Note: All products are tax-inclusive.
The M5NanoC6 is a small, low-power IoT development board in the M5Stack development kit series. It has an ESP32-C6FH4 as the MCU, which supports Wi-Fi 6 and Zigbee, plus an infrared emitter for controlling IoT devices. The ceramic antenna keeps the wireless connection stable. The device also has programmable RGB beads for adding visual effects to projects. The Grove interface lets you connect different M5 devices (like those using UART, I2C, and other communication protocols) to the M5NanoC6. This lets developers expand the hardware in many ways. It is good for smart homes, industrial automation, health monitoring, and IoT devices.
The burning program needs to enter the download mode: press and hold the key (GPIO9), and then connect the data cable to enter the download mode.
The M5NanoC6 is the first WiFi-6-enabled core control board that supports the 2.4GHz Wi-Fi 6 protocol (802.11ax) and is backward compatible with 802.11b /g/n.
The WiFi 6 protocol has higher speed, greater capacity, lower latency, and stronger security than previous WiFi protocols.
Features
- ( 2.4Ghz ) Wi-Fi 6, Zigbee, and Thread, Matter wireless protocols are supported
- Built-in infrared LED and RGB
- Equipped with Grove port
- Ceramic antenna
- Small in size
Arduino IDE
Includes
- 1x M5NanoC6
Applications
- Intelligent housing system
- Industrial control system
- Environmental monitoring system
- Agricultural iot systems
- Medical treatment
- Consumer electronic
- Service robot
Specification
| Resources | Parameters |
|---|---|
| SoC | ESP32-C6FH4@RISC-V 160MHz，4M Flash， Wi-Fi 6，Zigbee 3.0，Thread 1.3, Matter，CDC |
| WIFI protocol | 2.4GHz Wi-Fi 6 protocol (802.11ax) and backward compatible with 802.11b /g/n |
| RGB | WS2812 |
| IR remote control parameters | The infrared emission distance of < 0° is 632CM The infrared emission distance of < 45° is 83CM The infrared emission distance of < 90° is 29CM |
| Grove outputs maximum current | DC 5V@600mA(Output capacity depends on USB power supply) |
| Standby current （Deep Sleep Mode) | Type-C Power supply DC 5V@125.5uA Grove power supply DC 5V@50uA |
| Standby current (ULP Mode) | Type-C Power supply DC 5V@252uA Grove power supply DC 5V@201.5uA |
| Operating current | In WIFI mode: DC 5V@106.2mA |
| WI-FI stretch test (antenna back up, back alignment test) | 54.9m |
| Operating temperature | 0-40°C |
| Product Size | 23.5*12*9.5mm |
| Package Size | 110*81*11mm |
| Product Weight | 2.5g |
| Package Weight | 11.2g |