Seeed Studio SenseCAP S2107 LoRaWAN Temperature Sensor PT1000

High-performance Guarantee

To ensure long‑term reliability in harsh outdoor conditions, the Seeed Studio SenseCAP PT1000 LoRaWAN® Temperature Sensor and the entire SenseCAP S210X series undergo 6 rigorous reliability tests to guarantee performance consistency throughout their lifecycle.

• High‑Low Temperature Test – verifies performance under extreme temperature conditions.
• Conformance Test – ensures consistent readings across multiple SenseCAP sensors.
• Waterproof Test – validates IP66 protection.
• Freezing Test – ensures stability in sub‑zero environments.
• Long‑Range Communication Test – checks packet integrity over long‑distance LoRaWAN® transmission.
• R&D and Production Test – ensures high manufacturing quality and pass rate.

* A device supports different frequencies and can be configured via the Bluetooth App.

** The battery life varies from data upload interval and distance between gateway.

LoRaWAN Frequency

S210x Devices are manufactured to support the universal frequency plan from 863MHz ~928MHz in one SKU. That is to say, every single device can support the frequency plans below:

The frequency plan setting is none by default and it will not transmit RF signal until it has been set by App via Bluetooth at the first power-up. And it can be changed to other frequency plans at any time.

Seeed Studio SenseCAP S2107 LoRaWAN® Temperature Sensor PT1000 measures temperature from -50°C to 300°C with high accuracy. Equipped with an industrial‑grade PT1000 temperature probe, the S2107 LoRaWAN Temperature Sensor supports wide‑range temperature detection suitable for demanding industrial scenarios.

PT1000 sensors (1000‑ohm platinum resistance thermometers) are widely used for precise temperature measurement. The SenseCAP S2107 PT1000 Temperature Sensor supports a three‑wire circuit and allows up to three PT1000 probes to be connected simultaneously, enhancing flexibility for multi‑point monitoring.

Direct‑contact temperature monitoring is essential in liquid detection, food monitoring, cold‑chain storage, industrial boilers, and aquaculture. The Seeed Studio SenseCAP S2107 LoRaWAN Temperature Sensor PT1000 is optimized for OTA updates with built‑in Bluetooth, enabling fast setup and configuration. With LoRaWAN® long‑range communication and an IP66 enclosure, the sensor delivers stable, low‑power, and reliable performance. Unlike wired devices, the S2107 Temperature Sensor is battery‑powered, simplifying deployment and allowing installation within minutes.

SenseCAP S210X is a series of wireless LoRaWAN® environmental sensors designed for industrial and outdoor applications.

The SenseCAP S2107 LoRaWAN Temperature Sensor PT1000 supports a transmission range of 2km in urban environments and up to 10km in line‑of‑sight scenarios, all while maintaining ultra‑low power consumption. With a replaceable battery offering up to 10 years of service life and an industrial IP66 enclosure, the S2107 Temperature Sensor operates reliably from -40°C to 85°C, making it suitable for harsh outdoor deployments.