Details
10.85inch e-Paper display, e-ink display, 1360 × 480, Black / White, SPI Interface
10.85″ e-Paper display
low power, wide viewing angle, paper-like effect without electricity
Ideal for price tags, shelf labels, industrial instruments...
Version Options
10.85inch e-Paper
raw display, without driver board
10.85inch e-Paper HAT+
with e-Paper Driver HAT
Features at a glance
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Comes with online development resources and manual (e-Paper Driver HAT circuit diagram, examples for Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32)
- Optional for e-Paper Driver HAT:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
- Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32 / ESP32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs
Specifications
| operating voltage | Raw display: 3.3V | display color | Black/White |
|---|---|---|---|
| with driver HAT: 3.3V/5V | |||
| interface | 3-wire SPI, 4-wire SPI | grey scale | 2 |
| outline dimensions | Raw display: 270.56 × 105.92 × 1.20 (mm) | partial refresh time | 0.6s |
| e-Paper Driver HAT: 65.00 × 30.50 (mm) | full refresh time | 3.5s | |
| display size | 259.76 × 91.68 (mm) | refresh power | <50mW |
| DOT PITCH | 0.191 × 0.191 (mm) | standby current | <0.01uA (almost none) |
| RESOLUTION | 1360 × 480 pixels | viewing angle | >170° |
Advantages of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Optional for e-Paper Driver HAT
Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, Jetson Nano
* for reference only, the Raspberry Pi in the picture is NOT included
Onboard SPI Control Interface
For Use With Controller Boards Like Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32
| PWR | Power control pin |
|---|---|
| BUSY | Busy status output |
| RST | External reset, low active |
| DC | Data / Command selection (high for data, low for command) |
| CS_S | e-paper S area chip selection, low active |
| CS_M | e-paper M area chip selection, low active |
| SCLK | SPI SCK pin |
| DIN | SPI MOSI pin |
| GND | Ground |
| VCC | 3.3V/5V |
Onboard Voltage Translator
Compatible With 3.3V / 5V MCUs
Application examples
Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags...