Waveshare 5.79 inch 4 Color Raw E-Ink Display 792x272 E-Paper

€18,89
€18,89
€18,89
Sold out
Quantity must be 1 or more

5.79inch E-Paper Display (G), E-Ink Display, 792x272, Red/Yellow/Black/White, SPI Interface
5.79″ E-Paper (G)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

Note: the driver board is optional, please refer to the Package Content for detailed part list


  • Size 5.79″
  • Resolution 792×272
  • Viewing Angle >170°
  • Display Color Red/Yellow/Black/White
  • Grey Scale 2

  • Communication SPI
  • Display Panel E-paper
  • Experience Paper-like
  • Environment Ambient Light Required
  • Display Type Passively Reflective

Version Options

5.79inch e-Paper (G)
raw display, without driver board

5.79inch e-Paper Module (G)
with driver board


Features At A Glance
  • No backlight, keeps displaying the latest content for a long time even when powered down
  • Ultra-low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)
  • Optional for e-Paper driver board:
    • Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.
    • Onboard voltage translator, compatible with 3.3V / 5V MCUs

Specifications

OPERATING VOLTAGE

Raw display: 3.3V

DISPLAY COLOR

Red/Yellow/Black/White

with driver board: 3.3V/5V

INTERFACE

3-wire SPI, 4-wire SPI

GREYSCALE

2

OUTLINE DIMENSIONS

Raw display: 150.92 × 56.94 × 1.00mm

FULL REFRESH TIME

21s

with driver board: 152.50 × 58.50mm

DISPLAY SIZE

139.00 × 47.74mm

REFRESH POWER

<30mW

DOT PITCH

0.1755 × 0.1755mm

STANDBY CURRENT

<0.01uA (almost none)

RESOLUTION

792 × 272 pixels

VIEWING ANGLE

>170°






Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: that charged particles suspended in clear fluid will move to the sides of the microcapsule when an electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as an e-reader due to its paper-like effect.


Optional For E-Paper Driver Board

Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi/Jetson Series/Arduino/STM32

PWR

Power on/off control

BUSY

Busy status output pin

RST

External reset, low active

DC

Data/Command selection (high for data, low for command)

CS

SPI chip selection, low active

CLK

SPI SCK pin

DIN

SPI MOSI pin

GND

Ground

VCC

Power (3.3V / 5V input)






Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs


Usage Example

Connecting With Raspberry Pi 5

* for reference only, the Raspberry Pi 5 is NOT included.

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...


Outline Dimensions

Weight: 0.057 kg

5.79inch e-Paper (G)

5.79inch e-Paper (G) x1


5.79inch e-Paper Module (G)

  1. 5.79inch e-Paper Module (G) x1
  2. GH1.25 9PIN cable 20cm x1
1
2


Go to full site