The MKS CANable V1.0 module is an upgraded version of the CANable, capable of communication at data rates up to 1Mbit/s in the fast phase of CAN, making it ideal for product debugging, CAN bus control, and high-speed CAN applications in the automotive industry.
The MKS CANable Pro V1.0 module is a further enhanced version of the MKS CANable V1.0, featuring high-speed transmission rates and exceptional operational stability. Additionally, it offers stronger anti-interference capabilities, making it highly suitable for industrial debugging or motor-related applications.
Product Features
-
Both the MKS CANable V1.0 and MKS CANable Pro V1.0 modules use a high-performance ARM Cortex-M0 STM32F072C8T6 processor, running at a frequency of up to 48 MHz.
-
The MKS CANable V1.0 communication chip uses the highly integrated TJA1051T/3, with a CAN data rate of up to 1 Mbit/s. The MKS CANable Pro V1.0 features the ADM3053BRWZ fully isolated chip, offering high common-mode transient immunity of over 25 kV/μs, which enhances anti-interference performance.
-
The MKS CANable V1.0 supports up to 32 devices connected to a PC simultaneously. The MKS CANable Pro V1.0 can support 110 or more nodes on the bus, with inactive nodes not affecting the bus.
-
The MKS CANable V1.0 is disconnected from the bus (zero load) when not powered. The MKS CANable Pro V1.0 provides 2.5kVrms signal and power isolation.
-
It uses the LP5907MFX-3.3 low-noise LDO voltage regulator chip, with an output current of up to 250mA.
-
Features thermal shutdown protection.
-
Powered and communicates via USB interface.
-
No drivers are required for Windows or Linux systems.
Parameters
-
Mainboard Model: MKS CANable
-
Microprocessor: STM32F072C8T6 microprocessor
-
Communication Chip: TJA1051T/3 chip
-
Input Voltage: DC 3.3V-5V
-
Output Current: 250mA
-
Maximum Nodes: 32
-
Transmission Rate: 1Mbps
-
Operating Temperature: -40°C to +150°C
-
PCB Dimensions: 16mm x 40mm x 1.6mm