HELTEC WiFi HaLow Module 902-928MHz 32.5Mbps 1-2KM

Regular price
€16,85
Sale price
€16,85
Regular price
€16,85
Sold out
Unit price
Quantity must be 1 or more

HT-HC01 is a compact, high-performance Wi-Fi HaLow module designed for long-range, low-power IoT applications. Operating in the 902–928 MHz sub-1 GHz band and compliant with the IEEE 802.11ah standard, it delivers data rates up to 32.5 Mbps @ 8 MHz and supports transmission distances of 1–2 km. Featuring a small LLC package with 38 header pins, it integrates easily into various PCBs. The module includes an ultra-long-range PA, high-linearity LNA, T/R switch, and a 32 MHz crystal oscillator, simplifying Wi-Fi HaLow connectivity for external hosts. Its low-power design supports hibernate modes and is ideal for battery-operated devices, extending battery life. With interfaces like SDIO 2.0 and UART, and an integrated DC-DC converter supporting 3.0V to 3.6V, HT-HC01 is a versatile solution for applications in smart homes, industrial automation, asset tracking, and more.

Main Features



Specifications

Parameters Description
Main Chip MM6108IQ
Power Supply 3.0~3.6V
HaLow Standard IEEE 802.11ah
Band Width 1/2/4/8MHz
Interface 38 Header Pins
Pin Package LLC
Operating temperature -40 ~ 85℃
Operating humidity 10%~90%, no-condensing
Dimensions 18.5*14*26mm
Data Rate 32.5 Mbps @ 8 MHz
Display onboard 1.14 inch TFT-LCD display

Application

Wi-Fi HaLow can seamlessly integrate with traditional Wi-Fi or Ethernet networks and is suitable for most IoT scenarios, especially those requiring long-range high-speed transmission.

Description

Pin Map

High light

LLC Encapsulation

  • small size and rich pin, can be very convenient to integrate in a variety of PCB
  • simplify Wi-Fi HaLow connectivity to external hosts for applications

Long-range transmission

  • up to 1km or and further within the visual distance
  • High data rate, single-stream max. data rate of 32.5 Mbps @ 8 MHz or 15 Mbps @ 4 MHz channel

powerful hardware

  • Support for various interface options, include SDIO 2.0, 2* UART
  • Integrated DC-DC converter supporting a voltage supply from 3.0V to 3.6V

Dimensions


FAQ

  1. The host should support SDIO v2.0 with SDIO clock speeds of up to 50 MHz. Slower clock speeds will impact the maximum achievable throughput.
  2. At a minimum, 2 x GPIOs are required as a CMOS output to drive the RESET and WAKE signals. If power save is used, a third GPIO is needed, set as a CMOS input to receive the BUSY signal from the module.
  3. The SDIO data and command lines should be pulled up with 10k-100k resistors as per the SDIO 2.0 specification.

When selecting a CPU host to interface via SPI to the MM6108-MF08551 module, consider the following recommendations to achieve the best throughput:

  • The host should support level-triggered interrupts.
  • The host should support full-duplex SPI mode.
  • The host should support DMA backed transactions on the SPI bus.

All unused digital IO pins must be pulled up or down to ensure they do not float. Failure to do so will result in a higher leakage current on the VDDIO supply.

Docs & Resource


Packing list

The default packing list without selecting any accessories is as follows:

Item Quantity
HC01 Module x1
Go to full site