Waveshare 13.3 inch 3 Color E-Ink Display 960x680 E-Paper
📦 Location of the warehouse: China
Free shipping for you
Free Shipping from 30€ in Germany, 50€ in the EU!
Trustpilot rating: 4.4/5.0
Thank you for your support - rate us on Trustpilot!
Waveshare 13.3 inch 3 Color E-Ink Display 960x680 E-Paper
No need for backlight, power failure can keep the last screen display content for a long time.
Very low power consumption, basically only when refreshing.
Comprehensive documentation (driver board schematic, Raspberry Pi/Jetson Nano/RDK X3/Arduino/STM32 etc. sample programmes).
The following applies to the modular version only：
Based on Raspberry Pi 40PIN GPIO interface design, applicable to Raspberry Pi series motherboards, Jetson Nano, RDK X3.
Reserved SPI control interface, can be connected to Raspberry Pi/Jetson Nano/RDK X3/Arduino/STM32 and other main control boards.
On-board level shifter chip, compatible with 3.3V and 5V microcontroller interface
Feature
- Operating voltage Bare screen version: 3.3V
- Grey level 2
- Module version: 3.3V/5V
- Communication interface 3-wire SPI, 4-wire SPI
- Local refresh 2.9s
- Screen size 286.32 × 212.26 × 1.20mm
- Global refresh 22s
- Display size 275.52 × 195.16mm
- Refresh power consumption 75mW
- Dot Pitch 0.287 × 0.287mm
- Sleep Current <0.01uA (near 0)
- Resolution 960 × 680pixels
- Viewing Angle >170°
- Display colours Red, black, white
Effective Date: March 27, 2025
At OpenELAB, we are committed to providing accurate product descriptions and delivering high-quality products. If you experience any issues with your purchase, please notify us within 60 days of the shipment date.
1. Warranty Disclaimer
Unless explicitly stated in a specific agreement or purchase order, OpenELAB makes no warranties—express or implied—regarding the fitness, suitability, or merchantability of any product for a particular purpose or special use.
2. Warranty Policy
Warranty Period
The standard warranty period for products sold by OpenELAB is 12 months from the date of delivery.
Under this warranty, OpenELAB will make a reasonable effort to repair or replace products free of charge if defects are due to issues with raw materials, design, or manufacturing.
If the defect qualifies under this policy but falls outside the covered scope, reasonable charges may apply for repair or replacement.
After the warranty period, support may still be available at a reasonable fee.
Warranty Exclusions
The warranty does not apply in the following cases:
- The product is beyond the 12-month warranty period.
- Damage due to misuse, improper maintenance or storage, or failure to follow the user guide or manual.
- Issues caused by Force Majeure events (e.g., natural disasters, war, legal changes, etc.).
- Unauthorized repair attempts by the customer.
- The product is not defective but has been opened and is non-returnable by policy.
3. Returns & Refunds
If you're not satisfied with your purchase, you may be eligible for a return or exchange:
- Return for Refund: Within 15 days of receipt (unopened).
- Return for Replacement: Within 30 days of receipt (damaged or defective).
- Exchange Window: Up to 30 days from receipt.
Please email us at info@openelab.io for a return authorization before sending anything back.
Return Conditions
- Items must be in original, clean, and mint condition with packaging intact.
- Returns of damaged, used, scratched, modified, or programmed items will not be accepted.
- Include the receipt, a brief note with your name, order number, and reason for return.
Shipping & Fees
- Customers are responsible for return shipping to our warehouses in Europe, the US, or China.
- Refunds may be subject to additional shipping fees unless the return is due to our error.
- A flat €8 shipping fee will be deducted for returned items that originally qualified for free shipping.
Payment Platform Fees
For refunds processed through third-party platforms such as PayPal or Braintree, a standard 3.5% service fee may be deducted to cover payment processing costs.
