openelab.de
openelab.com
HC-SR501 PIR Motion Sensor | Adjustable Delay Range Module
HC-SR501 PIR Motion Sensor | Adjustable Delay Range Module
HC-SR501 PIR Motion Sensor - Adjustable Infrared Motion Detection Module for Arduino and IoT Projects
The HC-SR501 PIR motion sensor module detects human and animal movement by sensing changes in infrared radiation. It is a practical trigger module for security alarms, automatic lighting, occupancy detection, camera wake-up circuits, and low-cost smart-home prototypes.
The module is widely used with Arduino-compatible boards such as the ELAB Nano V3, quick wiring setups based on the MB 102 Breadboard Kit, and status indicators such as the RGB Full Color LED Module. Onboard sensitivity and delay adjustments make it easier to tune behavior after mounting.
Use the digital output for event detection rather than distance measurement. For best reliability, keep the PIR lens clear, avoid pointing it at heaters or direct sunlight, and allow a short warm-up period after power-up.
Technical Specifications
| Parameter | Value |
|---|---|
| SKU | TB-HC-SR501 |
| Sensor Type | PIR passive infrared motion detector |
| Output | Digital HIGH/LOW motion signal |
| Typical Operating Voltage | 5V module supply, commonly used from 5V microcontroller systems |
| Detection Method | Infrared change detection through Fresnel lens |
| Adjustments | Sensitivity and delay potentiometers |
| Trigger Modes | Common HC-SR501 modules support retrigger / non-retrigger jumper modes |
| Typical Applications | Lighting control, alarms, occupancy sensing, robots |
| Host Interface | GPIO input |
| Warm-Up | Allow stabilization after power-up |
Board Layout & Label Guide
- VCC - Power input for the PIR module.
- OUT - Digital signal output to a controller GPIO.
- GND - Common ground with the host controller.
- Fresnel Lens - Covers the PIR element and defines the detection field.
- Sensitivity Potentiometer - Adjusts detection range behavior.
- Delay Potentiometer - Adjusts how long output stays active after detection.
- Trigger Jumper - Selects retrigger behavior on common HC-SR501 boards.
- Mounting Note - Keep the lens aimed at the target zone and away from heat drafts.
Application Scenarios
1. Arduino Motion Alarm
Turn on an LED when motion is detected.
const int pirPin = 2;
const int ledPin = 13;
void setup() {
pinMode(pirPin, INPUT);
pinMode(ledPin, OUTPUT);
}
void loop() {
digitalWrite(ledPin, digitalRead(pirPin));
}2. ESP32 Occupancy Event
Print motion events to the serial monitor.
const int pirPin = 27;
void setup() {
Serial.begin(115200);
pinMode(pirPin, INPUT);
}
void loop() {
if (digitalRead(pirPin) == HIGH) {
Serial.println("motion");
delay(1000);
}
}3. MicroPython Motion Trigger
Read PIR output from a Pico-style board.
from machine import Pin
import time
pir = Pin(15, Pin.IN)
while True:
if pir.value():
print("motion detected")
time.sleep(1)
time.sleep(0.05)Packing List
- 1 x HC-SR501 PIR Motion Sensor Module
FAQ
Q: What does this module detect?
A: It detects motion from warm bodies by sensing changes in infrared radiation.
Q: Does it measure distance?
A: No. It provides a motion/no-motion digital output.
Q: Why does it trigger at power-up?
A: PIR modules need a short stabilization period after power is applied.
Q: Can I adjust sensitivity?
A: Yes, common HC-SR501 modules include a sensitivity potentiometer.
Q: Can I adjust output time?
A: Yes, the delay potentiometer adjusts active output duration.
Q: Can it work behind glass?
A: PIR detection is usually poor behind glass or acrylic barriers.
Q: What causes false triggers?
A: Sunlight, heaters, airflow, vibration, and unstable power can cause false events.
Q: Can I use it with Arduino?
A: Yes, connect OUT to a digital input and share ground.
1. General Shipping Information
- We provide reliable shipping services with a tracking number for each order.
- Shipping addresses must be entered in English and should not contain special symbols, so that the courier system can recognize your location correctly.
- Please make sure your shipping address is accurate before placing your order. We ship strictly according to the address provided at checkout.
- In-stock orders are usually dispatched within 1 business day after order confirmation.
- Estimated delivery times refer to the period after dispatch and do not include order processing time, weekends, public holidays, customs inspection, or force majeure delays.
- If you need to cancel or modify your order, please contact us before the order is marked as “Shipped”. Once shipped, the order cannot be canceled or changed.
🚀 Need Faster Shipping?
If you require expedited shipping, please contact our customer support team at info@openelab.io for a customized quote based on your destination.
2. Shipping Rates & Options
Shipping rates are calculated based on order value, destination, and available shipping methods. The final available options will be displayed at checkout.
2.1 Germany Domestic Shipping
| Shipping Method | Order Value | Cost | Est. Delivery |
|---|---|---|---|
| Deutsche Post | €0.00 - €50.00 | €4.95 | 2-4 Business Days |
| Deutsche Post | Over €50.00 | Free | 2-4 Business Days |
|
DHL Paket (Faster Delivery) |
€0.00 - €50.00 | €6.95 | 1-3 Business Days |
|
DHL Paket (Faster Delivery) |
€50.00 - €100.00 | €2.00 | 1-3 Business Days |
|
DHL Paket (Faster Delivery) |
Over €100.00 | Free | 1-3 Business Days |
2.2 Selected EU Countries / Regions
Available EU shipping destinations are shown at checkout based on your shipping address. For orders shipped to selected EU countries or regions outside Germany, we use FedEx Regional Economy.
| Shipping Method | Order Value | Cost | Est. Delivery |
|---|---|---|---|
| FedEx Regional Economy | €0.00 - €100.00 | €7.95 | 3-5 Business Days |
| FedEx Regional Economy | Over €100.00 | Free | 3-5 Business Days |
EU orders may be fulfilled from our Munich warehouse or, when applicable, from our Shenzhen warehouse depending on inventory availability. For EU member states, OpenELAB covers applicable import duties and taxes under DDP service where required.
2.3 United States
| Region | Shipping Method | Order Value | Cost | Est. Delivery |
|---|---|---|---|---|
|
Continental U.S. (50 States) |
USPS Ground Advantage | €0.00 - €45.00 | €4.95 | 3-7 Business Days |
| USPS Ground Advantage | Over €45.00 | Free | 3-7 Business Days | |
| USPS Priority Mail | €0.00 - €45.00 | €16.95 | 1-4 Business Days | |
| USPS Priority Mail | Over €45.00 | €14.95 | 1-4 Business Days | |
|
Non-Continental U.S. (AK, HI, PR, etc.) |
USPS Ground Advantage | €0.00 - €60.00 | €6.95 | 5-9 Business Days |
| USPS Ground Advantage | Over €60.00 | Free | 5-9 Business Days |
Non-Continental U.S. regions include Alaska, American Samoa, Guam, Hawaii, the Marshall Islands, the Northern Mariana Islands, Palau, Puerto Rico, the U.S. Virgin Islands, and U.S. Armed Forces addresses.
2.4 International Destinations Outside the EU
For selected international destinations outside the EU, including Switzerland, the United Kingdom, and Norway, shipping rates are as follows:
| Order Amount | Shipping Cost |
|---|---|
| €0.00 - €300.00 | €19.95 |
| Over €300.00 | Free |
For non-EU destinations, import duties, taxes, and customs fees may be charged by the destination country and are the responsibility of the recipient.
3. Warehouses & Fulfillment
Our products may be stored in our Munich, Arlington, and Shenzhen warehouses. The actual shipping warehouse depends on product availability and destination.
3.1 Munich Warehouse
For products stored in our Munich warehouse, we use Deutsche Post or DHL Paket for domestic deliveries within Germany. For selected EU destinations outside Germany, we use FedEx Regional Economy.
3.2 Arlington Warehouse
For products stored in our Arlington warehouse, we use USPS or UPS for deliveries within the United States.
3.3 Shenzhen Warehouse
For pre-order items or products fulfilled directly from our Shenzhen warehouse, we arrange reliable international shipping based on destination and inventory status. For EU member states, OpenELAB covers applicable import duties and taxes under DDP service where required.
4. Inventory, Pre-orders & Split Shipments
- Inventory Status: Please check the product page for real-time stock information. If an item is out of stock in our local warehouses, it may be marked as “Pre-order”.
- Pre-order Fulfillment: Pre-order items may be shipped directly from Shenzhen or restocked to a local warehouse first before final delivery.
- Split Shipments: If your order contains both in-stock and pre-order items, we may ship them separately. No additional shipping fee will be charged for split shipments caused by our fulfillment arrangement.
5. Customs, Taxes & Delivery Issues
5.1 Customs and Taxes
For EU Member States:
Whether shipped from Germany or China, OpenELAB covers applicable import duties and taxes under DDP service where required. Customers in EU member states should not be charged additional import duties or VAT upon delivery.
For destinations outside the European Union, such as Switzerland, Norway, and the United Kingdom, import duties, taxes, and customs fees may be charged by local authorities upon delivery. These fees are the responsibility of the recipient.
5.2 Damaged, Delayed, or Lost Parcels
Please inspect your parcel upon delivery where possible. If you notice visible damage, please report it to the courier and contact us as soon as possible. This does not affect your statutory consumer rights.
If your parcel is delayed, lost, returned to sender, or the tracking information has not updated for an unusual period of time, please contact us at info@openelab.io. We will assist you in checking the shipment status with the courier.
5.3 Incorrect Address or Failed Delivery
If a parcel cannot be delivered due to an incorrect or incomplete address provided by the customer, refusal of delivery, or failure to collect the parcel, additional shipping or return costs may apply.
6. VAT
For orders within the EU, VAT is collected at checkout according to the applicable destination rules. No additional VAT should be collected upon delivery for EU member state orders covered under our DDP shipping arrangement.
