Flex Sensor

This is a 2.2" bending sensor. The bending degree of the sensor can be converted into a change in resistance value, and the greater the bending, the higher the resistance.

This sensor can be used to make energy - gloves, see the application link for details.

Attention: Bending direction: The side with words is the inner side during bending. Avoid bending the end pin part (i.e. non - bending sensing part) when bending, otherwise it may cause damage.

Interface type: 2 - Pin metal pins (spacing 0.1")
The torsion sensor, 4.5" long, was used in an electronic glove. When the metal of the sensor is bent outward, the resistance of the sensor changes and the curvature can be detected.
Non - bending state resistance: ~9000ohms
90 degree bending resistance: ~14000ohms
180 degree bending resistance: ~22000ohms