📡 LD6001 – 60GHz Millimeter-Wave Radar Module
The LD6001 module is a 4T3R (four-channel transmitter, three-channel receiver) fully integrated 60GHz millimeter-wave radar module. It can be used to detect the location and quantity of human body areas (up to eight people), walking trajectories, and more 👤🚶.
📊 Product Parameters
| Parameters | Value | Unit | Remark |
|---|---|---|---|
| 📶 Working frequency range | 60 | GHz | |
| ⚡ Sending voltage | 12 | dBm | |
| 🔄 Modulation Type | FMCW | / | Frequency Modulated Continuous Wave |
| 📡 Sweep frequency broadband | 4 | GHz | |
| 🧭 Horizontal width of antenna beam | ±60 | ° | |
| 📐 Antenna beam elevation width | ±30 | ° | |
| 📏 Detection distance (max) | 8 | m | |
| 🔋 Working voltage | 5 | V | |
| ⚡ Average power consumption | 1.1 | W | |
| 🌡️ Working temperature | -15 ~ 70 | °C | |
| 📐 Dimension | 60 × 30 | mm | |
| ⏱️ Start time | 3 | s |
📄 Product Details
Hi-Link 60GHz Radar Sensor Module LD6001
🛠️ Installation Requirements
The module should be installed on a vertical wall at a height of 2.2 meters. The front of the module (antenna facing upwards) should be tilted at an angle of 10°. While this method is generally recommended for the best effect, the module can also be installed slightly higher or the angle can be adjusted slightly as needed. The actual test effect shall prevail ✅.
The schematic diagram illustrating the target installation effect, along with the distance, horizontal angle, and pitch angle, is presented below for reference: