Waveshare 13.3 inch E-Ink Display 960x680 E-Paper with Hat

No need for backlight, power failure can keep the last screen display content for a long time.
Very low power consumption, basically only consumes power when refreshing.
Based on Raspberry Pi 40PIN GPIO interface design, suitable for Raspberry Pi series motherboards, Jetson Nano, RDK X3.
Reserved SPI control interface, can be connected to Raspberry Pi/Jetson Nano/RDK X3/ Arduino/STM32, etc.
Arduino/STM32 and other motherboards.
On-board level shifter chip, compatible with 3.3V and 5V microcontroller interfaces.
Provide complete supporting manuals (driver board schematic, Raspberry Pi/Jetson Nano/ RDK X3/Arduino/STM32).
RDK X3/Arduino/STM32 etc. sample programmes).

Feature

• Operating Voltage 3.3V/5V    
• Grey level 4
• Communication interface 3-wire SPI, 4-wire SPI    
• Local refresh 0.7s
• Dimension 286.32 × 212.26mm    
• Global refresh 5s
• Display size 275.52 × 195.16mm    
• Refresh power consumption 66mW
• Dot pitch 0.287 × 0.287mm    
• Sleep current <0.01uA (near 0)
• Resolution 960 × 680 pixels    
• Viewing angle >170
• Display colour Black, white