DIY FM Radio Soldering Kit

€12,35
€12,35
€12,35
Sold out
Quantity must be 1 or more

Build your own FM radio with our DIY FM Radio Soldering Kit! This engaging kit features Bluetooth dual-channel audio, an LED sound-controlled spectrum, and various connectivity options, making it a perfect project for electronics enthusiasts.

Key Features:

  • FM Reception: Enjoy your favorite radio stations with a frequency range of 87.5MHz to 108.0MHz.
  • Bluetooth 5.0: Connect wirelessly to your devices for seamless music streaming.
  • Sound-Controlled LED Spectrum: Visually experience the music with mesmerizing LED patterns.
  • Infrared Remote Control: Operate from up to 10 meters away.
  • USB and TF Card Ports: Play music from USB drives and memory cards.
  • Audio Line-In: Easily connect external audio sources.
  • High-Quality Audio: Enjoy clear sound with high-definition quality.

Technical Specifications:

  • Operating Voltage: DC 5V (recommended using a 2A mobile fast charger)
  • Working Current: Greater than 1A (varies based on radio stations and music)
  • Static Current: Approximately 40mA (when music is not playing)
  • Output Power: 2 x 3W
  • PCB Size: 100mm x 30mm
  • Bluetooth Connection Name: JQ BT
  • Total Weight: 365g

Advanced Features:

  1. Supports high-quality music formats: MP3, WMA, WAV, FLAC, and APE.
  2. Built-in amplifier: Drive two 3W speakers simultaneously.
  3. Digital color display for easy navigation.
  4. Power-off memory function to retain settings.
  5. Supports MMC/SD/MMA cards and USB connections for added versatility.
  6. Recording feature: Press and hold the mode button to start/stop recording while in music playback mode.

Components List:

  • 4 x LM358 PIC chips
  • 4 x 8P IC sockets
  • 4 x 3MM white, pink LEDs
  • 4 x 3MM white, blue LEDs
  • 4 x 3MM white, green LEDs
  • 2 x 1N4148 diodes
  • 1 x DC power socket (5.52.11)
  • 1 x 3.5MM headphone jack with nut
  • 1 x 40MM red-black wire
  • 1 x 105 adjustable resistor
  • 1 x Bluetooth 5.0 decoding board
  • 2 x M3 screws/nuts
  • 1 x 4.7uF electrolytic capacitor
  • 1 x 100uF electrolytic capacitor
  • 4 x 100Ω through-hole resistors
  • 2 x 200Ω through-hole resistors
  • 5 x 510Ω through-hole resistors
  • 3 x 1K through-hole resistors
  • 1 x 2K through-hole resistor
  • 1 x 5.1K through-hole resistor
  • 3 x 10K through-hole resistors
  • 1 x 1M through-hole resistor
  • 2 x screw hole covers
  • 3 x red-black single-ended terminal wires
  • 2 x 104 ceramic capacitors
  • 1 x 3.5MM audio cable
  • 2 x 3W speakers
  • 1 x switch with opening
  • 1 x microphone
  • 1 x FM antenna
  • 1 x PCB
  • 1 x USB to DC power cable
  • 1 x Acrylic enclosure
  • 1 x Screw pack
  • 1 x Infrared remote control
  • 1 x FM antenna
Go to full site