Espressif ESP32 H2 WROOM 03 Thread/Zigbee/BLE Module

€3,20
€3,20
€3,20
Sold out
Quantity must be 1 or more

ESP32-H2-WROOM-03 is a powerful, generic Bluetooth® Low Energy and IEEE 802.15.4 combo module that has a rich set of peripherals. This module is an ideal choice for a wide variety of application scenarios related to Internet of Things (IoT), such as embedded systems, smart home, wearable electronics, etc.

ESP32-H2-WROOM-03 can be vertically soldered to a PCB board via wave soldering. The module has 8 available GPIOs.

At the core of this module is ESP32-H2, a 32-bit RISC-V single-core CPU that operates at up to 96 MHz. You can power off the CPU and make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds.

ESP32-H2 integrates a rich set of peripherals including I2C, I2S, SPI, UART, ADC, LED PWM, ETM, GDMA, PCNT, PARLIO, RMT, TWAI, MCPWM, USB Serial/JTAG, temperature sensor, general-purpose timers, system timer, watchdog timer as well as up to 19 GPIOs

Features

CPU and On-Chip Memory

  • ESP32-H2 embedded, RISC-V single-core 32-bit

LX7 microprocessor, up to 96 MHz

  • 128 KB ROM
  • 320 KB SRAM
  • 4 KB LP Memory
  • 2 MB or 4 MB in-package flash

Bluetooth

  • Bluetooth Low Energy (Bluetooth 5.3 certified)
  • Bluetooth mesh
  • Bluetooth Low Energy long range (Coded PHY, 125 Kbps and 500 Kbps)
  • Bluetooth Low Energy high speed (2 Mbps)
  • Bluetooth Low Energy advertising extensions and multiple advertising sets
  • Simultaneous Broadcaster, Observer, Peripheral and Central
  • Multiple connections
  • LE power control

IEEE 802.15.4

  • IEEE Standard 802.15.4-2015 compliant
  • Supports 250 Kbps data rate in 2.4 GHz band and OQPSK PHY
  • Supports Thread 1.3
  • Supports Zigbee 3.0
  • Supports Matter
  • Supports other application-layer protocols (HomeKit, MQTT, etc)

Peripherals

  • GPIO, I2C, I2S, SPI, UART, ADC, LED PWM, ETM, GDMA, PCNT, PARLIO, RMT, TWAI®,MCPWM, USB Serial/JTAG, temperature sensor, general-purpose timers, system timer, information about the module peripherals.

Integrated Components on Module

  • 32 MHz crystal oscillator

Antenna Options

  • On-board PCB antenna

Operating Conditions

  • Operating voltage/Power supply: 3.0 ~ 3.6 V
  • Operating ambient temperature: 105 °C version: –40 ~ 105 °C
Go to full site