Banana Pi BPI-WIFI5 Router (Full Kit) - SF19A2890S2 AC1200 Gigabit Router
The Banana Pi BPI-WIFI5 Router (full kit) is the bundled version of Banana Pi's low-cost Wi-Fi 5 router platform, aimed at users who want a more complete router package rather than a board-only purchase. The official Banana Pi BPI-WiFi5 Router documentation describes the platform as a high-performance dual-band router built around the Siflower SF19A2890S2 solution with an AN8855R Gigabit switch chip. Banana Pi positions it for small businesses, homes, and other networking environments where low cost, full Gigabit ports, and open-source software access are important.
Official Banana Pi materials list simultaneous 2.4G 2T2R and 5.8G 2T2R operation, 1 x Gigabit WAN, 3 x Gigabit LAN, 1200Mbps wireless throughput, four external high-gain antennas, and support for OpenWrt, EasyMesh R2, TR069, QoS, WDS, and production-ready customization workflows. Banana Pi also notes a new case design and OEM or ODM support for finished products. For reference, the hardware platform is published through the official Banana Pi shop page and the official Banana Pi announcement thread.
Technical Specifications
| Product Type | Bundled Wi-Fi 5 router kit / finished router package |
| Processor | Siflower SF19A2890S2 MIPS dual-core |
| CPU Frequency | 1GHz |
| Switch Chip | AN8855R Gigabit switch |
| Memory | 64MB DDR2 |
| Flash | 8MB |
| Wireless Bands | Dual-band 2.4G 2T2R and 5.8G 2T2R |
| Wireless Rate | Up to 1200Mbps |
| Wireless Standard | IEEE 802.11a / b / g / n / ac |
| WAN | 1 x 10/100/1000Mbps adaptive WAN |
| LAN | 3 x 10/100/1000Mbps adaptive LAN |
| Antenna | External 2 x 3.5dBi @ 2.4G and 2 x 5dBi @ 5G omni-directional high-gain antennas |
| Power Input | DC 12V / 1A |
| Buttons | Reset / WPS key |
| Size | 97 x 65 mm board size; finished product materials also show a case-oriented product design |
| Software Features | OpenWrt support, EasyMesh R2, TR069, QoS, WDS, guest Wi-Fi, DDNS, DMZ, IPv6 |
Board Layout & Label Guide
- SF19A2890S2 Main SoC Area - The router platform is built around Siflower's dual-core solution for entry-level Gigabit wireless routing.
- AN8855R Switch Section - The Gigabit switch chip supports the 1 WAN plus 3 LAN Ethernet layout.
- Gigabit WAN Port - The WAN interface is used for uplink, PPPoE, DHCP, or static-IP Internet access.
- Three Gigabit LAN Ports - The LAN side supports wired clients, switch-style use, and small office or home-network distribution.
- Dual-Band Radio Section - 2.4G and 5.8G operate together, with MU-MIMO aimed at smoother multi-device connectivity.
- External High-Gain Antenna Set - Official materials highlight four external antennas to improve range, penetration, and overall coverage.
- Independent 5.8G FEM Path - Banana Pi notes an external independent FEM to improve 5.8G wireless coverage.
- Reset and WPS Key - The shared key handles reset and WPS pairing workflows during setup or recovery.
- Power Input Area - The router uses a DC 12V / 1A input path for standard operation.
- Finished Product Housing - Banana Pi materials show case-ready finished product support and OEM or ODM customization around the core platform.
Application Scenarios
1. Home and Small Office Gigabit Router
The BPI-WIFI5 Router full kit fits homes and small businesses that want a finished dual-band AC1200 router with Gigabit wired ports and practical software features.
2. OpenWrt Learning and OEM Evaluation
Because Banana Pi publishes software resources and positions the hardware as an open-source router platform, the full kit is useful for firmware evaluation, feature testing, and customization planning.
3. Mesh and Managed Wireless Deployment
EasyMesh R2, TR069 support, guest Wi-Fi, and QoS functions make the platform suitable for managed wireless setups, light operator-style deployments, and controlled multi-user networks.
Packing List
- 1 x Banana Pi BPI-WIFI5 Router (full kit)
FAQ
Q: What chipset does this router use?
A: Banana Pi lists the Siflower SF19A2890S2 main chip together with the AN8855R Gigabit switch chip.
Q: What is the maximum wireless rate?
A: Official Banana Pi materials state a maximum wireless rate of 1200Mbps.
Q: Does it support both 2.4G and 5G?
A: Yes. It supports simultaneous 2.4G 2T2R and 5.8G 2T2R operation.
Q: How many wired network ports are available?
A: The router provides 1 Gigabit WAN port and 3 Gigabit LAN ports.
Q: Does it support OpenWrt?
A: Yes. Banana Pi explicitly lists OpenWrt support and publishes source and image resources for the platform.
Q: What does full kit mean here?
A: It indicates the more complete finished-product sales format rather than a board-only or core-platform listing.
Q: Can it be used in mesh or managed deployments?
A: Yes. Banana Pi lists EasyMesh R2, TR069, guest Wi-Fi, QoS, and WDS among the supported feature set.
Q: What types of users is it aimed at?
A: Banana Pi positions it for small businesses, home users, and other networking environments that need a low-cost finished Wi-Fi 5 router.