Waveshare 13.3 inch 3 Color E-Ink Display 960x680 E-Paper

No need for backlight, power failure can keep the last screen display content for a long time.
Very low power consumption, basically only when refreshing.
Comprehensive documentation (driver board schematic, Raspberry Pi/Jetson Nano/RDK X3/Arduino/STM32 etc. sample programmes).
The following applies to the modular version only：
Based on Raspberry Pi 40PIN GPIO interface design, applicable to Raspberry Pi series motherboards, Jetson Nano, RDK X3.
Reserved SPI control interface, can be connected to Raspberry Pi/Jetson Nano/RDK X3/Arduino/STM32 and other main control boards.
On-board level shifter chip, compatible with 3.3V and 5V microcontroller interface

Feature

• Operating voltage Bare screen version: 3.3V
• Grey level 2
• Module version: 3.3V/5V
• Communication interface 3-wire SPI, 4-wire SPI 
• Local refresh 2.9s
• Screen size 286.32 × 212.26 × 1.20mm 
• Global refresh 22s
• Display size 275.52 × 195.16mm 
• Refresh power consumption 75mW
• Dot Pitch 0.287 × 0.287mm 
• Sleep Current <0.01uA (near 0)
• Resolution 960 × 680pixels 
• Viewing Angle >170°
• Display colours Red, black, white