M5Stack M5Stamp C3U Mate with Pin Headers

Note: All products are tax-inclusive.

The new M5Stamp C3U features ESPRESSIF ESP32-C3 RISC-V MCU, with Wi-Fi 5 (LE) connectivity, applicable for home appliances and Industrial Automation. By combining RSA-3072-based secure boot and the AES-128-XTS-based flash encryption. The compact size and powerful functions, make it applicable for multiple IoT scenarios.

The M5Stamp C3U is based on a 32-bit RISC-V microcontroller, and operates at a maximum clock frequency of 160 MHz. With 400 KB of internal RAM and 4 MB Flash, it can facilitate many different use cases, involving connected devices. The M5Stamp C3U provides, Furthermore, the exceptional heat resistance plastic enclosure is sustained at a higher operating temperature.

Product Features

• MULTIPLE STYLE:
  • Three types of soldering options are available (SMT, DIP, flywire);
  • High-temperature resistant plastic enclosure, Peak temperature = 230℃;
• HIGH INTEGRATION:
  • M5Stamp C3 contains 5V->3.3V DC/DC design, GPIOx14;
  • USB Type C port;
  • Programmable RGB LED x1, Reset button x1, button x1;
  • 3D antenna, providing stable and reliable wireless communication.
• DEVELOPMENT PLATFORM:
  • Arduino, ESP32-IDF (UIFlow support coming soon)

Include

• M5Stamp C3U (5pcs):
  • 5 x M5Stamp C3U
  • 5 x Heat Resistant Sticker

Application

• DIY, Prototyping
• Industrial Automation
• Smart Home
• Wearable Devices
• Medical Devices
• Consumer Electronics

Note: The newly updated C3U shares the same features as the C3, but the difference is that the M5Stamp C3U without the USB download chip and the program download method is different（(The C3U uses the ESP32-C3's built-in USB Serial for program download)）. If you are looking for a more affordable project, you can add this to your shopping list!

Program Download/Notes

Enter the program download mode operation:
1. Long press the center button (G9) of STAMP C3U under power failure conditions.
2. Connect to the computer, after the port is successfully identified, program burning.
USB CDC enabled:
By default, USB CDC is not enabled, the serial port output started by C3U will be output through UART0, if you need to output through USB, please use IDE to make it USB CDC before downloading the program option enabled. (Arduino users can enable it through ->-, IDF users please refer to ESP IDF official documentation.)

product comparison

Specifications