Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for price tags, shelf labels, industrial instruments...
- Size5.79″
- Resolution792×272
- Viewing Angle>170°
- Display ColorBlack/White
- Grey Scale4
- CommunicationSPI
- Display PanelE-paper
- ExperiencePaper-like
- EnvironmentAmbient Light Required
- Display TypePassively Reflective
- RefreshingPartial Refresh Support
- No backlight, keeps displaying the latest content for a long time even when powered down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)
OPERATING VOLTAGE | 3.3V/5V | DISPLAY COLOR | Black/White |
INTERFACE | 3-wire SPI, 4-wire SPI | GREYSCALE | 4 |
OUTLINE DIMENSIONS | 152.50 × 58.50mm | FULL REFRESH TIME | 3.5s |
DISPLAY SIZE | 139.00 × 47.74mm | PARTIAL REFRESH TIME | 0.8s |
DOT PITCH | 0.1755 × 0.1755mm | REFRESH POWER | <50mW |
VIEWING ANGLE | >170° | STANDBY CURRENT | <0.01uA (almost none) |
RESOLUTION | 792 × 272 pixels | ||
Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: that charged particles suspended in clear fluid will move to the sides of the microcapsule when an electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as an e-reader due to its paper-like effect.
For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
PWR | Power on/off control |
BUSY | Busy status output pin |
RST | External reset, low active |
DC | Data/Command selection (high for data, low for command) |
CS | SPI chip selection, low active |
CLK | SPI SCK pin |
DIN | SPI MOSI pin |
GND | Ground |
VCC | Power (3.3V / 5V input) |
Onboard Voltage Translator
Compatible With 3.3V / 5V MCUs
Connecting With Raspberry Pi 5
* for reference only, the Raspberry Pi 5 is NOT included.
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
Weight: 0.035 kg
- 5.79inch e-Paper Module x1
- GH1.25 9PIN cable 20cm x1