Note [For orange button]:
Since the edge of the button is orange, the color of the light shown in RGB is recommended to use white light, if the corresponding RGB color cannot be displayed, please purchase carefully.
T-Embed is an IoT-embedded panel designed for programmable development. ABS+PC material (optional translucent version) panel + circuit board integrated standardized design, providing product 3D drawings and reference design drawings. Easy design to embed on your product.
Specifications
| MCU | ESP32-S3 |
| Material | ABS |
| Wireless | Wi-Fi IEEE 802.11 b/g/n; Bluetooth 5, Bluetooth mesh |
| 1.9-inch IPS color TFT LCD |
| Model | ST7789 |
| Brightness | 350(TYP)Cd/m2 |
| Resolution | 170(H)RGBx 320(V) |
| Rotary encoder + confirmation key in one |
| Microphone | X 2 |
| NUMBERS OF DETENT | 24 |
| PULSE/ROTATION | 12 PULSE/360° |
| Speaker | 8 ohm @ 1W |
| Ring RGB light | x 7 |
| GROVER | x 1 |
| 2.54 x 8pin GPIO interface |
| TF card holder |
| Type-C USB |
| Battery charge and discharge protection circuit@1.25mm battery interface |
[Github]
If you need technical support please check the link to find more details.
T-Embed
T-Embed Shell
Product Display
Board Size
Pin Diagram
Shipping List
Only T-Embed
Note: Batteries are not included in the list
T-Embed With Shell
1 X T-embed
1 X IDC3 Box Header Connector 2.54 ( 2*4P)
1 X 2.0mm Male PIN (1*5P)
1 X JST1.25mm2P
1 X Box Header Cable 2.54 8pin 10cm
1 X 2.0mm Male PIN (1*6P)
Note: Batteries are not included in the list