple Advertisement Sets
- Channel Selection Algorithm #2
- Wi-Fi and Bluetooth coexist using a shared antenna
Peripherals
- GPIO, SPI, UART, I2C, LED PWM controller, general DMA controller, temperature sensor, SAR analog-to-digital converter
Module Integrated Components
- 26 MHz integrated crystal oscillator
Antenna Options
- Onboard PCB antenna (ESP8684-MINI-1)
- Connector for external antenna (ESP8684-MINI-1U)
Operating Conditions
- Operating voltage/power supply voltage: 3.0 ~ 3.6 V
- Operating temperature: -40 ~ 105 °C
Comparison of ESP8684-MINI-1/1U Model Specifications
Model | SiP Flash | Operating Temperature (°C) | Module Dimensions (mm) | Antenna |
---|---|---|---|---|
ESP8684-MINI-1-H2 | 2 MB | -40 ~ 105 | 13.2 × 16.6 × 2.4 | PCB onboard antenna |
ESP8684-MINI-1-H4 | 4 MB | -40 ~ 105 | 13.2 × 16.6 × 2.4 | PCB onboard antenna |
ESP8684-MINI-1U-H2 | 2 MB | -40 ~ 105 | 13.2 × 12.5 × 2.4 | IPEX external antenna connector |
ESP8684-MINI-1U-H4 | 4 MB | -40 ~ 105 | 13.2 × 12.5 × 2.4 | IPEX external antenna connector |
Effective Date: March 27, 2025
At OpenELAB, we are committed to providing accurate product descriptions and delivering high-quality products. If you experience any issues with your purchase, please notify us within 60 days of the shipment date.
1. Warranty Disclaimer
Unless explicitly stated in a specific agreement or purchase order, OpenELAB makes no warranties—express or implied—regarding the fitness, suitability, or merchantability of any product for a particular purpose or special use.
2. Warranty Policy
Warranty Period
The standard warranty period for products sold by OpenELAB is 12 months from the date of delivery.
Under this warranty, OpenELAB will make a reasonable effort to repair or replace products free of charge if defects are due to issues with raw materials, design, or manufacturing.
If the defect qualifies under this policy but falls outside the covered scope, reasonable charges may apply for repair or replacement.
After the warranty period, support may still be available at a reasonable fee.
Warranty Exclusions
The warranty does not apply in the following cases:
- The product is beyond the 12-month warranty period.
- Damage due to misuse, improper maintenance or storage, or failure to follow the user guide or manual.
- Issues caused by Force Majeure events (e.g., natural disasters, war, legal changes, etc.).
- Unauthorized repair attempts by the customer.
- The product is not defective but has been opened and is non-returnable by policy.
3. Returns & Refunds
If you're not satisfied with your purchase, you may be eligible for a return or exchange:
- Return for Refund: Within 15 days of receipt (unopened).
- Return for Replacement: Within 30 days of receipt (damaged or defective).
- Exchange Window: Up to 30 days from receipt.
Please email us at info@openelab.io for a return authorization before sending anything back.
Return Conditions
- Items must be in original, clean, and mint condition with packaging intact.
- Returns of damaged, used, scratched, modified, or programmed items will not be accepted.
- Include the receipt, a brief note with your name, order number, and reason for return.
Shipping & Fees
- Customers are responsible for return shipping to our warehouses in Europe, the US, or China.
- Refunds may be subject to additional shipping fees unless the return is due to our error.
- A flat €8 shipping fee will be deducted for returned items that originally qualified for free shipping.
Payment Platform Fees
For refunds processed through third-party platforms such as PayPal or Braintree, a standard 3.5% service fee may be deducted to cover payment processing costs.