Keyestudio RPI L298P motor drive shield adopts high-power motor driver chip L298P, which can directly drive two DC motors, with drive current up to 2A, and the motor output terminal uses eight high-speed Schottky diodes as protection.
The shield is fully compatible with various versions of Raspberry Pi. Meanwhile, the shield has leaded out each interface for simple connection of other sensors. This shield also has an IR receiver, so you can use infrared remote control to communicate with it.
To make it easier for you to mount the shield to your Raspberry Pi, we have specially provided you with 4 M2.5*20MM round-head screws, 4 double-pass M2.5*10MM copper pillars, and 4 M2.5 nickel-plating Nuts.
Features
-
Logic part input voltage: 5V
-
Driving part input voltage: 4.8 ~ 24V
-
Logic part working current Iss: ≤36mA
-
Driving part working current Io: ≤ 2A
-
Maximum power dissipation: 25W (T=75℃)
-
Control signal input level:
High level: 2.3V ≤ Vin ≤ 5V
Lowlevel:0V≤ Vin≤ 1.5V -
Working temperature: -25℃～＋130℃
-
Driver form: Dual power H bridge driving