This 1 m M12 breakout cable is listed for Livox Mid-360S and Avia 2 LiDAR integration. It brings the sensor connection out to a data lead, power lead, and function wires for a custom installation.
The cable is an accessory only; the LiDAR sensor, network equipment, power source, and GPS receiver are not included. Check the connector and pin assignments against the manual for your exact sensor model before applying power.
Features
- 1 m length: suited to short sensor-to-platform routing.
- M12 sensor connection: 12-pin female aviation-style connector on the sensor end.
- Separate leads: breakout paths for Ethernet data, external power, and function signals.
- Time-sync integration: function wires can be used for a compatible PPS/GPS setup when connected according to the sensor manual.
Specifications
| Parameter | Value |
|---|---|
| Cable length | 1 m |
| Sensor-side connector | M12, 12-pin female |
| Data lead | RJ45 Ethernet connector |
| Other leads | Power cable and function wires |
| Main cable | Shielded PVC |
| Network wire | Shielded Cat5e PVC |
| Listed sensor models | Livox Mid-360S and Avia 2; verify connector and pinout for the exact configuration |
Applications
LiDAR data and power breakout
Route the M12 connection to separate Ethernet and power leads in a robotic or mapping platform.
GPS time synchronization
Use the function wires for a supported PPS/GPS synchronization source after checking the voltage level and wiring in the relevant sensor manual.
Resources
Packing List
| Item | Quantity |
|---|---|
| 1 m M12 breakout cable | 1 |
FAQ
No. The package lists one cable only.
The function wires are intended for compatible TTL/PPS-GPS connections. Check the sensor manual and the GPS source voltage before wiring.
No. It provides a power lead; a suitable external power source is required.
Do not assume so. Confirm the M12 connector and pinout for your exact model and hardware revision before connection.