Details
Universal e-Paper Driver HAT, supports most Waveshare SPI e-Paper raw panels (not all)
Features at a glance
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
| operating voltage | 3.3V/5V |
|---|---|
| interface | 3-wire SPI, 4-wire SPI |
| outline dimensions | 65.0 × 30.2mm |
| Mounting hole size | 3.0mm |
Comes with adapter board and FFC cable
Expanding display interface via FFC cable, for easy connecting to the e-paper
Onboard SPI control interface
for use with other controller boards like Raspberry Pi/Jetson Nano/STM32/Arduino
| VCC | 3.3V/5V |
|---|---|
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data / Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output |
| PWR | Power on/off control |
Product Show
for reference only, the e-paper screen is NOT included