Introduction
6WD mobile platform can be installed on various types of control boards or controllers, such as raspberry pie. On the chassis with a 3mm mounting hole, horizontal 12mm, vertical 14mm hole spacing can be very different aspects of the installation of a variety of sensors, or additional expansion of other functions, such as the installation of a robot. The upper floor reserved for platform, raspberry platform installation hole.
Feature
- Damping soft and hard adjustable, through the extension spring.
- The road surface is uneven, shock absorption access will be adaptive to the road.
- 12 flange bearings are used in the link to reduce frictional resistance.
- Powerful expansion capabilities, you can arbitrarily modified.
Parameters
Vehicle size: 28 * 21 * 11.5cm
Vehicle quality: 1.4kg
Maximum load: 6kg
Operating voltage: 12V
Rated current: 350mA * 6
Engine original speed: 17000rpm
Output shaft speed: 500rpm
Rated torque: 5kg/cm
| Parameter | 6WD Version |
| Empty Vehicle Weight | 1700g |
| Maximum Load Capacity | 6500g |
| Wheelbase | 23mm |
| Operating Voltage | 6-12v |
| Motor Speed | 495rpm |
| Gear Reduction Ratio | 10:01 |
| Motor Current | 650mA * 6 |
| Motor Power | 4W * 6 |
| Travel Speed | 1.5m/s @12v |
| Servo Current | 7A * 6 |
| Number of Drive Wheels | 6 Drive 6 Wheels |
| Drive Wheel Material | Rubber (Front and Rear) |
| Driven Wheel Material | Metal (Middle) |
| Wheel Diameter | 15mm Metal Base Plate |
| Wheel Type | Rubber |
Shipping list
- Upper Plate * 1
- Lower Plate * 1
- Motor Fixing Plate * 6
- U-shaped Fixing Plate * 3
- U-shaped Shock Absorber Fixing Seat * 3
- Shock Absorber * 6
- Motor * 6 (GA25-370)
- Rubber Tire * 6 (72mm)
- Copper Column * 6 (17-4mm)
- Countersunk Head Screw * 8 (M3*30mm)
- Nylon Standoff * 12 (MR8327, 1/4 3/8)
- Round Head Screw * 8 (M2.5*14mm)
- Round Head Screw * 8 (M2.5*16mm)
- Hex Socket Head Cap Screw * 13 (M3*5mm)
- Round Head Screw * 55 (M3*10mm)
- Hex Nut * 15 (M2.5)
- Hex Nut * 26 (M3)
- Silicone Wire * 1500cm (20AWG)
- Micro Switch
- Phillips Screwdriver * 1